1
00:00:10,480 --> 00:00:13,600
Hello, welcome to the world of computer aided design.

2
00:00:14,280 --> 00:00:16,070
What's your decision?

3
00:00:16,650 --> 00:00:24,640
Yeah, going to create this sketch, creating the sketch you are going to add that is quiet relations

4
00:00:24,670 --> 00:00:26,680
and dimensions to this sketch.

5
00:00:27,910 --> 00:00:30,340
So let us stop this sketch.

6
00:00:30,450 --> 00:00:36,940
First of all, we'll create two sections, one with the radius value 163, other with the radius value.

7
00:00:36,970 --> 00:00:42,050
One seven of these circles will be sharing the same center point.

8
00:00:42,490 --> 00:00:49,120
So click on the circle to split any in the drawing area to specify the center point for.

9
00:00:51,490 --> 00:00:53,440
Going click anywhere in the drying area.

10
00:00:54,660 --> 00:01:01,950
Specify the radius value as you click to specify the radius value circle property manager, it's active

11
00:01:01,950 --> 00:01:02,320
it.

12
00:01:04,790 --> 00:01:08,720
This changed the radius value to 163.

13
00:01:08,960 --> 00:01:09,480
Using that.

14
00:01:11,730 --> 00:01:12,810
Click on this button.

15
00:01:15,310 --> 00:01:16,990
Again, choose to so-called to.

16
00:01:18,830 --> 00:01:21,260
Gap, the centerpoint of the previously created circle.

17
00:01:23,360 --> 00:01:26,420
Specify Gadhafi's center point for the other Sokol's.

18
00:01:27,350 --> 00:01:32,580
In clicking the drawing area changed the radius value to 170.

19
00:01:35,350 --> 00:01:40,630
Because the key button, you can notice that this sketch is the sketch.

20
00:01:40,720 --> 00:01:41,770
Four hundred vote margin.

21
00:01:42,550 --> 00:01:45,910
So we need to create the scintillate Nick on the line, too.

22
00:01:46,810 --> 00:01:52,000
Next on the top quadrant of a circle specified, it does the first point of the line segment.

23
00:01:52,650 --> 00:01:56,790
Click at the bottom part and specify it at the end point of the line.

24
00:01:58,630 --> 00:01:58,840
Right.

25
00:01:58,840 --> 00:02:01,080
Click on the drawing area and choose to select option.

26
00:02:03,330 --> 00:02:06,430
Now we want this line segment to act as a center line.

27
00:02:06,820 --> 00:02:07,680
So click on it.

28
00:02:09,400 --> 00:02:16,450
Nine properties property manager has displayed the options to allow select this for Construction Checkbook's.

29
00:02:17,990 --> 00:02:18,660
And hit talk.

30
00:02:19,920 --> 00:02:22,320
Can see the line has changed into a construction line.

31
00:02:23,930 --> 00:02:28,880
Next, we need to offset this scintillate and this dedication to create the spot.

32
00:02:31,710 --> 00:02:38,790
Diskettes, you can see the distance between the center line and this line segment is it is six divided

33
00:02:38,790 --> 00:02:43,000
by two units, which is to three years plus tofile.

34
00:02:43,650 --> 00:02:50,940
I'm an officer of the center line in the right side with an offset value of forty three units.

35
00:02:51,660 --> 00:02:56,820
So like on the offset entities to jinx the offset value for a three.

36
00:03:00,030 --> 00:03:01,350
Next, click on the center line.

37
00:03:03,820 --> 00:03:08,990
We don't want the line to be off centered in this direction, so I will click on this list checkbox.

38
00:03:10,620 --> 00:03:11,580
Everything looks fine.

39
00:03:12,150 --> 00:03:13,140
I click on this document.

40
00:03:15,690 --> 00:03:23,460
Now, the distance between this line segment and this one is seven units, MUSKETT units, just fifteen

41
00:03:23,460 --> 00:03:25,780
units in the game.

42
00:03:27,650 --> 00:03:33,340
They come to offset entities to this time, I'll change the satellite into 15 years.

43
00:03:35,720 --> 00:03:41,630
Think this line segment and again, select the US checkbox and choose to occupy it.

44
00:03:46,550 --> 00:03:49,160
And see damage and values that are dashed.

45
00:03:51,770 --> 00:03:57,910
Sketcher, let us trim the unwanted part on the preventatives to.

46
00:03:59,240 --> 00:04:00,980
And from this Bible to sketch.

47
00:04:02,130 --> 00:04:11,770
The sport is fucked and this fucked up area, this Dysport.

48
00:04:22,930 --> 00:04:23,850
Click on the button.

49
00:04:24,870 --> 00:04:28,260
Next thing we need to do is we need to create these groups.

50
00:04:33,570 --> 00:04:40,810
First of all, I don't believe this line selected and hit the delete key on your keypad or the length

51
00:04:40,810 --> 00:04:42,280
of this tropical segment is.

52
00:04:44,700 --> 00:04:51,290
Hundred minus ninety units, but just 10 units of before creating this line segment.

53
00:04:51,830 --> 00:04:54,410
I'm going to fix the location of this point.

54
00:04:54,440 --> 00:04:59,210
And despite recent whored, the control keys on your key back.

55
00:04:59,590 --> 00:05:01,850
I think this point and this point.

56
00:05:04,600 --> 00:05:09,840
Properties, property managers, and would choose the fix option from the ad relations for.

57
00:05:12,560 --> 00:05:13,880
Next, click on the Okimoto.

58
00:05:15,320 --> 00:05:23,190
Now to the line to get this point specified as the first end point of the line segment excreted what

59
00:05:23,190 --> 00:05:31,130
they call line segment by clicking what to go down with that click, clicking the drawing, getting

60
00:05:31,130 --> 00:05:38,630
out to the select option next to the small dimension to select this line signal change the length of

61
00:05:38,630 --> 00:05:39,960
any top ten in fist enter.

62
00:05:41,100 --> 00:05:46,790
Now we need to create these groups one, two, three and four.

63
00:05:47,230 --> 00:05:48,500
These clues are Fortnum.

64
00:05:49,850 --> 00:05:50,910
Selling the line to.

65
00:05:56,390 --> 00:05:57,200
Plus point.

66
00:06:01,950 --> 00:06:06,550
Keep on sketching the groups like this.

67
00:06:24,980 --> 00:06:32,780
Now, actually in the drying area and to the synecdoche, the spot dimension to seeing the sketch.

68
00:06:36,210 --> 00:06:43,290
The length of this part of the crew is five minutes in length of this, what we call segment is also

69
00:06:43,290 --> 00:06:44,040
five minutes.

70
00:06:49,300 --> 00:06:55,420
So after choosing the spot damage to look on this segment and face the damage and then change it to

71
00:06:55,420 --> 00:06:56,110
five units.

72
00:06:58,640 --> 00:07:00,490
It's click on this what they call segment.

73
00:07:06,500 --> 00:07:09,140
Again, changed the length value to five minutes.

74
00:07:11,820 --> 00:07:18,370
Going to talk about it now, we need to make the length of all the parties on ON2 and reticle segments

75
00:07:18,670 --> 00:07:19,640
equal to fighters.

76
00:07:20,500 --> 00:07:23,250
So again, Chris, hold the control key on your keyboard.

77
00:07:24,120 --> 00:07:25,510
Link this line segment.

78
00:07:26,350 --> 00:07:26,910
This one.

79
00:07:27,610 --> 00:07:28,060
This one.

80
00:07:28,720 --> 00:07:29,170
This one.

81
00:07:30,010 --> 00:07:30,430
This one.

82
00:07:32,010 --> 00:07:33,890
Not lastly.

83
00:07:33,910 --> 00:07:34,240
This one.

84
00:07:37,970 --> 00:07:44,730
The properties property manager under the add relation to rule out juice, this EqualLogic.

85
00:07:48,620 --> 00:07:51,660
All the horizontal line segments have changed the length.

86
00:07:52,350 --> 00:07:53,960
You click this one in just five.

87
00:07:58,200 --> 00:08:03,820
Blandly select all the vertical line segments missing, including the control of key.

88
00:08:12,530 --> 00:08:14,260
Choose DayQuil off.

89
00:08:19,360 --> 00:08:22,670
You Pacific facilities, what do the lines like this one.

90
00:08:23,330 --> 00:08:23,760
This one.

91
00:08:24,170 --> 00:08:24,640
This one.

92
00:08:25,100 --> 00:08:25,580
And this one.

93
00:08:26,880 --> 00:08:27,980
Eight to DayQuil.

94
00:08:30,180 --> 00:08:34,580
Now we need to create this line, segment length of this line segment will be.

95
00:08:36,570 --> 00:08:40,670
Don't distance from this point that this is under units.

96
00:08:41,360 --> 00:08:42,440
This one is 10 units.

97
00:08:42,970 --> 00:08:43,350
Fifteen.

98
00:08:43,530 --> 00:08:43,910
Twenty.

99
00:08:44,020 --> 00:08:44,610
Twenty five.

100
00:08:45,030 --> 00:08:45,410
Thirty.

101
00:08:45,830 --> 00:08:46,400
Thirty five.

102
00:08:46,760 --> 00:08:48,290
Forty and forty five minutes.

103
00:08:48,950 --> 00:08:51,620
So this line segment will be length.

104
00:08:52,040 --> 00:08:54,950
Hundred and forty five minutes, which is fifty five units.

105
00:08:56,560 --> 00:08:58,750
So I would again create a line segment.

106
00:09:02,730 --> 00:09:05,680
The line to be clear on the first point.

107
00:09:07,930 --> 00:09:16,480
Guinevere specified the end point of the scene, play into the select option, into the small dimension

108
00:09:16,480 --> 00:09:16,810
to.

109
00:09:19,640 --> 00:09:21,040
James, the damage in Vanuatu.

110
00:09:21,400 --> 00:09:22,550
Fifty five years.

111
00:09:25,170 --> 00:09:27,520
Now we need to create this horizontal line segment.

112
00:09:28,250 --> 00:09:33,600
Let me just eight units in length is on the line segment of eight units in length.

113
00:09:33,810 --> 00:09:36,520
Then in what they call line segment, we're just putting units in.

114
00:09:38,960 --> 00:09:50,640
Click on the link to the start point and the horizontal line segment could take a magazine to the spot

115
00:09:50,640 --> 00:09:55,000
dimension to this line segment and change the damage menu to keep.

116
00:09:58,730 --> 00:10:01,530
This line segment changed the dimension of an.

117
00:10:02,690 --> 00:10:05,870
This entered into the line to.

118
00:10:07,830 --> 00:10:10,530
Here for the first point and then close to stage.

119
00:10:16,190 --> 00:10:20,210
I think in the drying area and then choose the select option, get out of the line.

120
00:10:21,850 --> 00:10:23,680
Next, we need to trim unwanted pork.

121
00:10:24,850 --> 00:10:28,900
Click on the stream entities to trim this part of the night.

122
00:10:31,050 --> 00:10:35,110
And this week we have created a sketch for a solid two or more.
