1
00:00:09,230 --> 00:00:13,300
Hello, welcome to the world of computer aided design with solid books.

2
00:00:13,710 --> 00:00:20,920
Today, we are going to learn how to apply linear diameter dimensioning to sketches and solid votes.

3
00:00:21,670 --> 00:00:23,530
And see, I have a model created here.

4
00:00:24,330 --> 00:00:25,400
It is a reward model.

5
00:00:25,990 --> 00:00:29,470
And if I go to the sketch of this model of the design tree.

6
00:00:31,500 --> 00:00:32,800
Double-Click on the sketch.

7
00:00:33,440 --> 00:00:35,870
A double clicking on the sketch from the design tree.

8
00:00:36,130 --> 00:00:38,290
Now we add into the stitching enlightenment.

9
00:00:38,950 --> 00:00:40,750
Now I need to orient this sketch.

10
00:00:41,920 --> 00:00:42,550
I'm going to.

11
00:00:43,190 --> 00:00:46,550
What I didn't do is I press the spacebar on my keyboard.

12
00:00:47,590 --> 00:00:50,120
You have this orientation, Wuxia.

13
00:00:52,210 --> 00:00:53,140
Excite click on this.

14
00:00:53,800 --> 00:00:56,290
To button him and see.

15
00:00:56,380 --> 00:01:01,380
This is the sketch that he will feature, the one which is displayed in Brooklyn.

16
00:01:02,620 --> 00:01:05,200
You can see the more the front face.

17
00:01:05,260 --> 00:01:06,400
Is it succah?

18
00:01:08,510 --> 00:01:12,390
Where I need to do this, I need to apply a diameter dimension on this so-called.

19
00:01:13,550 --> 00:01:18,860
So what I do is I go to the sketch, come on, manager, and they know the spot damage to.

20
00:01:20,170 --> 00:01:28,780
Now, I will click on this line segment and then I'll click on this scintillate, you can see a damage

21
00:01:28,790 --> 00:01:36,020
and values attached to the Khoza damage value is 500 units, which is the diameter of the circle.

22
00:01:37,300 --> 00:01:40,510
But this damage in value displayed as diameter.

23
00:01:40,880 --> 00:01:46,250
And the cursor is below the center line and drag the cursor about the center length.

24
00:01:46,540 --> 00:01:49,700
You can see the damage in value has reduced to 250.

25
00:01:50,950 --> 00:01:55,640
What I do is I like drag the person below the center light and then I pleased this damage.

26
00:01:58,240 --> 00:02:05,930
Now, this dimension represents that it is a diameter dimension and this sketch is going to be sketch

27
00:02:05,930 --> 00:02:13,400
for the reward feature, creating the linear diameter dimension, conduct a dialogue button to get out

28
00:02:13,520 --> 00:02:14,440
of the spot damage.

29
00:02:14,500 --> 00:02:21,250
And this is how we apply linear diameter dimensions to sketches and soldered focused.

30
00:02:21,710 --> 00:02:22,740
Thank you for watching this week.
