1
00:00:10,770 --> 00:00:14,730
Hello, welcome to the world of computer aided design with SolidWorks.

2
00:00:15,390 --> 00:00:22,520
Today, we are going to learn how to add thickness or how to extrude creative sketches in SolidWorks

3
00:00:23,010 --> 00:00:24,180
and see on the screen.

4
00:00:24,750 --> 00:00:27,940
Currently, I'm in the sketching environment of solitudes.

5
00:00:28,410 --> 00:00:29,730
I created the sketch.

6
00:00:30,160 --> 00:00:34,050
The next thing I want to do is I want to add thickness to this sketch.

7
00:00:34,740 --> 00:00:38,860
So first of all, we need to accept the sketching environment.

8
00:00:39,720 --> 00:00:40,350
So in the sketch.

9
00:00:40,350 --> 00:00:42,780
Come on, manager at the extreme left corner.

10
00:00:42,870 --> 00:00:45,470
We have this excerpt sketch button here.

11
00:00:46,140 --> 00:00:46,680
Click on it.

12
00:00:47,420 --> 00:00:50,520
You can see we are out of the sketching environment.

13
00:00:50,970 --> 00:00:57,540
Also created one base feature, one open profile that will help us in understanding the extra two in

14
00:00:57,540 --> 00:00:58,530
a much better way.

15
00:00:59,280 --> 00:01:03,150
Now, after getting out of the sketching environment, go to the features.

16
00:01:03,360 --> 00:01:10,500
Come on, manager really first tool in this command manager is extruded boss paste to look on it as

17
00:01:10,500 --> 00:01:12,360
you click on it to extrude.

18
00:01:12,600 --> 00:01:18,660
Property manager is involved and we are prompted to select a plate, a plan, a face or an edge on which

19
00:01:18,660 --> 00:01:20,820
to sketch for the feature cross section.

20
00:01:21,570 --> 00:01:24,660
The second thing, an existing sketch to use for the feature.

21
00:01:24,990 --> 00:01:26,690
So we have an existing sketch here.

22
00:01:27,550 --> 00:01:29,790
I'll select Bottom Line segment of the sketch.

23
00:01:30,090 --> 00:01:34,830
You can see a preview of the thickness that is added to this outer rectangles displayed.

24
00:01:35,430 --> 00:01:38,640
What we need to do is we need to add this circle to the sketch.

25
00:01:39,480 --> 00:01:47,700
So here in the selected Cantus area, I'm like this ListBox and then I will select this so that the

26
00:01:47,700 --> 00:01:49,980
boss extrude property manager.

27
00:01:50,190 --> 00:01:51,490
We have this from roll out.

28
00:01:51,900 --> 00:01:54,510
This dropdown list contains different options.

29
00:01:54,990 --> 00:01:57,160
Currently, the sketch plate option is chosen.

30
00:01:57,720 --> 00:02:01,830
So the thickness is added right from the plain on Mr. Sketches created.

31
00:02:02,040 --> 00:02:06,030
If you choose this suffix face plain option, select a suffix face.

32
00:02:06,030 --> 00:02:08,160
Plain added box is activated.

33
00:02:09,340 --> 00:02:16,660
So I would select this surface of the existing model here, not the exclusion has started from this

34
00:02:16,660 --> 00:02:17,650
phase of the model.

35
00:02:18,010 --> 00:02:20,980
Third option is Vertex select this option.

36
00:02:21,820 --> 00:02:24,760
And I want that extrusion up to this vertex.

37
00:02:25,620 --> 00:02:27,040
So I'll click on this vertex.

38
00:02:27,340 --> 00:02:31,100
Now I want to extrusion to start from this vertex point.

39
00:02:31,510 --> 00:02:33,190
So I'll click on this vertex.

40
00:02:33,310 --> 00:02:39,970
You can see the model has shifted in alignment to this, but X last option, this dropdown list is offset

41
00:02:40,000 --> 00:02:40,330
option.

42
00:02:41,330 --> 00:02:44,390
They call it can see the offset added boxes here.

43
00:02:45,740 --> 00:02:50,190
And entero value, let's say, 50 units fits into.

44
00:02:51,970 --> 00:03:00,040
From sketching plane extruded feature has shifted by a value of 50 units, also use this reverse direction

45
00:03:00,040 --> 00:03:00,490
button.

46
00:03:00,760 --> 00:03:06,880
If you want the extrusion to be on the other side like this now in the direction von rollout, we have

47
00:03:06,880 --> 00:03:09,430
this and condition dropdown list.

48
00:03:10,610 --> 00:03:12,260
Currently, the blind option is chosen.

49
00:03:13,140 --> 00:03:17,870
What I'll do is I'll select this sketch plain option from this start condition dropped on this.

50
00:03:18,160 --> 00:03:19,320
Now in the direction of under aloud.

51
00:03:20,210 --> 00:03:22,820
We have these different options in this dropdown list.

52
00:03:23,240 --> 00:03:32,660
So I selected two on option in C sketches, extruded back phase of this solid model as we have selected

53
00:03:32,930 --> 00:03:34,920
through our option from this dropdown list.

54
00:03:36,410 --> 00:03:37,190
Up to next.

55
00:03:37,670 --> 00:03:43,160
So the next entity that comes in the way of this extrusion is this face of the model.

56
00:03:43,730 --> 00:03:49,210
So the sketches extruded up to this face of the moon, up the vortex.

57
00:03:50,070 --> 00:03:54,000
I want this sketch to be extruded up to this vertex point.

58
00:03:54,130 --> 00:03:54,820
I'll select this.

59
00:03:54,830 --> 00:03:56,180
What expert can see.

60
00:03:56,510 --> 00:04:03,210
The sketch has gone up to this face because we selected this one takes off the existing model up to

61
00:04:03,210 --> 00:04:03,980
surface.

62
00:04:04,100 --> 00:04:06,440
Now, I want thickness to be added to the sketch.

63
00:04:06,650 --> 00:04:07,700
Up to this face.

64
00:04:08,750 --> 00:04:16,580
Select this face and see the sketches extruded up to this face of the existing model offset from surface

65
00:04:17,030 --> 00:04:21,230
sulfates currently selected is this face of the existing model.

66
00:04:22,210 --> 00:04:27,480
And click on this edit box and I choose this stuff is the offset value is 81.

67
00:04:27,990 --> 00:04:30,270
I'll change it to 20 units.

68
00:04:32,740 --> 00:04:37,990
So from this face, this offset distance value is tied to units.

69
00:04:39,200 --> 00:04:44,720
Up to party with this up to body option selected in this dropdown list, we need to select the body

70
00:04:44,930 --> 00:04:46,390
up to which we want to extrusion.

71
00:04:46,550 --> 00:04:52,160
So let's select this body and you can see the results, the sketches extruded up to this body.

72
00:04:53,290 --> 00:05:00,180
With plane using this option, we can extrude the sketch along both the directions, which will be equally

73
00:05:00,180 --> 00:05:05,960
extruded in either direction and see the depth values to units currently.

74
00:05:06,210 --> 00:05:08,280
Change it to 60 units.

75
00:05:08,580 --> 00:05:13,970
So from this mid plane, the sketches extruded 60 units in this direction and 60 units in this direction.

76
00:05:14,700 --> 00:05:17,950
We can also specify the troughed angle to the exclusion.

77
00:05:18,380 --> 00:05:20,970
So click on the start button and you click on it.

78
00:05:21,300 --> 00:05:24,000
The troughed angle edit box becomes active.

79
00:05:24,240 --> 00:05:28,530
Now you can enter the value, the drafting, the value that you say.

80
00:05:28,560 --> 00:05:30,660
I want a draft angle of 10 degrees.

81
00:05:30,950 --> 00:05:31,660
So I'll type 10.

82
00:05:31,860 --> 00:05:34,080
And press enter and see.

83
00:05:34,350 --> 00:05:38,250
Draft angle of 10 degrees is added to this extrusion by pressing enter.

84
00:05:38,340 --> 00:05:39,600
I got out of the two.

85
00:05:40,200 --> 00:05:42,250
I need to get back to that property manager.

86
00:05:42,360 --> 00:05:48,720
So what I do is select this boss extrude feature and then I would choose the edit feature option from

87
00:05:48,720 --> 00:05:51,290
this loud display in C.

88
00:05:51,550 --> 00:05:54,830
There's a draft angle of 10 degrees light to this model.

89
00:05:55,540 --> 00:05:59,520
You can also select this draft outward checkbox.

90
00:06:00,620 --> 00:06:03,160
The election of draft to be released earlier.

91
00:06:03,290 --> 00:06:08,930
It wasn't in one direction, not the draft as and the outward dedication after getting the draft.

92
00:06:08,970 --> 00:06:11,610
I'll choose this OK button and see.

93
00:06:11,720 --> 00:06:16,040
I also created an open kitchen and I want to extrude this open sketch.

94
00:06:16,280 --> 00:06:18,730
Go to the extra boss space feature to me.

95
00:06:18,980 --> 00:06:21,770
I will select this existing open sketch.

96
00:06:22,060 --> 00:06:23,950
See, we have control ups here.

97
00:06:24,410 --> 00:06:27,570
Earlier we only extruded the sketch in Direxion Box.

98
00:06:27,800 --> 00:06:32,750
You can also add thickness to the model by using this direction to roll out.

99
00:06:33,530 --> 00:06:35,120
So select the checkbox.

100
00:06:35,450 --> 00:06:39,650
And we have the same dropdown list, which was indirection one rule out here.

101
00:06:40,200 --> 00:06:42,430
So this can be added in other direction.

102
00:06:42,530 --> 00:06:48,200
Also now, on selecting this open sketch, you can see a preview of the extruded feature is displayed

103
00:06:49,280 --> 00:06:50,900
because here embossed extrude.

104
00:06:51,410 --> 00:06:57,530
Property manager can feature checkboxes selected the dropdown list made plain option is selected.

105
00:06:57,980 --> 00:07:02,000
So the thickness is added on either side of the sketch.

106
00:07:02,360 --> 00:07:08,300
If I choose this one direction option from this dropdown list, you can see the preview has changed.

107
00:07:08,750 --> 00:07:13,420
It may change the view orientation so that views are clear to us.

108
00:07:14,270 --> 00:07:18,020
You can see in the One Direction option is chosen from this dropdown list.

109
00:07:18,910 --> 00:07:21,950
Thickness is edit only in this direction.

110
00:07:22,860 --> 00:07:29,560
If I choose this mid plane option, I can see the thickness is divided on either side of this sketch.

111
00:07:30,130 --> 00:07:38,260
If I choose the two direction option in C, we have to edit what is available now, plus direction,

112
00:07:38,260 --> 00:07:39,340
which is this direction.

113
00:07:39,610 --> 00:07:45,490
Take this value is 20 units and in the other direction the thickness value is 10 units.

114
00:07:45,660 --> 00:07:50,110
I'll change the other direction value to the center.

115
00:07:51,370 --> 00:07:53,610
Now to thicknesses edit in this directionals.

116
00:07:54,690 --> 00:08:00,280
In this autofill at conures checkbooks to apply Philipot at the corners automatically.

117
00:08:01,890 --> 00:08:08,170
The Phillip value will be five minutes after getting all the barometer's in this box extrude.

118
00:08:08,440 --> 00:08:11,230
Property manager click on this OK button.

119
00:08:12,460 --> 00:08:13,360
See the final model.

120
00:08:14,290 --> 00:08:21,430
So this is how we add thickness to the sketches by using the extruded box based feature to Inside the

121
00:08:21,480 --> 00:08:21,910
box.

122
00:08:22,180 --> 00:08:23,050
Thank you for watching this.
