1
00:00:11,690 --> 00:00:15,870
Hello, welcome to the world of computer aided design with solid votes.

2
00:00:16,460 --> 00:00:23,600
In today's session, we are going to learn how to trim the to entities and solid votes from the entities.

3
00:00:23,690 --> 00:00:26,400
We have this trim entities, Tulear in the sketch.

4
00:00:26,420 --> 00:00:27,160
Come on, Manager.

5
00:00:27,950 --> 00:00:31,340
This tool is used to trim the unwanted entities in a sketch.

6
00:00:32,030 --> 00:00:34,010
You can use this to to trim a line.

7
00:00:34,430 --> 00:00:43,340
OK, Elipse Babila Circle Splaine, our center line intersecting and at the line up in the spatula center.

8
00:00:44,390 --> 00:00:50,850
You can also extend the sketch entities using the trim entities to trim the entities, choose the stream

9
00:00:50,930 --> 00:00:51,610
entities to.

10
00:00:52,280 --> 00:00:58,280
Once you click on it, it gets activated and the trim property manager is displayed by default.

11
00:00:58,470 --> 00:01:00,240
This forward trim option is selected here.

12
00:01:00,910 --> 00:01:08,120
This search area informs us about procedure of trimming and extending the sketched elements depending

13
00:01:08,120 --> 00:01:10,760
on the option selected in this options area.

14
00:01:11,590 --> 00:01:15,040
Let's say I want to trim this smaller rectangular portion here.

15
00:01:15,750 --> 00:01:17,470
I don't want this cushion in my sketch.

16
00:01:17,810 --> 00:01:20,770
So I'm going to do is I'm going to press and hold.

17
00:01:20,960 --> 00:01:27,530
Left mouse button and I'm going to drag the cursor over the entities that I do not want in my sketch

18
00:01:28,280 --> 00:01:28,840
like this.

19
00:01:33,690 --> 00:01:41,520
Once I'm done with trimming the entities just released to left mosfet and see a small rectangular portion

20
00:01:41,520 --> 00:01:42,750
is gone from the sketch.

21
00:01:43,170 --> 00:01:47,430
The second option here is the corner option selected.

22
00:01:48,590 --> 00:01:54,590
This option is used to trim or extend the sickest entities in such a way that the resulting entities

23
00:01:54,590 --> 00:01:55,330
form a condom.

24
00:01:56,150 --> 00:02:01,260
Suppose I want to create a corner at this point between this line segment and this lines.

25
00:02:03,060 --> 00:02:04,690
As the corner option is chosen here.

26
00:02:05,050 --> 00:02:08,060
So what I do is I select this line segment.

27
00:02:10,960 --> 00:02:11,540
This lengthy.

28
00:02:13,390 --> 00:02:15,440
And see, the rest of the portion is gone.

29
00:02:16,160 --> 00:02:17,280
And under what I just did.

30
00:02:18,650 --> 00:02:25,190
Let's say I want to create a corner at this point again, but this time I want this part of the sketch.

31
00:02:25,990 --> 00:02:30,140
I mean, again, you move the trim entities to the corner, current options already selected.

32
00:02:30,350 --> 00:02:33,650
So this time I'm going to select this side of the line segment.

33
00:02:34,190 --> 00:02:40,180
And this bottom side of the 90 can see, the portion of the sketch is gone from the screen.

34
00:02:40,880 --> 00:02:43,280
Third option here is trim of it inside.

35
00:02:43,940 --> 00:02:50,270
This option is used to trim the portion of a selected entity that likes inside to bonding entities.

36
00:02:50,990 --> 00:02:52,160
So click on this option.

37
00:02:52,630 --> 00:02:57,980
What I want to do is I want to trim this fight between these two boundaries.

38
00:02:58,770 --> 00:03:04,820
So first, I have to specify the boundaries between which I want to erase my sketch.

39
00:03:06,020 --> 00:03:07,220
This is my first boundary.

40
00:03:07,310 --> 00:03:08,600
And this is my second boundary.

41
00:03:09,120 --> 00:03:10,530
I can see in the same spot.

42
00:03:10,670 --> 00:03:13,090
You have to select the entities that we want to create.

43
00:03:13,580 --> 00:03:20,960
Now, I will create a window and select for these lines and see the path between these two boundaries

44
00:03:21,560 --> 00:03:22,600
is gone from the street.

45
00:03:23,200 --> 00:03:28,200
Again, look, the trim entities to at this time trim of a outside to is chosen.

46
00:03:28,910 --> 00:03:31,760
And we have to select two bombing entities.

47
00:03:31,940 --> 00:03:33,740
So this is my first bounding entity.

48
00:03:33,770 --> 00:03:34,990
And this is the second Montegut.

49
00:03:35,710 --> 00:03:37,720
And I want to trim outstay part.

50
00:03:37,820 --> 00:03:44,030
So these two line segments I click on this night and I will click on this link and see the bottom of

51
00:03:44,040 --> 00:03:48,970
these line segments, which was going beyond these two bounding objects is now gone from the street.

52
00:03:49,730 --> 00:03:52,670
Last option here is trimmed to protest selected.

53
00:03:53,300 --> 00:03:57,860
What this option does is it gives the selected entity to its closest intersection.

54
00:03:58,250 --> 00:04:04,390
Like if it considers this circle, this intersection the circle is having is with this attack.

55
00:04:05,280 --> 00:04:09,130
I take and this portion of the circle, it will be trim up to this.

56
00:04:10,880 --> 00:04:11,590
So click here.

57
00:04:12,400 --> 00:04:19,900
And this way, we have trimmed the circle up to its closest intersection, which was decent, lasting

58
00:04:19,900 --> 00:04:24,340
about the trim tools that we can also use the strip tool to extend entities.

59
00:04:24,850 --> 00:04:28,750
Suppose I want to extend this line segment up to this line thing.

60
00:04:29,350 --> 00:04:31,080
So what I do is right.

61
00:04:31,230 --> 00:04:34,330
Click in the trying area and then I'll choose this extent.

62
00:04:34,390 --> 00:04:35,290
Interpeace option.

63
00:04:37,460 --> 00:04:43,760
Now, if you think this line segment can see it goes up to the next intersection point in this way,

64
00:04:43,760 --> 00:04:50,180
we can also extend entities, even if we are using the TRIMM entities to thank you for watching this

65
00:04:50,180 --> 00:04:50,510
video.
