1
00:00:11,830 --> 00:00:12,020
Hello.

2
00:00:13,000 --> 00:00:16,500
Welcome to the world of computer aided design with SolidWorks.

3
00:00:17,740 --> 00:00:25,810
Today, we are going to create this model sketch to create this model is giving here and all the dimensions

4
00:00:25,810 --> 00:00:28,760
that are required to create this sketch are also provided here.

5
00:00:30,620 --> 00:00:31,540
Create this model.

6
00:00:32,040 --> 00:00:38,960
First of all, we need to create the base feature and the sketch for the base feature is this circle,

7
00:00:39,230 --> 00:00:41,630
which is having a 3-D value of 50 units.

8
00:00:43,620 --> 00:00:49,040
So they you think this more of the sketch, come on, manager.

9
00:00:49,520 --> 00:00:52,080
We are already in the sketching environment of sorted woods.

10
00:00:52,490 --> 00:00:54,140
So click on this so-called.

11
00:00:56,110 --> 00:00:57,220
There's the centerpoint.

12
00:00:59,360 --> 00:01:00,610
It is values 50.

13
00:01:04,270 --> 00:01:05,470
So click here.

14
00:01:06,360 --> 00:01:09,610
Andreadis value of 50 is displayed along with the cost.

15
00:01:10,450 --> 00:01:13,940
Now we need to create this portion of the sketch.

16
00:01:15,580 --> 00:01:21,400
Diameter for the NASA is 10 units and radius for the outer rock is.

17
00:01:23,300 --> 00:01:24,500
I mean, 10 units.

18
00:01:26,850 --> 00:01:28,330
So click on the circle to.

19
00:01:30,600 --> 00:01:33,320
So, like this quadrant has the center point for the circle.

20
00:01:37,600 --> 00:01:41,110
As the diameter for the circle is 10, so radius will be five.

21
00:01:43,400 --> 00:01:49,190
Now we have to create a circle again at the same center radius value of 10 units.

22
00:01:50,790 --> 00:02:00,440
She was no Caperton now trim the unwanted fact she was the trim entities to and trim despond, this

23
00:02:00,790 --> 00:02:03,220
font disbarred and disbarred.

24
00:02:04,460 --> 00:02:10,290
Now we have to circle this up, located on the circumference of the center.

25
00:02:11,150 --> 00:02:13,240
And number of items are six.

26
00:02:13,760 --> 00:02:16,600
Get out of the trim tool by clicking on this closed item button.

27
00:02:18,520 --> 00:02:22,990
Go to the Selenia sketchpad and drop down and choose circular sketch pattern to.

28
00:02:24,400 --> 00:02:25,620
Entities to factor in.

29
00:02:26,800 --> 00:02:30,400
Now click on the entities to pattern added box and select the circle.

30
00:02:30,640 --> 00:02:31,540
And this outright.

31
00:02:33,890 --> 00:02:41,720
In the number of instances in books and value add six press enter.

32
00:02:43,240 --> 00:02:43,800
Spacing.

33
00:02:44,090 --> 00:02:45,410
Check boxes selected.

34
00:02:46,370 --> 00:02:53,000
So the instances are placed at equal missing value and on the circum friends of the sub.

35
00:02:54,020 --> 00:02:55,070
So click on this.

36
00:02:55,190 --> 00:02:55,940
Okay, but enough.

37
00:03:00,370 --> 00:03:01,370
Let's shift this sketch.

38
00:03:03,330 --> 00:03:04,360
A bit to the left.

39
00:03:09,110 --> 00:03:11,150
Now we have to trim this unwanted fat.

40
00:03:12,560 --> 00:03:19,040
So choose the trim entities to and and this pot to spot the spot.

41
00:03:22,600 --> 00:03:24,870
But this fight and this fight.

42
00:03:38,870 --> 00:03:40,670
Similarly trimmed, unwanted, but.

43
00:03:43,180 --> 00:03:44,430
The site of the sketch.

44
00:03:55,090 --> 00:03:58,300
So we are done creating with this outer part of the sketch.

45
00:03:58,840 --> 00:04:08,410
Now we need to create these three slots in C Central Circle along with these slots run having a diameter

46
00:04:08,410 --> 00:04:12,460
value of seventy units so I can go to the circle, too.

47
00:04:13,650 --> 00:04:19,090
And this time I'll create a circle the radius value of 35 units.

48
00:04:26,840 --> 00:04:31,630
Selects for construction, shake box and head document.

49
00:04:33,210 --> 00:04:34,690
That is first create this flood.

50
00:04:36,270 --> 00:04:37,090
Create this slot.

51
00:04:37,300 --> 00:04:43,150
We need to create these two reference lights, flash reference line is at an angle of 30 degrees with

52
00:04:43,150 --> 00:04:49,480
respect to the horizontal and the second reference line, it's at an angle value of 45 degrees with

53
00:04:49,480 --> 00:04:50,950
respect to the phosphorescence.

54
00:04:53,970 --> 00:04:59,850
After creating these two defense lines, we will get two points of intersection, first one between

55
00:04:59,850 --> 00:05:02,820
this reference line and the circle.

56
00:05:03,300 --> 00:05:06,280
And second one between this reference line and this set.

57
00:05:06,890 --> 00:05:11,780
And these intersection points will act as the start and end points of the slope.

58
00:05:13,300 --> 00:05:16,490
So let us walk the line to what's to fall.

59
00:05:16,600 --> 00:05:18,400
I'll create a horizontal line.

60
00:05:20,230 --> 00:05:24,280
Arcing through the quadrant and centrepoint of the circles.

61
00:05:27,810 --> 00:05:35,900
Select this line and convert it into a construction line by selecting for construction checkbox again

62
00:05:35,900 --> 00:05:36,890
in the line two.

63
00:05:38,300 --> 00:05:39,350
This is the first point.

64
00:05:42,180 --> 00:05:46,910
And the second point will lie on the southern France of this dotted circle.

65
00:05:48,780 --> 00:05:52,150
The able went online tools for the second reference line.

66
00:05:55,790 --> 00:06:04,160
So we have created these two reference lanes, so like the center line created earlier and fix its location

67
00:06:04,400 --> 00:06:06,200
by clicking on this fix option.

68
00:06:07,530 --> 00:06:08,610
And then to document.

69
00:06:10,740 --> 00:06:14,840
And what a smart, dimensioned tool and select this line.

70
00:06:15,020 --> 00:06:16,100
And then the center line.

71
00:06:17,610 --> 00:06:18,970
Plays that angle value.

72
00:06:22,470 --> 00:06:26,830
This angle value is 30 degrees, change disvalue to 31.

73
00:06:29,560 --> 00:06:33,580
Now, again, select this line segment and the center line.

74
00:06:36,040 --> 00:06:37,180
In place, the damage already.

75
00:06:38,110 --> 00:06:40,330
This time the angle value will be 45 plus 30.

76
00:06:40,380 --> 00:06:41,430
Seventy five degrees.

77
00:06:45,970 --> 00:06:51,450
Now select these two line segments by pressing and holding the control keys on your keyboard.

78
00:06:51,930 --> 00:06:52,470
And then.

79
00:06:53,670 --> 00:06:56,530
She this for Construction Checkbook's.

80
00:07:00,700 --> 00:07:04,540
Now we have the Centrepoint start point and end point of the slide.

81
00:07:04,950 --> 00:07:09,490
Choose this Centrepoint out slot to.

82
00:07:12,020 --> 00:07:13,190
This is the center point.

83
00:07:13,880 --> 00:07:15,170
This is the start point.

84
00:07:15,320 --> 00:07:15,740
And.

85
00:07:16,840 --> 00:07:19,310
This one is the end point for the start.

86
00:07:22,150 --> 00:07:25,280
You can see the verdict of the slaughters, 10 units.

87
00:07:27,150 --> 00:07:30,650
As the values are displayed here in Meeta, so this rally is fine.

88
00:07:31,150 --> 00:07:38,960
So we created the first slot after creating the slot as the escape key to get out of the slot to.

89
00:07:41,830 --> 00:07:47,660
I can see in the sketch we need to create two more slots like this and on the sitcom Friends of This

90
00:07:47,660 --> 00:07:48,170
Inner Circle.

91
00:07:49,180 --> 00:07:52,370
So choose the Sirtris sketch pattern two from this dropped out.

92
00:07:54,110 --> 00:07:56,300
And click on the entities to pardon.

93
00:07:57,980 --> 00:08:00,130
Let's folks link this slot.

94
00:08:02,800 --> 00:08:06,460
And in the number of instances, it blocks have changed the value to three.

95
00:08:08,710 --> 00:08:09,800
Then I choose this.

96
00:08:09,880 --> 00:08:10,050
OK.

97
00:08:15,100 --> 00:08:17,110
So we are done with creating the sketch.

98
00:08:17,640 --> 00:08:21,810
Now click on this excerpt sketch tool to get into the part modeling and.

99
00:08:23,500 --> 00:08:28,930
Good features, come on, manager, and choose this extruded boss face to.

100
00:08:30,590 --> 00:08:37,370
The value required extrusion is 20 of the type 20 and hit the Okimoto.

101
00:08:46,070 --> 00:08:48,900
In this way, we have created the solid modern.

102
00:08:51,410 --> 00:08:55,190
You'll rotate it and view it at the desired orientation.

103
00:08:58,980 --> 00:09:00,210
Thank you for watching this video.
