1
00:00:09,940 --> 00:00:13,120
Hello, welcome to the world of computer aided design.

2
00:00:13,430 --> 00:00:13,920
Solid books.

3
00:00:14,740 --> 00:00:21,520
We are going to learn how to add horizontal and vertical dimensions to you in solid horizontal and vertical

4
00:00:21,520 --> 00:00:21,970
dimension.

5
00:00:22,000 --> 00:00:26,130
Tools are available in this smart dimension to take on the stone.

6
00:00:26,140 --> 00:00:32,060
I hope you can see we have this horizontal dimension in particular, dimension tools with ability.

7
00:00:32,500 --> 00:00:36,130
These tools are used to define the horizontal and vertical dimensions.

8
00:00:36,460 --> 00:00:38,890
The selected line between two points.

9
00:00:40,030 --> 00:00:46,600
Whites can be the end points of lengths, but OPCs are the center points of two arcs and obsess about

10
00:00:46,600 --> 00:00:46,930
Ebola.

11
00:00:47,760 --> 00:00:51,430
You can dimension a particular horizontal line by selecting a deck.

12
00:00:52,150 --> 00:00:53,830
Let's see how these tools look.

13
00:00:54,400 --> 00:01:00,080
Go to the small dimension, dropped out and choose this horizontal dimension to as I activate this tool.

14
00:01:00,210 --> 00:01:04,570
You can see here you had this message at select one or two edges.

15
00:01:04,660 --> 00:01:05,230
What this is.

16
00:01:05,440 --> 00:01:06,880
And then it takes location.

17
00:01:07,420 --> 00:01:11,320
So we need to define the points between which we want to place this damage.

18
00:01:12,070 --> 00:01:15,490
Suppose I want to put a dimension for this line segment.

19
00:01:15,740 --> 00:01:17,110
So I simply click it.

20
00:01:17,820 --> 00:01:20,010
I mentioned value will be attached to the course.

21
00:01:20,800 --> 00:01:26,380
Next thing I need to do is I need to place a cap to place it once I place it.

22
00:01:27,200 --> 00:01:34,720
That a box is despite the current damage and value shown in this edit box, we can't change it manually.

23
00:01:35,970 --> 00:01:44,280
I want to make it 90 Yoder's 90 percent up and see the damage in value passage to 90 in length of this

24
00:01:44,280 --> 00:01:45,300
mine has increased.

25
00:01:45,780 --> 00:01:51,390
Also, we have this dimensioned property manager of activated Lesterville out in this.

26
00:01:51,880 --> 00:01:53,030
I mentioned property manager.

27
00:01:53,040 --> 00:01:55,770
It's time for a little bit different buttons on it.

28
00:01:56,160 --> 00:01:57,900
Let's see the function of each.

29
00:01:57,900 --> 00:02:02,970
But the first one is like the default attributes to selected dimensions.

30
00:02:03,150 --> 00:02:07,470
This button is used to apply the different attributes to the selected damages.

31
00:02:07,800 --> 00:02:11,740
Attributes include tolerance decision Adelstein.

32
00:02:12,520 --> 00:02:17,220
I mentioned text and saw this option is generally used to modify the settings.

33
00:02:17,330 --> 00:02:21,980
I'd like to add dimension and then to this to the default settings on that time.

34
00:02:22,860 --> 00:02:25,350
Second button is an updated state.

35
00:02:26,400 --> 00:02:27,720
Had an updated style button.

36
00:02:28,070 --> 00:02:30,840
Used to add a damaged style of current document.

37
00:02:31,080 --> 00:02:31,960
What a could time.

38
00:02:33,300 --> 00:02:38,580
I've been looking the damage and property manager said the attributes using various options in this

39
00:02:38,580 --> 00:02:39,360
property manager.

40
00:02:39,860 --> 00:02:46,290
Next, choose this ad or update the style button can see the ad or opted to state that the box is displayed,

41
00:02:46,980 --> 00:02:53,150
not enter a new name for the dimension style that you are trying to create and create a new damage inside

42
00:02:53,160 --> 00:02:54,990
with the name My Style.

43
00:02:56,290 --> 00:03:02,550
Right now click on the keyboard and you can see in this set current style.

44
00:03:02,720 --> 00:03:04,710
This was not my style.

45
00:03:04,720 --> 00:03:09,360
One is displayed and it is the same dimensioned style which we just created.

46
00:03:10,020 --> 00:03:16,650
You can apply any created into style, but already existing damage and style to a dimension using this

47
00:03:16,890 --> 00:03:17,600
dropdown list.

48
00:03:18,850 --> 00:03:21,130
Now, the third button we have is delete.

49
00:03:21,180 --> 00:03:21,630
It's time.

50
00:03:22,500 --> 00:03:28,080
This button is used to delete a damaged inside, delete a damage in style, selected image and style

51
00:03:28,530 --> 00:03:31,380
from the current stripe dropdown list.

52
00:03:31,920 --> 00:03:33,900
I currently my style one is chosen.

53
00:03:34,550 --> 00:03:35,760
Now I I'll click on this.

54
00:03:35,970 --> 00:03:37,430
Create a style but it.

55
00:03:39,240 --> 00:03:42,090
You'll see the newly created damage in style.

56
00:03:42,350 --> 00:03:48,270
It's now deleted because no more displayed in the dropdown list and again created damage inside.

57
00:03:48,790 --> 00:03:49,570
So click on this.

58
00:03:49,630 --> 00:03:54,930
Add or update this type of type, the name of the stylus.

59
00:03:55,030 --> 00:03:57,730
My style to.

60
00:03:59,210 --> 00:04:00,220
And I'm here to help you out.

61
00:04:00,910 --> 00:04:03,270
But the next button is save a.

62
00:04:04,480 --> 00:04:09,390
But it is used to severe damage in style so that it can be retrieved in some other document.

63
00:04:09,950 --> 00:04:13,170
Currently, my style is chosen in this dropdown list.

64
00:04:13,860 --> 00:04:19,860
Now I click on this, see this style button and see the same as dialog box is displayed.

65
00:04:20,670 --> 00:04:23,700
I can see this dimensions style to any location.

66
00:04:23,730 --> 00:04:27,570
I know that it can be retrieved in some other document.

67
00:04:28,140 --> 00:04:35,640
So I received the style through the desktop, the name my style to see a button.

68
00:04:36,660 --> 00:04:40,920
Now what I'm going to do is I'm going to open a new document by clicking on this new button.

69
00:04:43,550 --> 00:04:48,620
I want to retrieve the diamonds in style, which we created in the other document to this document.

70
00:04:49,490 --> 00:04:51,740
So go to the sketch.

71
00:04:52,450 --> 00:04:55,890
Make it plain for sketching a line segment.

72
00:04:57,520 --> 00:04:59,780
I mentioned it using the horizontal dimension to.

73
00:05:03,510 --> 00:05:05,950
They call it out.

74
00:05:06,770 --> 00:05:13,460
I want to know what the style which we created in the document to this document, I click on this notes

75
00:05:13,460 --> 00:05:17,210
style button as I click on it.

76
00:05:17,450 --> 00:05:19,280
We have this open dialogue box displayed here.

77
00:05:21,500 --> 00:05:22,430
Go to the desktop.

78
00:05:22,670 --> 00:05:23,010
I see.

79
00:05:23,090 --> 00:05:24,340
Did your style.

80
00:05:24,380 --> 00:05:29,780
We created select this style and you do open button and see.

81
00:05:29,960 --> 00:05:38,210
Now that style is imported into the straight and it is displayed in this dropdown and closes.

82
00:05:39,670 --> 00:05:40,910
In fact, the previous one.

83
00:05:41,930 --> 00:05:42,610
Next will out.

84
00:05:42,650 --> 00:05:45,380
We have in this property manager is Stalins procedure.

85
00:05:46,070 --> 00:05:49,750
The first thing we have is this tolerance type dropdown list.

86
00:05:50,410 --> 00:05:54,970
This dropdown list is used to apply columns to a average default.

87
00:05:55,540 --> 00:05:56,650
An option is selected.

88
00:05:57,140 --> 00:06:01,430
Therefore no tolerance is applied to the divulgence make on this dropdown list.

89
00:06:01,910 --> 00:06:04,820
Different options available will be displayed.

90
00:06:06,300 --> 00:06:06,960
First option.

91
00:06:07,030 --> 00:06:14,080
This basic option, basic damnation is the one that is enclosed in a rectangle displayed a basic dimension.

92
00:06:14,450 --> 00:06:17,990
Select the dimension that you want to display as the basic damage.

93
00:06:19,100 --> 00:06:21,940
Currently, it's 90 damage in value selected.

94
00:06:22,700 --> 00:06:26,150
Now select this basic option on this dropdown.

95
00:06:28,290 --> 00:06:33,600
Conceived this time, and she does not in genetic tangles, indicating that it isn't basic damage.

96
00:06:34,590 --> 00:06:41,280
Second option in this dropdown list is bilateral or bilateral tolerance breaks the maximum and minimum

97
00:06:41,730 --> 00:06:44,880
variations in the value of a dimension that is acceptable.

98
00:06:45,250 --> 00:06:53,490
I can see as we selected the bilateral option from this dropdown list, maximum variation and minimum

99
00:06:53,490 --> 00:06:54,210
variation.

100
00:06:54,660 --> 00:06:55,800
Boxes are labeled.

101
00:06:56,880 --> 00:07:04,680
We can enter the maximum and minimum Venetian values here and type point zero two zero seven here and

102
00:07:04,860 --> 00:07:06,990
type point zero one zero.

103
00:07:06,990 --> 00:07:10,320
And then in the minimum wage issue and it flows into.

104
00:07:12,680 --> 00:07:14,930
See, the damage in value is updated.

105
00:07:15,790 --> 00:07:23,360
You can also see like this parenthesis, checkbox display, the maximum and minimum variation values

106
00:07:23,960 --> 00:07:28,010
between these parenthesis next option and the strong down distance limit.

107
00:07:29,190 --> 00:07:31,700
Maximum and minimum permissible damage.

108
00:07:31,820 --> 00:07:36,450
The values of an entity are displayed on selecting this limited option.

109
00:07:37,590 --> 00:07:45,480
Again, we have this maximum variation and minimum variation if boxes in which you can enter, the next

110
00:07:45,630 --> 00:07:47,800
option here is symmetric.

111
00:07:47,850 --> 00:07:48,180
Option.

112
00:07:49,170 --> 00:07:56,580
Select this option and see how we have maximum video, should edit on symmetric tolerance is displayed

113
00:07:57,120 --> 00:08:00,430
in the US and minus signs, as you can see, too.

114
00:08:02,040 --> 00:08:06,980
Currently, the median value is points to change it to zero.

115
00:08:08,040 --> 00:08:09,030
Let's enter.

116
00:08:11,570 --> 00:08:19,410
And see the damage and values updated, next option in this dropdown is minimum on this minimum option.

117
00:08:19,830 --> 00:08:27,870
Minimum symbol is added to the damage as the fix implies that the dimension value is the minimum value

118
00:08:28,050 --> 00:08:31,910
that is allowed to the design extortionist maximum.

119
00:08:32,730 --> 00:08:40,260
See, now X symbol is added to the dimension as the fix implies that the damage to the value is the

120
00:08:40,260 --> 00:08:44,830
maximum value that is allowed in the design instruction in this dropdown is fit.

121
00:08:45,960 --> 00:08:50,570
This option is used to apply fit according to the whole fit and Scheft fit system.

122
00:08:51,360 --> 00:08:57,480
So after choosing the fixed option from the stolen state dropdown list, I call this classification

123
00:08:57,480 --> 00:08:58,230
dropdown list.

124
00:08:58,710 --> 00:08:59,710
Define the type of.

125
00:09:01,920 --> 00:09:04,640
I want to press fit between the shaft and the hole.

126
00:09:05,190 --> 00:09:09,150
So you need to choose the required option from this dropdown list.

127
00:09:10,050 --> 00:09:17,330
Next, we have this will fit dropdown list to the standard from this Holford dropdown list.

128
00:09:18,890 --> 00:09:24,950
Six feet nine option after selecting the options from the classification dropdown list and who fit dropdown

129
00:09:24,980 --> 00:09:30,070
list, standups matching the selected will fit will be displayed in this Shaffi.

130
00:09:30,810 --> 00:09:35,660
I've noticed you can see you're getting a message that no match has been found for this classic.

131
00:09:38,240 --> 00:09:44,350
It is required to choose the options carefully from these dropped on this next roll out.

132
00:09:44,390 --> 00:09:51,650
We have is this primary value of this rollout used to modify the name and value of the damage?

133
00:09:52,870 --> 00:09:53,670
We have this name.

134
00:09:53,720 --> 00:09:54,380
It pops here.

135
00:09:54,740 --> 00:09:56,520
You can change the name of the steam engine.

136
00:09:56,780 --> 00:10:00,770
Using this edit box can also change the damage in value using this.

137
00:10:01,550 --> 00:10:06,120
And currently the value is set to 90 to you get two hundred and.

138
00:10:07,110 --> 00:10:13,230
With the damage in value has changed from 90 to 100 extra loud, is this dimension extra?

139
00:10:13,930 --> 00:10:17,080
So loud is used to add text and symbols to the damage.

140
00:10:17,920 --> 00:10:19,600
This textbooks is so loud.

141
00:10:19,730 --> 00:10:26,780
It used to add text dimension in text displayed in the textbooks symbolizes the damaged and value.

142
00:10:27,940 --> 00:10:30,360
You can add text before or after the damaging event.

143
00:10:31,270 --> 00:10:35,350
This is about the different options that have available in the dimension property.

144
00:10:36,630 --> 00:10:41,900
Sitting all the barometers in this damage to property manager Mike on this goes down off button.

145
00:10:42,140 --> 00:10:43,320
Get out of the damage.

146
00:10:44,950 --> 00:10:45,070
You.
