1
00:00:11,770 --> 00:00:12,100
Hello.

2
00:00:12,790 --> 00:00:16,000
Welcome to the load of computer aided design with solid votes.

3
00:00:16,690 --> 00:00:22,870
In today's session, we are going to create the sketch that is displayed on the screen after creating

4
00:00:22,870 --> 00:00:23,380
the sketch.

5
00:00:23,590 --> 00:00:26,980
We are going to add the required dimensions and relations to this sketch.

6
00:00:27,850 --> 00:00:31,750
As you can see, the sketches symmetric about the central axis.

7
00:00:33,860 --> 00:00:41,200
So to create this sketch, we are going to use the dynamic mirror to use the dynamic mirror to be first

8
00:00:41,410 --> 00:00:43,600
meet to create a central axis.

9
00:00:45,290 --> 00:00:47,840
So click on the link to it.

10
00:00:49,820 --> 00:00:51,100
Mikio for the first point.

11
00:00:54,300 --> 00:01:00,240
Creative Take the Mind segment that will act as the central excess to create a sketch.

12
00:01:02,130 --> 00:01:09,180
I'm going to Dudes Sketch, Choose and choose this dynamic mirror tune from this Floud.

13
00:01:12,570 --> 00:01:14,120
Jose, the dynamic media tool.

14
00:01:14,240 --> 00:01:17,260
You can see the minute property manager is involved.

15
00:01:19,090 --> 00:01:26,020
In the message rollout, we have prompted to select a sketch line, a medium model s to meet about.

16
00:01:26,150 --> 00:01:32,810
So I will select this line as the symmetry axis that clicked on this line segment.

17
00:01:33,080 --> 00:01:36,660
You can see the symmetry symbols are now appearing on this line.

18
00:01:38,090 --> 00:01:39,740
Now, let's start creating the sketch.

19
00:01:40,100 --> 00:01:41,900
I'll use this point as the start point.

20
00:01:44,190 --> 00:01:50,080
On the line to let's to fall, we need to create a horizontal line segment of length.

21
00:01:51,560 --> 00:01:53,660
Units as the total length is time to units.

22
00:01:57,140 --> 00:02:00,080
Click here for the flash point and then.

23
00:02:02,370 --> 00:02:04,680
Because I chose 15 units of length.

24
00:02:05,120 --> 00:02:07,120
Click the next.

25
00:02:07,530 --> 00:02:12,390
I need to create a line segment, what they call a line segment of length.

26
00:02:12,600 --> 00:02:13,290
Ten units.

27
00:02:15,870 --> 00:02:17,340
This is the take a line segment.

28
00:02:18,240 --> 00:02:20,640
And what is on the line segment of length 10 units?

29
00:02:23,170 --> 00:02:25,390
Take a line segment of linked to 10 units.

30
00:02:27,530 --> 00:02:30,700
Again, this horizontal line segment of LinkedIn units.

31
00:02:34,400 --> 00:02:40,240
Now, I will create what take a line segment, which may just 40 percent, 50 units in length.

32
00:02:43,090 --> 00:02:43,600
Click here.

33
00:02:44,270 --> 00:02:55,230
Next, a click on the cemetery line knows the sketch as we have chosen the dynamic mirror tube.

34
00:02:55,400 --> 00:02:59,250
So the sketch on the underside of the symmetry axis is created automatically.

35
00:03:01,210 --> 00:03:05,220
Next thing we need to do is we need to create this font of the sketch.

36
00:03:07,420 --> 00:03:07,630
Right.

37
00:03:07,630 --> 00:03:14,880
Click into drunkie and choose the select option to get out of the line, to click on the line, to snap

38
00:03:14,890 --> 00:03:18,520
to this point, which is five minutes away from this point.

39
00:03:21,000 --> 00:03:23,550
Now, the length of this line segment is 10 units.

40
00:03:24,230 --> 00:03:27,390
I'm Peter Reticle Lane segmental 10 units.

41
00:03:29,640 --> 00:03:32,490
I mean, I need to create a horizontal line of length.

42
00:03:32,520 --> 00:03:33,270
Ten units.

43
00:03:36,130 --> 00:03:37,980
And I have to go in a downward direction.

44
00:03:38,650 --> 00:03:39,870
The length of five minutes.

45
00:03:42,960 --> 00:03:45,120
Log in, click on the cemetery access.

46
00:03:49,590 --> 00:03:50,460
Close coach.

47
00:03:52,870 --> 00:03:58,740
Now, the only thing left in this pot is this bottom line segment, right, click in the drying area.

48
00:03:58,950 --> 00:04:00,790
Click on the select option again.

49
00:04:00,810 --> 00:04:04,530
Choose the line to close the sketch like this.

50
00:04:09,540 --> 00:04:14,320
After confusing this bottom line segment, right, click in the drying area and choose a synecdoche.

51
00:04:18,990 --> 00:04:20,880
We had completed this part of the sketch also.

52
00:04:21,540 --> 00:04:32,100
Now we need to create these two circles, center out the circle is at a distance of 10 units on this

53
00:04:32,100 --> 00:04:35,020
kind of point and on x axis and along LAX.

54
00:04:36,660 --> 00:04:43,230
So I choose them so I can do and I is create a circle at any location.

55
00:04:43,700 --> 00:04:49,200
And I let that exact relations please the circle at the correct location.

56
00:04:51,040 --> 00:04:55,890
I'll create a circle, can see the dynamic value for the surplus.

57
00:04:56,090 --> 00:04:56,400
Then.

58
00:04:58,930 --> 00:05:02,140
So I look at a circle which is having it, it is a five units.

59
00:05:05,120 --> 00:05:09,160
Can see a dynamic copy of the surplus created on the other side of the cemetery line.

60
00:05:09,580 --> 00:05:15,130
Now, after creating the so-called Reichling in the drawing area and choose the synecdoche, I will

61
00:05:15,130 --> 00:05:16,690
create this Champollion.

62
00:05:17,440 --> 00:05:20,050
Go to this dropdown here and choose this.

63
00:05:20,240 --> 00:05:26,140
Skip Kemfert, do as I click on the sketch MFA, do the sketch MFA property manage.

64
00:05:26,140 --> 00:05:28,120
It is displayed here in the Tampa.

65
00:05:28,120 --> 00:05:30,910
Fatemi does well out.

66
00:05:31,140 --> 00:05:34,720
We have this distance distance video button selected here.

67
00:05:35,460 --> 00:05:38,510
And the distance value set here is Tenement, which is the Higuain.

68
00:05:40,830 --> 00:05:44,220
And click on this line segment first, and then I look on this line segment.

69
00:05:46,110 --> 00:05:47,040
Get this message.

70
00:05:47,880 --> 00:05:50,050
He used to use option from this message box.

71
00:05:51,400 --> 00:05:53,080
I didn't click on this line segment.

72
00:05:56,190 --> 00:05:59,160
Then click on this line segment to create the other chimp.

73
00:05:59,730 --> 00:06:03,370
Now we need to place these circles and appropriate locations.

74
00:06:06,320 --> 00:06:12,020
Listen, hold the control key on your keyboard, select center point of the circle.

75
00:06:13,000 --> 00:06:16,160
Next, select this one, the point of the line.

76
00:06:16,200 --> 00:06:21,910
After selecting these two points, you can see the properties property manager is displayed here and

77
00:06:22,340 --> 00:06:26,660
in the ad relations throughout different relations on display.

78
00:06:27,870 --> 00:06:32,670
I want to make these two points partisan, so I click on this horizontal option here.

79
00:06:34,200 --> 00:06:36,360
Can see the circles have changed their location.

80
00:06:36,690 --> 00:06:43,800
Now they are at the desired location and units away from this point and 10 units away from this point

81
00:06:44,460 --> 00:06:51,380
after placing the circles click on the post item button except the properties property manager.

82
00:06:52,050 --> 00:06:54,290
In this way, we have created the sketch X.

83
00:06:54,330 --> 00:07:00,900
Thing we need to do is we need to add dimensions to this sketch, to the smarm dimension, to the.

84
00:07:02,430 --> 00:07:08,770
And then click on this Bottom Line segment first and see the damage and values attached to the KOSA.

85
00:07:09,880 --> 00:07:15,100
They said at the appropriate location, a simple left click off your mouse and you left.

86
00:07:15,100 --> 00:07:17,320
Begin the drawing area to face the dimension.

87
00:07:18,030 --> 00:07:25,510
Modify that box is displayed on the same the current value button in the same way.

88
00:07:25,660 --> 00:07:28,020
You can add other dimensions to the sketch.

89
00:07:29,820 --> 00:07:36,190
You call this line segment and place the damage man, we call this line segment in place, the damage

90
00:07:36,230 --> 00:07:36,430
that.

91
00:07:44,240 --> 00:07:50,630
When I place this dimension, you can see a message boxes here make damage and ruin because adding this

92
00:07:50,630 --> 00:07:54,500
dimension value will make the sketch or defined or unable to solve.

93
00:07:54,830 --> 00:07:58,510
So I will make this dimension to click on the okay button.

94
00:08:01,010 --> 00:08:04,690
Next and select this line segment, I'm pleased the damage that.

95
00:08:08,430 --> 00:08:10,800
This line segment and this time segment.

96
00:08:11,920 --> 00:08:14,620
Is this distance value?

97
00:08:15,630 --> 00:08:18,330
What I jumped the sketch to the low one edge of this park.

98
00:08:21,600 --> 00:08:25,400
On this line segment, least the damaged value.

99
00:08:28,630 --> 00:08:35,450
The save the current rally button, I mean, click on this line segment, please.

100
00:08:35,510 --> 00:08:36,350
Did I mention value?

101
00:08:46,010 --> 00:08:46,820
Finally, this one.

102
00:08:53,020 --> 00:08:56,420
Next, we need to add the dimensions of these two circles.

103
00:08:57,700 --> 00:09:03,010
It's like the circle in C diameter values attached to the close up.

104
00:09:03,100 --> 00:09:03,820
I would listen to.

105
00:09:07,090 --> 00:09:13,650
We can't save the current value, but now we need to add this time into dimension, import the circles

106
00:09:13,770 --> 00:09:14,340
like this.

107
00:09:16,720 --> 00:09:21,780
So that a single damage in value and her present or the.

108
00:09:22,960 --> 00:09:29,780
You can see damage or damage and is selected and we have this damage and property manager here, the

109
00:09:29,800 --> 00:09:30,960
Diamond Shin next area.

110
00:09:31,390 --> 00:09:32,260
What I did do is.

111
00:09:34,830 --> 00:09:35,600
Type two.

112
00:09:38,050 --> 00:09:40,550
Into that, I like space here.

113
00:09:42,450 --> 00:09:43,640
Now I'll click on this.

114
00:09:44,330 --> 00:09:51,300
Those up button can see this dimension value is now representing diabetes for two seconds.

115
00:09:52,250 --> 00:09:52,940
This one and.

116
00:09:54,860 --> 00:09:58,620
So after adding all the required dimensions make on this close, Delaplane.

117
00:10:00,480 --> 00:10:02,880
And this week, we have created this sketch.

118
00:10:03,890 --> 00:10:04,560
He also added.
