1
00:00:11,810 --> 00:00:16,210
Though welcome to the world of computer aided design with solid votes.

2
00:00:16,940 --> 00:00:21,260
Today we are going to create this solid model in front of you.

3
00:00:21,410 --> 00:00:24,540
Talk to you inside view of this model I'm given here.

4
00:00:26,000 --> 00:00:32,960
And all the dimensions that are required to create this model are provided in these views and seek to

5
00:00:32,960 --> 00:00:33,920
create this model.

6
00:00:34,520 --> 00:00:38,450
First of all, we need to create this base rectangular feature.

7
00:00:39,310 --> 00:00:44,950
And to create a spectacular feature, we need to create its sketch in the sketching environment.

8
00:00:45,730 --> 00:00:52,330
If we look in the front view, the length of this rectangle is 75 units and the vectors eight units.

9
00:00:54,010 --> 00:00:56,910
So first of all, we need to involve the sitting environment.

10
00:00:58,210 --> 00:01:00,060
Currently, we are in the sketch command manager.

11
00:01:00,310 --> 00:01:03,760
And here we have this sketch to look on the sketch to.

12
00:01:05,340 --> 00:01:08,170
And then choose this front plane as the sketching plane.

13
00:01:09,370 --> 00:01:11,740
Now click on this rectangle to.

14
00:01:18,780 --> 00:01:22,830
From the rectangles type area to this corner rectangle option.

15
00:01:23,490 --> 00:01:27,540
Look at the origin to specify the first point of the rectangle.

16
00:01:29,950 --> 00:01:33,780
Now click anywhere in the drawing area to create a rectangle.

17
00:01:36,240 --> 00:01:37,380
Creating the rectangle.

18
00:01:37,650 --> 00:01:39,630
Choose the smart dimension to.

19
00:01:42,020 --> 00:01:44,940
This line segment and plays the dimension here.

20
00:01:47,200 --> 00:01:51,080
Length value for the rectangle, it's 75 five, its size, type 75.

21
00:01:52,130 --> 00:01:54,190
The added box and Presenta.

22
00:01:56,650 --> 00:02:00,080
Again, select this land segment and face the damage and value.

23
00:02:01,560 --> 00:02:02,560
It's damaged in values.

24
00:02:02,610 --> 00:02:04,320
Eight units, type eight.

25
00:02:04,410 --> 00:02:05,230
And press enter.

26
00:02:06,030 --> 00:02:09,690
So we have created the sketch for the rectangular feature.

27
00:02:10,510 --> 00:02:12,510
Now click on this edit sketch button here.

28
00:02:13,170 --> 00:02:16,090
Get into the board modeling environment of SolidWorks.

29
00:02:17,490 --> 00:02:18,950
Rotate the sketch a bit.

30
00:02:20,270 --> 00:02:22,880
Now go to the features, come on, manager.

31
00:02:24,560 --> 00:02:26,820
Juice extruded boss based tool.

32
00:02:28,220 --> 00:02:32,510
Once you click on the stool, the boss extrude, property manager is involved.

33
00:02:33,600 --> 00:02:39,160
In the direction one rollout, we have this condition dropdown list.

34
00:02:40,800 --> 00:02:43,650
Choose the mid plane option from this dropdown list.

35
00:02:43,960 --> 00:02:48,570
If you see in the side view, the depth of the rectangular feature is 52 units.

36
00:02:49,140 --> 00:02:52,320
So at type 52 in this added box.

37
00:02:55,140 --> 00:03:01,140
I click on this okay button, so we have created this base feature of the modern.

38
00:03:03,950 --> 00:03:07,490
Next thing we need to do is we need to create this part of the model.

39
00:03:09,270 --> 00:03:16,790
If you see in the front view, the radius values for these semicircular abortions is 20 and twelve.

40
00:03:17,710 --> 00:03:28,220
So to create the spot, first of all, we'll create a plane which lies at the center of this face and.

41
00:03:32,590 --> 00:03:34,870
Currently, we are in the features command manager.

42
00:03:35,170 --> 00:03:37,710
And here we have this reference symmetry dropdown list.

43
00:03:38,580 --> 00:03:43,150
Click on it and then choose the plain tool from this dropdown list.

44
00:03:43,920 --> 00:03:45,930
The plane property manager is displayed.

45
00:03:47,660 --> 00:03:50,150
Now, select this face.

46
00:03:51,210 --> 00:03:52,440
And then select.

47
00:03:53,440 --> 00:03:56,540
This face off the base feature in C.

48
00:03:56,710 --> 00:03:58,330
A preview of the.

49
00:03:59,460 --> 00:04:01,160
Lane is created here.

50
00:04:02,280 --> 00:04:03,270
She was the OK button.

51
00:04:04,710 --> 00:04:13,520
So here we have this plane now, which is at Medoff, this face and this face lift, this plane Pop-Up

52
00:04:13,530 --> 00:04:14,460
Menus displayed.

53
00:04:15,560 --> 00:04:18,840
She was the sketch option from this Pop-Up menu.

54
00:04:20,300 --> 00:04:22,600
And see, now we are in the sketching environment.

55
00:04:23,260 --> 00:04:24,490
Now to orient the view.

56
00:04:25,420 --> 00:04:29,850
Mr. Spacebar on your keypad and then choose this.

57
00:04:31,150 --> 00:04:36,580
Normal two option from the orientation ballot box with the circle to.

58
00:04:38,480 --> 00:04:40,240
Great first circle.

59
00:04:41,910 --> 00:04:44,280
Just having a realist value of 20 units.

60
00:04:48,700 --> 00:04:50,270
To the smy dimension to.

61
00:04:51,430 --> 00:04:58,000
Sitting in the circle and place the damage as the radius values 20 units, so the diameter will be 40.

62
00:04:58,210 --> 00:04:59,860
So I'll type 40 and press into.

63
00:05:02,960 --> 00:05:05,710
She was the so-called to the stand, the religious values.

64
00:05:06,370 --> 00:05:08,820
So the diameter value will be 24 units.

65
00:05:12,270 --> 00:05:14,960
My dimensioned to select the inner circle.

66
00:05:17,620 --> 00:05:18,990
James, the damage to value.

67
00:05:19,290 --> 00:05:27,300
Twenty four units as the escape key to get out of the small damage and to rotate the model a bit by

68
00:05:27,330 --> 00:05:33,690
using the middle mouse button, actually by pressing and holding the middle mouse button on this quick

69
00:05:33,690 --> 00:05:38,460
snaps dropdown list and choose this Centrepoint snap option.

70
00:05:40,230 --> 00:05:43,740
Now, select this Centrepoint Outer Circle.

71
00:05:47,540 --> 00:05:52,660
It hold the control key and select center point of this edge.

72
00:05:53,780 --> 00:05:55,220
And see the properties.

73
00:05:55,640 --> 00:05:57,080
Property manager is invoked.

74
00:05:57,500 --> 00:06:00,920
Choose what to call option from this ad relations.

75
00:06:02,340 --> 00:06:03,250
Quando Gilberton.

76
00:06:04,400 --> 00:06:05,720
Again, press the spacebar.

77
00:06:06,860 --> 00:06:10,310
And choose the normal two button from this orientation dialog box.

78
00:06:11,150 --> 00:06:19,130
If you see the center of these circles is at a distance of 40 units from this edge of the base feature,

79
00:06:20,000 --> 00:06:21,530
click on this small damage and tune.

80
00:06:23,240 --> 00:06:24,270
The centerpoint.

81
00:06:26,160 --> 00:06:28,140
Then I would say like this, ich.

82
00:06:30,270 --> 00:06:31,290
Well, the base feature.

83
00:06:33,060 --> 00:06:36,860
And and play the dimension and change it to 40 units.

84
00:06:37,970 --> 00:06:40,820
Is the escape key to get out of the spy dimension tune?

85
00:06:41,830 --> 00:06:48,380
Next thing we need to do is we need to create this puppet can see where this part is.

86
00:06:48,520 --> 00:06:49,390
Ten units.

87
00:06:51,630 --> 00:06:59,470
Create this spot, Mustoe fall and create what they call center lane for these circles.

88
00:07:00,780 --> 00:07:04,890
She was the fourth construction option from the options rollout.

89
00:07:07,730 --> 00:07:09,980
Create a vertical scintillate.

90
00:07:12,670 --> 00:07:15,260
Right, click in the drawing area and choose the select option.

91
00:07:16,200 --> 00:07:23,780
Again, to the line to to the Fort construction site check box and then create a horizontal center line

92
00:07:23,780 --> 00:07:23,980
here.

93
00:07:26,110 --> 00:07:32,800
Select this top edge of the base feature and then choose this colored entities, too, so that we have

94
00:07:32,800 --> 00:07:36,700
a line segment created here at the top edge of the base feature.

95
00:07:38,040 --> 00:07:43,380
Nine walk the line to take on the significance of this circle and.

96
00:07:44,290 --> 00:07:45,940
Yet a line segment like this.

97
00:07:48,360 --> 00:07:49,830
She was the smart damage to.

98
00:07:52,260 --> 00:08:00,310
Like the center line and this line segment changed the dimension value to five units.

99
00:08:01,770 --> 00:08:05,840
Now click on the trim entity's tool and trim this unwanted fat.

100
00:08:10,320 --> 00:08:14,740
So we have crimped the unwanted bought on this side of the motor.

101
00:08:15,960 --> 00:08:19,730
Look on the mirror entities, two entities, two mirror.

102
00:08:21,050 --> 00:08:26,230
This box select this line segment in the middle at about ListBox.

103
00:08:27,360 --> 00:08:28,350
Selecta, scintillate.

104
00:08:30,420 --> 00:08:31,510
Then hit the button.

105
00:08:33,450 --> 00:08:38,560
Again, to the stream entities tool and trimmed, unwanted, but trim.

106
00:08:38,970 --> 00:08:40,210
Property manager is active.

107
00:08:40,560 --> 00:08:44,130
So well trimmed, unwanted, but on the upside of the schedules.

108
00:08:46,230 --> 00:08:47,260
This plot also.

109
00:08:51,280 --> 00:08:55,520
Now, again, choose the length tune and close the sketch here.

110
00:09:00,490 --> 00:09:03,550
Creating the sketch they conducted sketch to.

111
00:09:05,900 --> 00:09:07,200
We'll take the model a bit.

112
00:09:07,740 --> 00:09:10,230
Choose this extruded boss base to.

113
00:09:12,320 --> 00:09:16,140
The condition dropdown list choose the mid plane option.

114
00:09:16,870 --> 00:09:21,430
Seen the top two extrusion values, 40 units.

115
00:09:24,970 --> 00:09:26,560
I put in this box.

116
00:09:32,430 --> 00:09:35,210
On the whole Kim button to get out of the extruded Busby's.

117
00:09:36,990 --> 00:09:46,330
We have created the base feature and this part of the model where we need to create these two rib features.

118
00:09:47,810 --> 00:09:58,380
Left the plane, which we created earlier, and used a sketch button from this menu, but you got into

119
00:09:58,380 --> 00:09:59,270
the sketching environment.

120
00:10:00,260 --> 00:10:05,910
That's the space spa when you keep that disorientation down on books.

121
00:10:06,280 --> 00:10:08,480
Then choose this normal to lighten.

122
00:10:12,410 --> 00:10:13,750
Edge of the base feature.

123
00:10:15,620 --> 00:10:17,600
And then to the convert entities to.

124
00:10:19,450 --> 00:10:21,130
Malali selectees.

125
00:10:22,340 --> 00:10:26,470
After out of the second feature and choose the Kenwood entities to.

126
00:10:27,740 --> 00:10:29,210
Now to the line to

127
00:10:32,230 --> 00:10:33,680
the first point of the line.

128
00:10:34,740 --> 00:10:41,890
Yes, specified the second point, likewise, click here and then Putin won't take a line segment like

129
00:10:41,890 --> 00:10:47,470
this, trim entities to remove the unwanted part of the sketch.

130
00:10:51,860 --> 00:10:54,070
Does escape key to get out of the TRIMM to.

131
00:10:56,670 --> 00:11:02,480
We actually tend to sketch on one side of the and then the ingredient to sketch normal to the screen.

132
00:11:04,280 --> 00:11:07,460
I mean, create a center line like this.

133
00:11:11,620 --> 00:11:12,530
A sketch.

134
00:11:13,060 --> 00:11:14,490
Choose the meter entities to.

135
00:11:16,250 --> 00:11:21,860
Now, look in the mirror at about Redox here and then choose this center like.

136
00:11:23,000 --> 00:11:25,760
Look on the okay button to get out of the mystery into these two.

137
00:11:26,630 --> 00:11:35,030
We have created a sketch footboard the features delete these lines in selecting it and then seeing the

138
00:11:35,040 --> 00:11:39,290
delete key on my keypad at the exit skips button.

139
00:11:39,590 --> 00:11:47,200
Here you choose to extruded box based to next choose to mid plane option from this in condition dropped

140
00:11:47,200 --> 00:11:51,740
on this C thickness of these features.

141
00:11:51,910 --> 00:11:53,110
It's eight units.

142
00:11:53,960 --> 00:11:54,470
So.

143
00:11:56,110 --> 00:11:58,910
Eight in this edit box office and.

144
00:12:01,080 --> 00:12:03,680
Okay, button and see.

145
00:12:04,150 --> 00:12:05,520
We have created this model.

146
00:12:10,310 --> 00:12:11,530
Thank you for watching this week.
