1
00:00:12,360 --> 00:00:15,720
Welcome to the world of computer aided design with solid quotes.

2
00:00:16,070 --> 00:00:16,500
Recession.

3
00:00:16,950 --> 00:00:20,940
You are going to learn how to create flex between different schist entities.

4
00:00:21,420 --> 00:00:22,560
Philip creates a tangent.

5
00:00:22,620 --> 00:00:29,460
OK, at the intersection of two entities, it trims or extends to entities to be filleted depending

6
00:00:29,550 --> 00:00:31,470
on the geometry of the sketched entity.

7
00:00:32,010 --> 00:00:33,270
If we create a rectangle here.

8
00:00:34,380 --> 00:00:38,700
Now I want to create a Philips at all the four corners of this rectangle.

9
00:00:39,300 --> 00:00:41,190
So I will go to this finished drop down here.

10
00:00:41,640 --> 00:00:46,410
And here we have this sketch finish to look on it and click on it.

11
00:00:46,620 --> 00:00:47,310
Sketch finished.

12
00:00:47,700 --> 00:00:49,440
Property manager is displayed here.

13
00:00:50,040 --> 00:00:56,820
The message area we are prompted to select a sketch what x or entities to fit it also to entities to

14
00:00:56,820 --> 00:00:57,330
select.

15
00:00:57,770 --> 00:00:59,640
This box is activated currently.

16
00:01:00,150 --> 00:01:05,100
Also the entities to select ListBox is activated in the Philip Barometer's area.

17
00:01:05,410 --> 00:01:08,540
We can see the current radius value for the filters NMM.

18
00:01:08,940 --> 00:01:11,340
You also have these two checkboxes.

19
00:01:11,730 --> 00:01:17,250
Keep constraint conures and dimension each filling checkbox currently board the checkboxes appeared.

20
00:01:18,490 --> 00:01:20,110
So what I'll do is I'll sneak.

21
00:01:21,380 --> 00:01:25,500
Keep constraint corners checkbox was so too creative fill.

22
00:01:26,600 --> 00:01:33,620
I can either selector or text point or I can individually select the entities between which I want to

23
00:01:33,620 --> 00:01:34,180
create the.

24
00:01:35,550 --> 00:01:39,050
So what I'm going to do is I'm going to select this line segment and this Lanting.

25
00:01:40,710 --> 00:01:42,610
Prevue or the is written here.

26
00:01:44,170 --> 00:01:49,760
We have selected keep constrained corners checkbox here after creating the flick flick under occupation.

27
00:01:50,460 --> 00:01:57,160
You can see we have this intersection constraint which was applied to the vortex of this rectangle.

28
00:01:58,210 --> 00:02:03,250
It is still there because we force SolidWorks to keep the constraint corners.

29
00:02:04,090 --> 00:02:09,440
Now I'm going to create flex at the remaining three corners of the rec deck and change the radius value

30
00:02:09,440 --> 00:02:10,060
to 50.

31
00:02:11,780 --> 00:02:16,970
And I'll create it at this corner, this corner and this corner.

32
00:02:19,410 --> 00:02:23,100
Keep in mind the dimension, each filled checkbox is cleared currently.

33
00:02:23,610 --> 00:02:24,810
I'm going to hit Doki button.

34
00:02:26,160 --> 00:02:30,300
We can see dimension is attached to only one of the fillets.

35
00:02:31,110 --> 00:02:35,790
What if I want to change the radius value for these two fillets in that case?

36
00:02:35,820 --> 00:02:37,290
We need to select this dimension.

37
00:02:37,350 --> 00:02:42,560
Each Philip checkbox under what I just checked, the animal, the schizophrenic.

38
00:02:42,570 --> 00:02:45,280
To this time I'm going to select this dimension.

39
00:02:45,300 --> 00:02:50,930
Each Philip checkbox on the okay button can see the dimensions are now attached to each filling.

40
00:02:51,300 --> 00:02:56,980
If I want to change this reduced value, I'll double click on it and change it to babysit.

41
00:02:58,230 --> 00:03:01,950
We can also create Feliks between two not intersecting entities.

42
00:03:02,700 --> 00:03:03,930
If we create two lines here.

43
00:03:13,870 --> 00:03:16,470
Now, I want to create a feeling between this line and this.

44
00:03:17,920 --> 00:03:22,660
So I will invoke the sketch Finitude and see the current 3D values.

45
00:03:22,730 --> 00:03:23,180
Fifteen.

46
00:03:23,290 --> 00:03:25,010
I'll change it to say 25.

47
00:03:26,920 --> 00:03:31,390
I think this line and this like that, I choose to occupy it.

48
00:03:32,380 --> 00:03:38,300
So it is not necessary that the two bodies should be intersecting each other to create a finished.

49
00:03:38,890 --> 00:03:41,560
We can also create Feliks between two not intersecting.

50
00:03:42,940 --> 00:03:44,920
This is all about the sketch fitted to.

51
00:03:45,640 --> 00:03:46,760
Thank you for watching this reading.
