1
00:00:11,440 --> 00:00:16,640
Hello, welcome to the world of computer aided design that SolidWorks this session.

2
00:00:17,330 --> 00:00:21,310
We are going to learn how to add relations to sketches and solid.

3
00:00:21,310 --> 00:00:27,850
Foote's geometric relations are the logical operations that are performed to add relationships such

4
00:00:27,850 --> 00:00:35,620
as engine perpendicular or Palla between the sketched entities, planes, access edges or what is its

5
00:00:36,370 --> 00:00:37,390
relations applied to.

6
00:00:37,390 --> 00:00:43,390
The sickest entities are used to capture the design intent, geometric relations constraint, the degree

7
00:00:43,390 --> 00:00:45,040
of freedom of the sketched entities.

8
00:00:46,090 --> 00:00:50,830
You can apply relations to a sketch by using the ad relations property manager.

9
00:00:51,850 --> 00:00:59,580
So to invoke this adulations property manager, we have this tool, you're in this dropdown ad relation,

10
00:01:00,110 --> 00:01:09,610
so click on it as I click on this to the ad relations property manager is invoked here and we are prompted

11
00:01:09,790 --> 00:01:16,990
to select the entities between which we want to add the geometric relations for to fall and select these

12
00:01:16,990 --> 00:01:18,340
two line segments.

13
00:01:19,270 --> 00:01:25,960
If there with any existing relations between these two line segments, those relations will be listed

14
00:01:26,040 --> 00:01:28,490
in this existing relations list, folks.

15
00:01:29,470 --> 00:01:35,410
And see, currently the status of these segments is under defined in the ad relations area.

16
00:01:35,740 --> 00:01:40,420
We have a list of relations that can be applied between these two entities.

17
00:01:40,870 --> 00:01:45,970
Like, if I want to make these two lines, Kulina, what I I'll do is I'll pick on discontinued option

18
00:01:45,970 --> 00:01:46,110
here.

19
00:01:46,820 --> 00:01:49,310
I can see both the lines are in the same line.

20
00:01:49,800 --> 00:01:54,340
If I choose this equal constraint with the line, segments will become equal in length.

21
00:01:55,150 --> 00:02:00,880
And if I apply this fixed constraint to these lines, we won't be able to change the location of these

22
00:02:00,880 --> 00:02:01,900
two line segments.

23
00:02:02,520 --> 00:02:10,270
Also, I can apply the horizontal constraint to both these lines so that these lines always remain horizontal

24
00:02:10,650 --> 00:02:11,200
in position.

25
00:02:12,310 --> 00:02:15,640
Let me try to apply a vertical relation between these two line segments.

26
00:02:16,840 --> 00:02:21,340
We can see we have this message here that the sketch is well defined.

27
00:02:22,130 --> 00:02:29,320
We kind of like to horizontal as well as what call relation between the two entities at a time the horizontal

28
00:02:29,650 --> 00:02:31,810
relation is applied between these two segments.

29
00:02:32,440 --> 00:02:38,320
It's impossible to apply a vertical constraint that replacing the relations line do is I click on this

30
00:02:38,350 --> 00:02:42,550
okay button and see the color of the line segments asked under it.

31
00:02:42,700 --> 00:02:49,240
This is because we have this one unwanted constraint here, which is displayed in red color and selected

32
00:02:49,430 --> 00:02:52,690
and and delete it and do the same for this line segment.

33
00:02:53,630 --> 00:02:59,090
Let us again invoke this Adulations Property Manager by clicking on this ad in relation to it.

34
00:03:00,250 --> 00:03:06,010
This time I'm going to select these two circles and see a tangent relation is already applied between

35
00:03:06,010 --> 00:03:09,410
these two circles in the existing relations listbox.

36
00:03:09,520 --> 00:03:11,840
We have a stand in relation to here.

37
00:03:12,370 --> 00:03:19,180
Now, in the ad relations area, we have different relations that can be applied between these two sections.

38
00:03:20,110 --> 00:03:24,550
If I click on this chord radio relation, what happens?

39
00:03:25,240 --> 00:03:27,510
Will the circle share the same center?

40
00:03:27,520 --> 00:03:27,780
Not.

41
00:03:27,970 --> 00:03:30,670
And both are equal in radius and under what I did.

42
00:03:31,480 --> 00:03:33,680
Tangent relation is already applied.

43
00:03:33,700 --> 00:03:34,900
Between these two circles.

44
00:03:35,770 --> 00:03:37,780
Now let's make what the circles equal.

45
00:03:38,230 --> 00:03:40,420
So I click on this equal relation.

46
00:03:40,420 --> 00:03:45,820
You can see the size of the larger circle has reduced to the size of this on a second.

47
00:03:47,080 --> 00:03:52,630
Also fixed the location of these two circles by clicking on this fixed relationship who want to go length

48
00:03:52,630 --> 00:03:54,100
to be equal for both the circles.

49
00:03:54,400 --> 00:03:55,060
Then you can apply.

50
00:03:55,060 --> 00:03:59,590
This constraint was often applying all the constraints to the sketches.

51
00:03:59,980 --> 00:04:03,320
Click on this OK button to get out of the ad relations too.

52
00:04:03,910 --> 00:04:08,200
This is how we add symmetric relations to sketches and solid votes.

53
00:04:08,680 --> 00:04:09,730
Thank you for watching this video.
