1
00:00:08,890 --> 00:00:12,400
Well, welcome to the world of Computer-Aided Design.

2
00:00:12,570 --> 00:00:12,950
Solve solid.

3
00:00:14,220 --> 00:00:14,970
Today's session.

4
00:00:15,170 --> 00:00:19,230
You're going to learn how to measure distances between the two entities.

5
00:00:19,860 --> 00:00:28,390
Two points between two ops using the measure to measure two is used to measure the perimeter and angle,

6
00:00:28,650 --> 00:00:31,110
radius and distance between the length points.

7
00:00:31,140 --> 00:00:36,540
So faces and planes and sketches, models, assemblies are measured.

8
00:00:36,720 --> 00:00:39,210
Tool is available in this devaluate.

9
00:00:39,480 --> 00:00:40,260
Come on, manage it.

10
00:00:42,810 --> 00:00:47,010
It's letting it come on manager might not be present by default.

11
00:00:47,140 --> 00:00:52,660
In your case, what you can do is you can right click on any of the command managers and select this

12
00:00:52,830 --> 00:00:55,370
evaluate option from the flower display.

13
00:00:56,590 --> 00:00:58,960
Now, here we have this method to click on.

14
00:01:00,470 --> 00:01:05,970
As I click on the Mazid tube, we have this measure, toolbar district, US thing.

15
00:01:06,180 --> 00:01:09,850
In this measure, two bodies oxa good measurements dropped.

16
00:01:11,790 --> 00:01:12,800
Click on this town narrow.

17
00:01:12,810 --> 00:01:14,490
You can see we have four options here.

18
00:01:15,450 --> 00:01:18,420
Let's find a center to center and select this option.

19
00:01:18,950 --> 00:01:24,990
Now I will select the two circles and see the center, the center distance.

20
00:01:26,980 --> 00:01:28,410
Do Circles is displayed here.

21
00:01:31,270 --> 00:01:33,010
Second option is minimum distance.

22
00:01:34,300 --> 00:01:39,520
This option, I can see the minimum distance between the two Salkeld is displayed, which means the

23
00:01:39,520 --> 00:01:42,960
distance between this quadrant and this quadrant is this.

24
00:01:45,930 --> 00:01:46,920
Maximum distance.

25
00:01:48,350 --> 00:01:53,270
Maximum distance, which is the distance between two outgoing quadrants of the SOCOs is displayed here.

26
00:01:56,730 --> 00:02:00,190
Some distance using this custom distance option.

27
00:02:00,940 --> 00:02:06,940
You can customize the distance calculation options for each selection separately.

28
00:02:08,000 --> 00:02:09,010
Plus, top condition.

29
00:02:09,940 --> 00:02:11,370
Set it to maximum.

30
00:02:13,330 --> 00:02:18,370
Second up condition as set out to M. You can see now for the first stop.

31
00:02:20,060 --> 00:02:21,770
Measurement point is this outer.

32
00:02:22,760 --> 00:02:26,250
Because we have selected a maximum option in this area.

33
00:02:27,200 --> 00:02:30,860
And for the second arc, which is here, we have selected the minimum option.

34
00:02:31,100 --> 00:02:34,810
So this quadrant is selected as a measurement point.

35
00:02:36,620 --> 00:02:41,150
Second thing here is units, precision units.

36
00:02:41,150 --> 00:02:44,170
Precision Bottom is used to set the type of units and they have.

37
00:02:45,070 --> 00:02:51,720
I click on this button, you can see we have this major units decision dialog box, this used document

38
00:02:51,720 --> 00:02:52,280
settings.

39
00:02:52,310 --> 00:02:53,960
Radio button is selected by default.

40
00:02:55,710 --> 00:03:02,310
So the different units in position of the document are used while mentioning that everybody can also

41
00:03:02,310 --> 00:03:08,210
sector type of units and their precision for measuring the entities, set the type of units and their

42
00:03:08,250 --> 00:03:16,800
procedure selectors use custom settings, radio, but other options in this idiotic to run this length

43
00:03:16,800 --> 00:03:18,720
unit dropdown list.

44
00:03:19,400 --> 00:03:24,030
You can set the units and options of linear measurement of the entity.

45
00:03:25,490 --> 00:03:32,990
This dropped down this you can select any type of unit millimeters, Micron's centimeters, he does

46
00:03:33,170 --> 00:03:34,970
feet, inches and so on.

47
00:03:39,020 --> 00:03:46,400
So we have the scientific notation, checkboxes checkbox is selective display the value in scientific

48
00:03:46,790 --> 00:03:50,090
notation, use decimal places.

49
00:03:50,090 --> 00:03:55,960
Spinner is used to control similar equity you see by measuring the interpeace.

50
00:03:57,440 --> 00:04:04,880
I select this used little units, checkbox I can display and measured value in two different units.

51
00:04:05,720 --> 00:04:12,560
I guarantee every primary Lenku it is military does set the second one to 10 inches.

52
00:04:15,470 --> 00:04:21,020
So that is the case with this and, you know, unit dropdown list, click on this dropdown list.

53
00:04:21,440 --> 00:04:24,410
Currently, the angular value can be measured in degrees.

54
00:04:25,040 --> 00:04:29,540
You can select the other options from destruct on list, ASPO your requirement.

55
00:04:31,190 --> 00:04:38,330
This decision, this has been a is used to set the decimal accuracy of angular measurements, presenting

56
00:04:38,420 --> 00:04:40,040
all the better meters in this data box.

57
00:04:40,070 --> 00:04:41,030
Click on Documentum.

58
00:04:42,640 --> 00:04:48,460
They can see the major value is displayed in Amman as well as Ventus.

59
00:04:50,580 --> 00:04:55,850
Next, we have this show, X, Y, Z measurements button, this button is activated by default.

60
00:04:57,080 --> 00:05:02,150
So the dxp y and D and values of the cynic and entities are displayed in the drawing area.

61
00:05:03,550 --> 00:05:08,720
If you deactivate this button, only the distance between the selected entities that will be displayed.

62
00:05:09,470 --> 00:05:11,420
Next thing is this point to point.

63
00:05:11,630 --> 00:05:14,600
But I define this point to point.

64
00:05:14,600 --> 00:05:20,840
Button is activated as it is a venue select two points of what this is of any entity or model.

65
00:05:21,020 --> 00:05:25,910
The distance between the selected points will be displayed in this case.

66
00:05:27,070 --> 00:05:29,670
Distance value is one twenty seven by nine forever.

67
00:05:33,770 --> 00:05:40,160
Next thing is this projected upon button is used to specify the location where the selected entity should

68
00:05:40,160 --> 00:05:40,670
be project.

69
00:05:41,360 --> 00:05:49,220
You can project the selected entity on the screen on a specificly measurement history button is used

70
00:05:49,220 --> 00:05:53,100
to build all the measurements made during the current session of SolidWorks.

71
00:05:54,060 --> 00:06:01,400
Select on this measurement button measurement history data is displayed which will display all the measurements

72
00:06:01,400 --> 00:06:02,770
made during the transition of.

73
00:06:04,830 --> 00:06:10,700
The last button we have here is just speak, send somebody the extensive items he's used to keep the

74
00:06:10,700 --> 00:06:15,080
measurement sensor or the selected measurement, the measurement changes.

75
00:06:15,370 --> 00:06:17,870
Then the software gives an alert message.

76
00:06:19,700 --> 00:06:23,030
This is all about measuring distance between entities.

77
00:06:25,280 --> 00:06:26,060
Thank you for watching.
