1
00:00:12,340 --> 00:00:14,360
Welcome to the world of computer aided design.

2
00:00:14,630 --> 00:00:21,990
But Sunderbans, in today's session, we are going to learn how to offset entities in solid votes in

3
00:00:22,000 --> 00:00:22,460
the sketch.

4
00:00:22,480 --> 00:00:23,290
Come on, Manager.

5
00:00:23,560 --> 00:00:25,660
We have this tool offset entities.

6
00:00:26,870 --> 00:00:34,190
Let's suppose I want another circle here with the same center and which is at an offset distance of,

7
00:00:34,770 --> 00:00:37,070
say, 50 units from this existing circle.

8
00:00:37,670 --> 00:00:40,520
So what I do is I click on this offset entropies to.

9
00:00:41,870 --> 00:00:43,820
Click on it to offset entities.

10
00:00:43,940 --> 00:00:45,530
Property manager is disappearing.

11
00:00:46,630 --> 00:00:52,990
The bammy this area, the current offset distance value is set to change it to 50 year.

12
00:00:55,620 --> 00:00:56,940
And I select the so-called.

13
00:00:58,840 --> 00:01:01,510
A preview of the offset to the circle is displayed here.

14
00:01:02,930 --> 00:01:04,160
They start click on this okay button.

15
00:01:05,450 --> 00:01:10,220
So we have created another circle and an offset distance of 50 units from this existing.

16
00:01:12,150 --> 00:01:14,490
You can see the offset value is added to the sketch.

17
00:01:14,640 --> 00:01:15,660
It is 50 units.

18
00:01:16,020 --> 00:01:21,490
Also, the existing circle has converted itself into a construction geometry.

19
00:01:23,530 --> 00:01:26,320
This is because when we invoked the offset entities to.

20
00:01:28,130 --> 00:01:32,470
Add dimensions and base geometry checkbox was selected.

21
00:01:33,160 --> 00:01:39,130
But this time I'm going to uncheckable these checkboxes and create another circle.

22
00:01:45,610 --> 00:01:52,800
And again, go to the 60s to have it clear these add dimensions and base symmetry checkboxes.

23
00:01:55,030 --> 00:01:57,450
Officer Distances said 250 units, which is fine.

24
00:01:58,070 --> 00:01:58,890
I'll click on the save.

25
00:02:01,500 --> 00:02:02,570
And I'll talk about it.

26
00:02:03,750 --> 00:02:04,600
Now you can see.

27
00:02:05,570 --> 00:02:12,540
The existing circle is displayed as it was, also new dimensions are displayed in the sketch.

28
00:02:14,130 --> 00:02:16,190
There is again, invoked as of celebrities to.

29
00:02:17,770 --> 00:02:19,870
Now, I would try to offset dyslexic.

30
00:02:20,350 --> 00:02:21,170
And click on it.

31
00:02:22,540 --> 00:02:29,410
I can see the length is sitting in the downward direction and also distance value of 50 units.

32
00:02:30,340 --> 00:02:33,370
Also, the center is just not closed with these ups.

33
00:02:33,880 --> 00:02:38,060
This is because you have selected this cap and box here.

34
00:02:39,710 --> 00:02:42,970
And the OP's radio button is selected in this area.

35
00:02:44,540 --> 00:02:49,400
I don't want to captive's, what I do is I have an unchecked this checkbook's.

36
00:02:50,760 --> 00:02:52,820
In See the ox are gone from the street.

37
00:02:53,820 --> 00:02:59,900
You can also CAPTA ends by using lines, so select this checkbox and choose this latest video.

38
00:02:59,960 --> 00:03:04,040
But you can see now the skit just closed with these lines.

39
00:03:05,460 --> 00:03:11,240
If you want to convert the original existing entity into reconstruction geometry, you can choose the

40
00:03:11,240 --> 00:03:13,260
space geometry checkbox.

41
00:03:16,560 --> 00:03:23,440
You can also give us the dedication of offset by selecting this must check and see the dedication of

42
00:03:23,470 --> 00:03:24,850
offset has changed.

43
00:03:26,480 --> 00:03:31,000
You can also create a biometric offset by selecting this bi directional checkbox.

44
00:03:31,660 --> 00:03:35,620
Now this line is offsetting in both directions.

45
00:03:37,500 --> 00:03:38,760
After creating those sit.

46
00:03:39,670 --> 00:03:40,480
She was this okay?

47
00:03:40,700 --> 00:03:42,970
I get out of the offset entities to.

48
00:03:43,980 --> 00:03:44,970
Thank you for watching this week.
