1
00:00:10,630 --> 00:00:10,930
Hello.

2
00:00:11,550 --> 00:00:13,520
Welcome to the world of Computer-Aided Design.

3
00:00:13,770 --> 00:00:14,480
It's solitudes.

4
00:00:14,880 --> 00:00:19,290
In today's session, we have to learn how to offset edges or faces.

5
00:00:19,350 --> 00:00:27,030
Often, border agents or faces of a model can be offset by using this offset on suffixed to click on

6
00:00:27,030 --> 00:00:31,370
this 2D activated unsightly comit offset on surface.

7
00:00:32,100 --> 00:00:35,880
Property manager is displayed here in the offset pipe.

8
00:00:36,450 --> 00:00:37,400
We have two buttons.

9
00:00:37,590 --> 00:00:39,840
The first one is geodesic offset.

10
00:00:40,200 --> 00:00:42,150
Second one is Euclidian offset.

11
00:00:42,930 --> 00:00:44,970
Currently, this button is selected.

12
00:00:45,840 --> 00:00:47,670
This button creates an offset distance.

13
00:00:47,710 --> 00:00:52,290
That is the shortest possible distance between the selected edge and the resultant offset.

14
00:00:53,460 --> 00:00:58,140
Using this button, you can create offsets chinking to support Kōichi into account.

15
00:00:59,100 --> 00:01:04,260
Using this button, you can use offsets that does not include the curvature of suffix.

16
00:01:05,130 --> 00:01:12,210
Let us suppose I want to offset this edge off the more downward detection and an offset distance of

17
00:01:12,210 --> 00:01:12,780
fighters.

18
00:01:12,850 --> 00:01:15,540
So what I do is a change to offset value to five.

19
00:01:17,230 --> 00:01:18,750
And then I will select this D.H.

20
00:01:20,020 --> 00:01:23,040
Can see this off centers going in this direction.

21
00:01:24,040 --> 00:01:29,720
If I want this offset in downward direction, what I do is I'll take this, we must check box.

22
00:01:30,990 --> 00:01:32,990
Now, the offset is in the requite direction.

23
00:01:33,560 --> 00:01:36,490
We also have this check box here make offset construction.

24
00:01:36,900 --> 00:01:42,800
I select this checkbox and see the offset and entity has turned into a construction geometry.

25
00:01:44,240 --> 00:01:47,540
We can also use this tool to offset this face.

26
00:01:48,770 --> 00:01:54,790
So what I do is I choose the occupant and first I lacanian walk off certain surface to.

27
00:01:55,840 --> 00:02:04,630
Change to offset Valley to see two units and then select this face and see we have created a rectangular

28
00:02:04,900 --> 00:02:11,200
offset using all the edges of this face off, separate entities displayed as a construction geometry.

29
00:02:11,960 --> 00:02:15,220
You don't want that just until this table's.

30
00:02:16,240 --> 00:02:17,190
Then talk about.

31
00:02:19,810 --> 00:02:24,480
So this is how we use this offset on sulphates to thank you for watching this.
