1
00:00:10,940 --> 00:00:14,150
Hello, welcome to the world of computer aided design with solid.

2
00:00:14,450 --> 00:00:20,610
In today's session, we are going to learn how to create remote features and solid votes to create remote

3
00:00:20,630 --> 00:00:21,170
features.

4
00:00:21,380 --> 00:00:25,660
We have this report was placed feature two available in the features.

5
00:00:25,670 --> 00:00:26,450
Come on, manager.

6
00:00:26,630 --> 00:00:29,090
First of all, we need to have a sketch on.

7
00:00:29,090 --> 00:00:35,300
In other words, we can see we need to have a cross-section of the revised model that can be used to

8
00:00:35,300 --> 00:00:37,610
create a revolt feature or do the sketch.

9
00:00:37,640 --> 00:00:40,610
Come on, manager, and choose this button here.

10
00:00:41,580 --> 00:00:41,890
Explain.

11
00:00:42,020 --> 00:00:48,210
We need to do is we need to select the play on which we want to create the sketch and choose this front

12
00:00:48,210 --> 00:00:48,420
plate.

13
00:00:48,650 --> 00:00:51,890
Now we are in the sketching and laminate retrieval features.

14
00:00:51,920 --> 00:00:56,300
We need to have a central axis about which we want to reveal the cross section.

15
00:00:56,540 --> 00:01:02,630
So first of all, I will create a central axis by using the line to use this one construction checkbox

16
00:01:02,630 --> 00:01:02,850
here.

17
00:01:03,220 --> 00:01:04,460
Create a center line here.

18
00:01:04,860 --> 00:01:05,000
Right.

19
00:01:05,000 --> 00:01:05,990
Click in the drawing area.

20
00:01:06,020 --> 00:01:08,180
Choose the select option to get out of the line.

21
00:01:09,050 --> 00:01:14,240
Now, let's say I want to create a cylinder which is having a hole at its center.

22
00:01:14,510 --> 00:01:18,650
So I would choose the rectangle to choose this corner rectangle option.

23
00:01:19,130 --> 00:01:21,650
And I will create a cross section here like this.

24
00:01:22,220 --> 00:01:23,180
This is the center line.

25
00:01:23,210 --> 00:01:24,470
And this is the cross section.

26
00:01:24,770 --> 00:01:30,470
Distance between the center line and this edge will be taken as the radius of the hole.

27
00:01:30,710 --> 00:01:35,340
So after creating the rectangle, click on this close dialog, button it out of the rectangle.

28
00:01:35,870 --> 00:01:38,170
Now we have a cross section and a center line here.

29
00:01:38,820 --> 00:01:42,890
And click on this exit sketch button to exit the sketching environment.

30
00:01:43,270 --> 00:01:46,850
I'll go to the features, the mine manager and choose this.

31
00:01:47,060 --> 00:01:48,870
We want cost base, too.

32
00:01:49,730 --> 00:01:52,880
Once you click on this to that, you want property managers and mode.

33
00:01:53,260 --> 00:01:55,850
Now we need to select the sketch that we want to Devall.

34
00:01:57,410 --> 00:02:01,710
And see automatically a preview of one feature is displayed here.

35
00:02:02,350 --> 00:02:06,540
The axis of revolution is Langlands guess to which is the center line.

36
00:02:07,130 --> 00:02:08,290
The direction one rollout.

37
00:02:08,570 --> 00:02:16,090
We have this dropdown list, which has two options, similar to ones which we sign extruding plus base

38
00:02:16,180 --> 00:02:16,540
two.

39
00:02:16,670 --> 00:02:19,640
You can also change the angle of rotation using this edit box.

40
00:02:20,390 --> 00:02:24,320
You do not want the section to do all a complete 360 degree angle.

41
00:02:24,470 --> 00:02:25,550
You can change it from here.

42
00:02:25,940 --> 00:02:28,900
Suppose I change this value to 300 degrees.

43
00:02:28,990 --> 00:02:33,110
The center can see the sketch has made at evolution of 300 degrees.

44
00:02:33,710 --> 00:02:37,400
Activate distraction to roll out by clicking on this checkbox.

45
00:02:37,640 --> 00:02:40,880
Now suppose I want to complete the rotation 360 degrees.

46
00:02:41,030 --> 00:02:48,140
So indirection one we specify angle is three hundred degrees in the action to specify the angle at 60

47
00:02:48,140 --> 00:02:50,410
degrees and press enter.

48
00:02:50,860 --> 00:02:57,180
So the remaining 60 degrees were completed by adding the angle value in this direction to roll out.

49
00:02:57,470 --> 00:03:03,250
We can also do all the time features open sketches using this feature roll out.

50
00:03:03,510 --> 00:03:11,180
The options in feature allowed a very much similar to the ones that we saw extruded was based to check

51
00:03:11,180 --> 00:03:16,490
this thin feature checkbox after adding all the pad meters to the reward.

52
00:03:16,520 --> 00:03:19,370
Property manager click on the OK button.

53
00:03:19,730 --> 00:03:21,500
And here we have the reward feature.

54
00:03:21,740 --> 00:03:23,050
Thank you for watching this video.
