1
00:00:14,470 --> 00:00:17,770
Welcome to the world of computer aided design with SolidWorks.

2
00:00:18,930 --> 00:00:24,670
Rick, you are going to create this model in front of you and dot two of the model.

3
00:00:24,810 --> 00:00:31,740
I'm giving you all the dimensions that are required to create this model available in these beautiful.

4
00:00:33,490 --> 00:00:37,110
Image file is available in the resource section for Don.

5
00:00:39,170 --> 00:00:40,730
Let's start creating this model.

6
00:00:42,330 --> 00:00:45,050
What the file menu and then choose this new option.

7
00:00:46,820 --> 00:00:49,150
SolidWorks documented, Chatterbox's displayed.

8
00:00:50,470 --> 00:00:54,460
It sure this Port Dabb is chosen here and then take on the occupant.

9
00:00:56,550 --> 00:00:58,910
We are in the modeling environment of solid.

10
00:00:59,920 --> 00:01:06,420
Now we need to create the base feature the base feature, we need to create its sketch.

11
00:01:07,040 --> 00:01:09,620
So from the sketch, come on, manager.

12
00:01:10,110 --> 00:01:11,640
Choose this sketch to.

13
00:01:12,590 --> 00:01:13,660
Look differently.

14
00:01:14,630 --> 00:01:15,550
Select differently.

15
00:01:15,660 --> 00:01:16,600
That's a sketching plan.

16
00:01:17,820 --> 00:01:21,840
Choose this corner rectangle to create a rectangle.

17
00:01:22,380 --> 00:01:28,260
This okay button, which is the spot dimension to this lower edge of the rectangle.

18
00:01:28,520 --> 00:01:29,550
That is the dimension.

19
00:01:30,030 --> 00:01:31,020
And change it to.

20
00:01:32,210 --> 00:01:33,260
300 units.

21
00:01:36,500 --> 00:01:41,810
This edge of the rectangle is the dimension and change it to twenty five units.

22
00:01:44,490 --> 00:01:45,570
The second to.

23
00:01:55,660 --> 00:02:00,370
So you introduce value to the units and does it create?

24
00:02:02,210 --> 00:02:03,680
Circle with the same center.

25
00:02:10,890 --> 00:02:13,050
Radius valued to 100 Fabians.

26
00:02:15,570 --> 00:02:16,350
On the ocular.

27
00:02:18,630 --> 00:02:21,810
Was the smart dimensioned to select this?

28
00:02:23,690 --> 00:02:27,140
What is of the rectangle and intellect, the center point of the circle?

29
00:02:28,320 --> 00:02:31,260
The damage in and changed is valued at thirty nine units.

30
00:02:34,100 --> 00:02:39,920
Make sure the centerpoint of the circles is in alignment with the center point of this.

31
00:02:41,020 --> 00:02:42,180
Lord of the recording.

32
00:02:44,260 --> 00:02:49,350
I know the trim entity's tool and trim unwonted, but like this.

33
00:03:01,620 --> 00:03:05,080
Driving then wanted but luck on the Edzard sketchpad.

34
00:03:07,380 --> 00:03:08,650
Did this gets a bit.

35
00:03:10,080 --> 00:03:13,720
The features command manager, she was this excellent boss.

36
00:03:13,810 --> 00:03:14,280
Best to.

37
00:03:15,550 --> 00:03:18,760
This end condition dropdown list choose the military option.

38
00:03:21,110 --> 00:03:24,560
The death added box type 150 into.

39
00:03:25,650 --> 00:03:26,460
Lincoln, Documentum.

40
00:03:27,900 --> 00:03:29,280
We have created the best feature.

41
00:03:30,940 --> 00:03:32,840
Now we need to create the cottage.

42
00:03:34,640 --> 00:03:38,750
Look at this reference to Mitry drop down Konda name to.

43
00:03:40,500 --> 00:03:42,640
Like this covered face as the first reference.

44
00:03:43,910 --> 00:03:46,520
Second difference, so this.

45
00:03:47,510 --> 00:03:48,290
On that point.

46
00:03:49,640 --> 00:03:50,720
The good fleece.

47
00:03:51,850 --> 00:03:54,400
It's on the chromatin created a plane.

48
00:03:55,900 --> 00:03:59,630
Select this plane and then choose this sketch button from the public menu.

49
00:04:01,530 --> 00:04:04,130
Space on your back and then choose just normal to.

50
00:04:06,260 --> 00:04:07,400
Choose the circled tool.

51
00:04:08,270 --> 00:04:13,520
SNAP to this point of the edge and drag the goal set in horizontal direction.

52
00:04:15,680 --> 00:04:19,960
The key for the centrepoint on the circle and change the radius value.

53
00:04:20,660 --> 00:04:23,960
Seventy five units into.

54
00:04:25,810 --> 00:04:29,950
Like on the spot damage and to this point and select this point.

55
00:04:31,390 --> 00:04:33,880
So you decided to 150 units send.

56
00:04:39,460 --> 00:04:45,660
Any move to circle, to snap to this midpoint of the edge and create a circle like this?

57
00:04:47,120 --> 00:04:48,200
The greatest value.

58
00:04:48,410 --> 00:04:49,430
Twenty five minutes.

59
00:04:51,310 --> 00:04:56,530
Yet another circle is in what is until alignment that this is Centrepoint.

60
00:05:00,790 --> 00:05:01,910
Mean that he just ran.

61
00:05:02,040 --> 00:05:03,010
Twenty five minutes.

62
00:05:04,770 --> 00:05:06,280
To the slight dimension to.

63
00:05:08,790 --> 00:05:12,170
The center point of the circle and this age.

64
00:05:15,320 --> 00:05:16,530
If the damage in value.

65
00:05:17,810 --> 00:05:19,520
Change it to twenty five minutes.

66
00:05:23,960 --> 00:05:27,760
The center and this age, the value of 225 becomes.

67
00:05:30,130 --> 00:05:32,680
Now linked to yet.

68
00:05:33,610 --> 00:05:34,870
Lines like this.

69
00:05:46,880 --> 00:05:48,200
The animal declined to.

70
00:05:49,560 --> 00:05:51,270
Yate landslips.

71
00:06:03,330 --> 00:06:10,590
You have to make sure that these lines are tangent to the circles like this line segment where the control

72
00:06:10,590 --> 00:06:10,950
key.

73
00:06:11,540 --> 00:06:12,200
This circle.

74
00:06:14,130 --> 00:06:16,470
Daniel, adoption and click on the occupant.

75
00:06:18,930 --> 00:06:22,740
So the line segment prison, the control key, select this circle.

76
00:06:23,890 --> 00:06:26,630
Like the Tenjin talks, like on the ultimate.

77
00:06:28,470 --> 00:06:29,030
Gladly.

78
00:06:29,280 --> 00:06:31,920
We need to make the lines tangent to the circles.

79
00:06:46,440 --> 00:06:47,520
This line segment.

80
00:06:48,990 --> 00:06:51,930
Circle holding the control key.

81
00:06:53,630 --> 00:06:54,840
To the Daniel Tosh.

82
00:07:16,730 --> 00:07:20,770
Now we need to trim the unwanted by the click on this trim entities to.

83
00:07:23,580 --> 00:07:27,050
But but but this.

84
00:07:28,630 --> 00:07:29,570
They can document.

85
00:07:31,570 --> 00:07:32,610
There's a sketch button.

86
00:07:35,830 --> 00:07:37,450
Click on this extruded cut to.

87
00:07:39,010 --> 00:07:41,790
Like this flip side to cut tables.

88
00:07:44,280 --> 00:07:46,170
From this condition dropdown list.

89
00:07:47,360 --> 00:07:48,550
Was this two hour auction?

90
00:07:50,020 --> 00:07:51,130
Take on the okay button.

91
00:07:52,680 --> 00:07:56,210
Now go to this different cemetery dropdown and choose the plane to.

92
00:08:00,620 --> 00:08:06,970
What did this feature manager design, three button choose toppling as the first reference.

93
00:08:08,980 --> 00:08:11,930
Is the offset value to 150 units?

94
00:08:13,340 --> 00:08:13,730
Into.

95
00:08:15,030 --> 00:08:16,420
And click on The Ultimate.

96
00:08:18,480 --> 00:08:19,590
She was displaying to.

97
00:08:21,060 --> 00:08:27,180
Then choose the sketch option from the pop up menu, spacebar and the keyboard and then choose this

98
00:08:27,180 --> 00:08:27,760
normal to but.

99
00:08:29,550 --> 00:08:31,710
Now back on the circle to.

100
00:08:32,770 --> 00:08:36,520
Drag the up in horizontal alignment with.

101
00:08:37,680 --> 00:08:38,250
This point.

102
00:08:41,830 --> 00:08:43,250
A circle like this.

103
00:08:44,470 --> 00:08:48,380
The radius rallying 75 units into.

104
00:08:50,210 --> 00:08:51,040
Gondar Okimoto.

105
00:08:54,440 --> 00:09:01,870
Will the smart dimension to this point at this point change its value to 150 units?

106
00:09:05,490 --> 00:09:05,880
Mandan.

107
00:09:07,740 --> 00:09:08,960
Click on the exit sketchbook.

108
00:09:11,040 --> 00:09:12,730
This extruded boss based to.

109
00:09:15,370 --> 00:09:16,690
This was dedication button.

110
00:09:17,890 --> 00:09:26,940
Now, from this dropdown list, was this up to surface option in see the face splenetic boxes like this

111
00:09:27,390 --> 00:09:28,980
dogface of the modern.

112
00:09:31,310 --> 00:09:32,780
Like on the welcome mat.

113
00:09:36,000 --> 00:09:36,440
Extinct.

114
00:09:36,520 --> 00:09:42,040
We need to do is we need to create the counterweight or stop face of the modern.

115
00:09:43,990 --> 00:09:47,490
What did this whole desert drop down into this whole resort to?

116
00:09:55,810 --> 00:09:56,950
The whole tape roll out.

117
00:09:57,100 --> 00:10:00,550
We have this untoward option selected.

118
00:10:02,810 --> 00:10:03,670
It sure does.

119
00:10:03,920 --> 00:10:04,130
Sure.

120
00:10:04,350 --> 00:10:06,630
Custom sizing, check boxes selected.

121
00:10:08,720 --> 00:10:11,040
Now, the two hold diameter is.

122
00:10:12,270 --> 00:10:13,390
75 units.

123
00:10:14,480 --> 00:10:17,980
Jean Dispended, a 75 dappy.

124
00:10:19,520 --> 00:10:24,530
Now we need to specify the countable diameter, which is one hundred units under it.

125
00:10:26,980 --> 00:10:35,050
Next thing you need to specify, the countable depth is just 20 unquoted, the position stop and then

126
00:10:35,310 --> 00:10:37,040
select the top face of the modern.

127
00:10:41,820 --> 00:10:43,380
Least of all like this.

128
00:10:45,360 --> 00:10:45,930
Okay, Martin.

129
00:10:47,220 --> 00:10:51,760
We need to locate this comparable hole at its exact location.

130
00:10:53,350 --> 00:10:55,290
Look on this little sign here.

131
00:10:56,370 --> 00:11:02,060
Justice this it's full and then choose this sketch option on the public many.

132
00:11:04,790 --> 00:11:07,100
Sketching enlightenment, not select this.

133
00:11:08,820 --> 00:11:12,780
Right here in prison, holder control key and sitting this ultrarich.

134
00:11:14,280 --> 00:11:18,110
She looked as concentric option from the adulations rule out other properties.

135
00:11:18,240 --> 00:11:19,050
Property manager.

136
00:11:21,170 --> 00:11:21,500
London.

137
00:11:23,050 --> 00:11:23,910
They did Scotchman.

138
00:11:26,580 --> 00:11:29,230
Counterposed hall is at its exact location.

139
00:11:33,470 --> 00:11:37,280
We need to create two more balls on this one on this case.

140
00:11:37,430 --> 00:11:38,510
And one on this face.

141
00:11:39,780 --> 00:11:42,860
So click in this box and type.

142
00:11:44,800 --> 00:11:45,760
Simple whole option.

143
00:11:49,060 --> 00:11:50,350
Need to select a location.

144
00:11:51,550 --> 00:11:52,800
We want to create the whole.

145
00:11:54,830 --> 00:11:56,750
I'm going to select this face.

146
00:11:58,730 --> 00:12:00,480
The depth value for the hole is.

147
00:12:01,660 --> 00:12:02,570
Five units.

148
00:12:03,040 --> 00:12:07,030
Twenty five year into the diameter of the hole is.

149
00:12:09,580 --> 00:12:10,440
Thirty five units.

150
00:12:10,980 --> 00:12:12,300
Yes, this and.

151
00:12:14,990 --> 00:12:15,930
The okay button.

152
00:12:19,210 --> 00:12:19,540
OK.

153
00:12:19,710 --> 00:12:22,740
We need to place this whole at its exact location.

154
00:12:24,400 --> 00:12:29,650
The Columbus sign said it skipped six and then to this edit schedule.

155
00:12:31,670 --> 00:12:34,180
It's like this of the whole.

156
00:12:37,350 --> 00:12:40,810
This age of the model while pressing the control key.

157
00:12:42,770 --> 00:12:43,920
This concentric option.

158
00:12:45,200 --> 00:12:46,180
The condo occupant.

159
00:12:48,430 --> 00:12:50,140
Look, on this exit sketch, what?

160
00:12:52,600 --> 00:12:58,160
In the same way, you can create a hole on this face of the model.

161
00:13:00,360 --> 00:13:00,830
Spacebar.

162
00:13:01,310 --> 00:13:04,250
And you keep that to this isometric button.

163
00:13:06,350 --> 00:13:07,540
This is the final model.

164
00:13:08,780 --> 00:13:10,190
Thank you for watching this week.
