1
00:00:10,230 --> 00:00:13,530
Welcome to the world of computer aided design with SolidWorks.

2
00:00:14,910 --> 00:00:20,080
In today's session, we are going to learn how to modify the field orientation in solid books.

3
00:00:20,910 --> 00:00:26,360
You can manually change the view orientation using some predefined standard views by using defined.

4
00:00:26,380 --> 00:00:29,430
You invoke these standard views.

5
00:00:30,330 --> 00:00:32,640
Choose this new orientation.

6
00:00:32,640 --> 00:00:34,610
Fly out from this view.

7
00:00:34,740 --> 00:00:35,610
Heads up toolbar.

8
00:00:36,260 --> 00:00:40,320
So click on the Style Network and see this play out.

9
00:00:40,320 --> 00:00:43,160
This involved in looking this far out.

10
00:00:43,440 --> 00:00:47,180
You can see the view selected is displayed around the market.

11
00:00:48,000 --> 00:00:49,020
This is the view selected.

12
00:00:50,740 --> 00:00:54,720
You can either choose the required view from this flat.

13
00:00:57,920 --> 00:01:04,230
On this view, select and orient the model that the standard views, different predefined views are

14
00:01:04,230 --> 00:01:05,510
available in this view selector.

15
00:01:07,070 --> 00:01:14,490
If in predefined views are available in this play out, like if I want to see the right side view of

16
00:01:14,490 --> 00:01:21,530
this model, so I click on the right option, you can see the model is oriented with the right sanction.

17
00:01:22,830 --> 00:01:25,360
Now, I want to see the top view on this map.

18
00:01:26,310 --> 00:01:31,840
So choose this top option from this flat similarily.

19
00:01:32,110 --> 00:01:36,970
I can use this view selector, the model to any standard view.

20
00:01:38,150 --> 00:01:44,290
Again, if I want this right side view and click on this site of the viewer select and again, go to

21
00:01:44,290 --> 00:01:49,180
this play out, you can see we have this Norman option here.

22
00:01:49,830 --> 00:01:55,930
I think this option can reorient the view not much to a viewing direction of the selected face.

23
00:01:57,750 --> 00:02:04,210
What I would do is suppose I wanted the view to be oriented to this face of the more select this face.

24
00:02:04,390 --> 00:02:08,940
Then I'll go to this play out and I'll choose this normal option.

25
00:02:09,850 --> 00:02:13,150
If you do not select a face before choosing this normal two option.

26
00:02:13,470 --> 00:02:17,850
The view will be oriented to the rotated coordinate system on the x y, please.

27
00:02:18,650 --> 00:02:22,550
The other way to end the model is using this view toolbar.

28
00:02:23,260 --> 00:02:25,500
What do you do about shoes?

29
00:02:26,610 --> 00:02:32,010
Modified auction flag will be displayed and then choose.

30
00:02:32,950 --> 00:02:37,620
Then choose this orientation auction in seat orientation dialog boxes display.

31
00:02:39,450 --> 00:02:42,180
Let's see these different options available in the standard box.

32
00:02:43,700 --> 00:02:51,190
Last thing here is an unbidden the dilo, we noticed that when we selected few, but in look to the

33
00:02:51,280 --> 00:02:56,710
orientation dollar box is automatically close if you want to stack of books to be retained on the screen.

34
00:02:57,130 --> 00:03:02,560
You can find it at a location by choosing this then unbent the dialogue button.

35
00:03:03,700 --> 00:03:04,510
Click on this button.

36
00:03:05,230 --> 00:03:06,550
Now I can move.

37
00:03:06,550 --> 00:03:08,830
The dialogue goes to the desired location.

38
00:03:09,790 --> 00:03:17,110
Now I can move the delegates to the desired location and to start a box can be pinned to this location.

39
00:03:17,680 --> 00:03:19,340
Now it will not be closed.

40
00:03:19,660 --> 00:03:21,100
When you perform any operation.

41
00:03:22,450 --> 00:03:23,350
Next we have this.

42
00:03:23,530 --> 00:03:26,320
You select a budget by default.

43
00:03:26,380 --> 00:03:28,280
It is chosen as it is.

44
00:03:28,460 --> 00:03:32,820
The silico views will be displayed around, the more these select a view.

45
00:03:33,010 --> 00:03:36,050
I used to orient the model and the required view is an.

46
00:03:37,360 --> 00:03:44,170
Selecting the required view of the model from the view selector model will be oriented to the selected

47
00:03:44,170 --> 00:03:46,890
view and aligned normal to the difficult business.

48
00:03:48,040 --> 00:03:51,240
So we can turn on off the display of your selector using this.

49
00:03:51,250 --> 00:03:55,840
But like currently, you selector is not displayed around the model.

50
00:03:56,410 --> 00:03:58,570
So I'll click on this button to read the speech.

51
00:03:59,860 --> 00:04:01,820
I do not want this dual selector.

52
00:04:01,900 --> 00:04:03,130
And again, click on this button.

53
00:04:04,920 --> 00:04:11,890
Plus pattern here is previous previous you button is used to modify the orientation of the model, which

54
00:04:11,890 --> 00:04:12,550
previous few.

55
00:04:13,780 --> 00:04:15,700
Let me click on this previous few button.

56
00:04:16,030 --> 00:04:19,810
You can see the model is reoriented to its previous.

57
00:04:21,160 --> 00:04:21,760
Next button.

58
00:04:21,770 --> 00:04:23,350
Here is this new button.

59
00:04:23,770 --> 00:04:29,590
This nuclear button is chosen to create a user defined view and save it in the midst of views in this

60
00:04:29,650 --> 00:04:36,490
orientation, down of the view that you create will be saved in this and the same views dropdown list.

61
00:04:37,180 --> 00:04:38,680
I'll click on this new mute button.

62
00:04:39,170 --> 00:04:40,550
First, I'll change the view of the.

63
00:04:42,520 --> 00:04:43,420
I want to save this.

64
00:04:44,020 --> 00:04:46,450
So I will click on this new button.

65
00:04:47,440 --> 00:04:57,500
And see the name few data boxes here and enter my view in the your name edit box and then I choose this

66
00:04:57,510 --> 00:04:57,890
October.

67
00:04:59,510 --> 00:05:06,260
And see, you created is now displayed under this same views, dropdown trombonists.

68
00:05:08,480 --> 00:05:15,130
You can save this view to SolidWorks at a base by choosing this save your dishonoured folks button.

69
00:05:15,890 --> 00:05:20,760
You can also delete this view or remove this field from document clicking on this.

70
00:05:20,940 --> 00:05:23,070
They move you from document like.

71
00:05:24,430 --> 00:05:32,630
Now, I'll change the view of the model, then I'll click on this, my view which we created and see

72
00:05:32,840 --> 00:05:35,270
the model is oriented to the view which received.

73
00:05:36,830 --> 00:05:41,130
So this is how we modified the view orientation's in solid.

74
00:05:42,470 --> 00:05:43,550
Thank you for watching this week.
