1
00:00:11,660 --> 00:00:11,880
Hello.

2
00:00:12,510 --> 00:00:14,430
Welcome to the world of Computer-Aided Design.

3
00:00:14,660 --> 00:00:17,370
It sort of goes into this session.

4
00:00:17,710 --> 00:00:23,650
You're going to learn about the principles of dimensioning guest entities and solid SolidWorks.

5
00:00:24,360 --> 00:00:26,490
After drawing sketches and adding relations.

6
00:00:26,880 --> 00:00:32,890
Most important step in creating a design is damaged and votes being a parametric software.

7
00:00:33,710 --> 00:00:38,960
The MTD on dimensioning is driven by the specified value, irrespective of the original size.

8
00:00:39,840 --> 00:00:41,030
Therefore, when you apply.

9
00:00:41,100 --> 00:00:47,400
And what if the dimensions of an entity, it is forced to change its size in accordance with the specified

10
00:00:47,400 --> 00:00:51,090
damage that can damage should any kind of entity?

11
00:00:51,360 --> 00:00:53,270
By using this smy dimension too.

12
00:00:54,420 --> 00:00:59,940
If you use this small damage to the back of dimension to be applied will depend on the bank of NTPC.

13
00:01:00,780 --> 00:01:10,350
For example, if you notice what I in to and then select a line signets can see automatically a linear

14
00:01:10,350 --> 00:01:12,050
dimension gets attached to the cluster.

15
00:01:12,600 --> 00:01:21,700
If you select an incline line and vertical line or horizontal dimension will be attached to the cause.

16
00:01:22,560 --> 00:01:28,370
Similarly, if you select a circle, diameter dimension will be attached to the course.

17
00:01:28,980 --> 00:01:32,460
If I select an OK radius, value will be attached to the cost.

18
00:01:33,380 --> 00:01:39,690
However, if you want to play a particular type of dimension and choose the type of tool from this small

19
00:01:39,730 --> 00:01:40,630
damage and play out.

20
00:01:41,430 --> 00:01:44,180
Let us apply this one dimension to this line, Cygne.

21
00:01:44,700 --> 00:01:48,380
So I click on this as damage tool and then I'll select this line.

22
00:01:48,440 --> 00:01:55,320
He can see and I mentioned value is attached to the cursor and click here to place the damage as I click

23
00:01:55,320 --> 00:01:56,920
on the screen to please the damage.

24
00:01:57,230 --> 00:02:05,790
The modified out of books is invoked can modify the default damage in value by using the spinner like

25
00:02:05,790 --> 00:02:06,210
this.

26
00:02:10,150 --> 00:02:14,550
By entering a new value in this edit box, if you make it too tough.

27
00:02:16,800 --> 00:02:22,310
And see, the length of the line segment has increased to 2000 double click on this damage in value

28
00:02:22,460 --> 00:02:23,220
again to invoke that.

29
00:02:23,330 --> 00:02:24,350
What if I dunno box.

30
00:02:25,310 --> 00:02:26,820
You can also drag the tummy.

31
00:02:27,410 --> 00:02:28,440
I didn't feel the spinner.

32
00:02:29,130 --> 00:02:29,960
Here's the tummy.

33
00:02:32,450 --> 00:02:33,340
To increase.

34
00:02:36,660 --> 00:02:38,290
Or decrease the damage in value.

35
00:02:39,070 --> 00:02:43,990
If you drag the tumble to a strike, the damage in value will be increased.

36
00:02:44,230 --> 00:02:47,530
If you drag the tumble to its left, the damage in value will be decreased.

37
00:02:48,160 --> 00:02:51,410
Also, some items are available here in this modified out of box.

38
00:02:52,600 --> 00:02:56,470
The first one is seen the current value and exit the dialog box.

39
00:02:57,820 --> 00:03:01,570
This button is used to accept the current value and a certain articles.

40
00:03:02,440 --> 00:03:06,320
Second button is restored to the original value and accept the dollar.

41
00:03:08,140 --> 00:03:16,120
And this button is used to restore the last damaged value applied to sketch and then set the next button.

42
00:03:16,450 --> 00:03:19,150
Is region rates the model with the current value?

43
00:03:19,790 --> 00:03:23,510
Let me change this value to any 800.

44
00:03:26,050 --> 00:03:33,800
Now I click on this region, draped the model with current value, but you can see a preview of the

45
00:03:33,800 --> 00:03:39,020
geometry of the sketch with the modified damage in value is displayed next Putnis.

46
00:03:39,530 --> 00:03:41,840
Give us a sense of the damage.

47
00:03:42,410 --> 00:03:45,290
This photo is used to flip the damaging value of an entity.

48
00:03:46,030 --> 00:03:50,900
This button will be available in the modified out of box and the selector dimension is a linear damage.

49
00:03:51,990 --> 00:03:58,750
Let me click on it can see the damage in value got flipped in other directions instead of twenty eight

50
00:03:58,750 --> 00:04:01,950
hundred value, minus twenty eight hundred is to.

51
00:04:03,070 --> 00:04:05,790
Next Putnis three six spin increments value.

52
00:04:06,430 --> 00:04:09,440
This button is used to modify the incremental value of the spinner.

53
00:04:10,300 --> 00:04:13,150
If you choose this button, inclement box is displayed.

54
00:04:14,080 --> 00:04:17,620
Enter and implement value in this title box.

55
00:04:18,310 --> 00:04:23,290
Suppose I want to dimensioned values to be incremented by a value of twenty units.

56
00:04:23,320 --> 00:04:24,250
So I type 20.

57
00:04:24,460 --> 00:04:31,630
And then at the center, if I tried to change the in value using the spinner, you can see that I mentioned

58
00:04:31,630 --> 00:04:36,950
value will change in addition, subtraction of 20 units each.

59
00:04:38,790 --> 00:04:41,920
Who said four zero seven two zero?

60
00:04:43,060 --> 00:04:46,010
Seven hundred tried to increase this value.

61
00:04:47,570 --> 00:04:49,580
Seven to zero, again, two seven four zero.

62
00:04:49,940 --> 00:04:54,250
So an increment or decrement of 20 units is applied to this damage.

63
00:04:55,310 --> 00:05:02,120
Last button is Mark Dimensioned to be imported into attrite, this button is chosen to make sure that

64
00:05:02,120 --> 00:05:06,200
the selected dimensioned is selected as a model annotation in the drawing views.

65
00:05:06,670 --> 00:05:11,190
It does, but it is not chosen selected damage and will not be generated in the drafting in the.

66
00:05:12,640 --> 00:05:18,350
After modifying the damage in value, click on the save the current value and exit the data and then

67
00:05:18,470 --> 00:05:25,210
click on this title button and press the escape key on your keyboard to get out of this smart dimension

68
00:05:25,270 --> 00:05:25,490
to.

69
00:05:26,760 --> 00:05:29,950
So these are the basic principles of dimensioning inside.

70
00:05:30,870 --> 00:05:31,880
Thank you for watching this video.
