1
00:00:10,620 --> 00:00:14,770
Hello, welcome to the world of computer aided design with solid walls.

2
00:00:15,480 --> 00:00:21,110
In today's session, we are going to create this solid part of the front for you.

3
00:00:21,540 --> 00:00:23,700
Top view, inside view of the model.

4
00:00:23,820 --> 00:00:28,320
I'd given you all the dimensions that are required to create this model.

5
00:00:28,710 --> 00:00:29,940
I'm present in these views.

6
00:00:31,410 --> 00:00:32,360
Create this model.

7
00:00:32,580 --> 00:00:40,560
First of all, we need to create this sweep, each of which is the base feature for this model to start

8
00:00:40,560 --> 00:00:40,800
with.

9
00:00:41,040 --> 00:00:47,610
We need to create one optical line which made us 175 units to start with.

10
00:00:47,790 --> 00:00:49,410
We need to create one one take a line.

11
00:00:50,330 --> 00:00:52,060
Made just 175 units.

12
00:00:52,290 --> 00:00:56,010
And one point is on the line, which may just 145 units.

13
00:00:56,910 --> 00:01:00,630
And we need to do it in the sketching environment of solid models.

14
00:01:01,500 --> 00:01:03,200
Click on the sketch command manager.

15
00:01:03,420 --> 00:01:08,880
Next, click on the sketch to link the front flame at the sketching plain.

16
00:01:10,710 --> 00:01:13,450
Choose the line to create one.

17
00:01:13,660 --> 00:01:14,540
What, take a line.

18
00:01:15,300 --> 00:01:16,730
And one horizontal line.

19
00:01:19,660 --> 00:01:27,340
Was a smart dimension to the vertical line segment and changed the value to 175.

20
00:01:28,000 --> 00:01:35,470
And to select the horizontal line segment and change the value to 145 units and presented.

21
00:01:37,630 --> 00:01:42,430
If you see radius value, here is 90 units.

22
00:01:47,270 --> 00:01:53,000
To choose this sketch Phillip Tooltip into the value as 90.

23
00:01:53,070 --> 00:01:54,330
In this edit, box him

24
00:01:57,000 --> 00:01:58,170
entities to fill it up.

25
00:01:58,530 --> 00:02:03,720
This line segment and this lengthy review of the Philip is displayed here.

26
00:02:04,020 --> 00:02:05,470
Now click on the OK.

27
00:02:06,250 --> 00:02:11,760
So we have created the sketch for the basic sweep feature on the silk button.

28
00:02:13,170 --> 00:02:20,360
Next click on this exhibit sketch button to get out of this kitchen and laminate click on this features.

29
00:02:20,370 --> 00:02:22,770
Come on manager and choose.

30
00:02:22,770 --> 00:02:26,500
This script was based to sweep.

31
00:02:26,550 --> 00:02:31,650
Property manager is displayed on the profile and botched rollout.

32
00:02:31,770 --> 00:02:38,300
Select this circular profile radio button into the value of diameter as 97.

33
00:02:38,580 --> 00:02:49,000
In this edit box, select this ten feature checkbox and enter the value of thickness as 16.

34
00:02:49,200 --> 00:02:56,670
In this edit box you can see the thickness thicknesses edit in other dedication, which is something

35
00:02:56,670 --> 00:02:57,570
we do not want.

36
00:02:57,930 --> 00:02:59,040
So click on this.

37
00:02:59,410 --> 00:02:59,910
We will.

38
00:02:59,930 --> 00:03:00,720
Static in button.

39
00:03:01,930 --> 00:03:02,820
Now picked up.

40
00:03:03,180 --> 00:03:06,280
Okay button and the stream feature is created.

41
00:03:09,640 --> 00:03:15,660
Next thing that we need to do is we need to create a flinch at the top end of the week feature.

42
00:03:17,710 --> 00:03:25,840
And if you look in the drawing, Damietta for this outer circle is two 25 units and the thickness value

43
00:03:26,320 --> 00:03:28,960
for this plane is 25 units.

44
00:03:29,680 --> 00:03:37,060
So selling this stuff face on the sweet feature of many is displayed to the sketched button from this

45
00:03:37,060 --> 00:03:37,430
bulb of.

46
00:03:38,740 --> 00:03:41,580
We are into the sketching alignment of solid bones.

47
00:03:42,480 --> 00:03:48,850
There's the spacebar when you keep back and then choose this normal to button from the orientation diatom

48
00:03:50,280 --> 00:03:53,240
with the circle to create a circle.

49
00:03:54,080 --> 00:03:54,910
At this point.

50
00:03:58,500 --> 00:04:05,730
Is to reduce value to twenty five by two

51
00:04:08,710 --> 00:04:11,580
at the diameter values to 25.

52
00:04:12,070 --> 00:04:17,910
So we need to reduce the value to half misconduct goes down.

53
00:04:19,270 --> 00:04:25,720
So if you see we have a certain level at the center of this flinched with the diameter value of sixty

54
00:04:25,720 --> 00:04:26,500
five minutes.

55
00:04:27,460 --> 00:04:31,310
So again, to the circle, to the center

56
00:04:34,570 --> 00:04:42,100
this time changed the radius value to sixty five by two because the close dialogue button.

57
00:04:44,110 --> 00:04:47,440
Now click on the exit sketch button to get out of the sketching.

58
00:04:47,530 --> 00:04:51,500
And when you say extruded boss based tool.

59
00:04:53,650 --> 00:04:58,170
And in this depth edit box type 25.

60
00:05:00,310 --> 00:05:06,240
And there's techniques for this flange is twenty five minutes on the locomotive.

61
00:05:08,510 --> 00:05:11,910
Now we need to create these smaller holes on the flinch.

62
00:05:13,280 --> 00:05:20,110
These holes run across the so-called friends of a circle, which is having a diameter radio one every

63
00:05:20,120 --> 00:05:21,000
five minutes.

64
00:05:22,580 --> 00:05:28,730
Also, the diameter value for this model is this twenty point five units and these holes are eight in

65
00:05:28,730 --> 00:05:29,050
number.

66
00:05:31,810 --> 00:05:39,940
So we need to create these simple rules from the many more go to this insert option that just features.

67
00:05:40,150 --> 00:05:44,430
And then we have this simple rule to click on it.

68
00:05:46,540 --> 00:05:50,550
You're prompted to select a location on a plan, a face for the center of the whole.

69
00:05:51,040 --> 00:05:54,250
I will click anywhere on the top face of this flinch.

70
00:05:56,530 --> 00:06:03,010
Not the depth for this hole is 20 feet and the diameter value is twenty point five.

71
00:06:06,460 --> 00:06:08,440
The okay button to create the whole.

72
00:06:12,880 --> 00:06:18,620
As I said, this whole run through the circumstance of a circle which has a damage to value of one,

73
00:06:18,660 --> 00:06:19,720
a defined goodness.

74
00:06:20,700 --> 00:06:23,740
So we need to look at the whole at its proper location.

75
00:06:26,600 --> 00:06:30,730
So like this whole from the design tree and.

76
00:06:32,570 --> 00:06:38,910
Like this, I did sketch option from the public menubar, you got into the sketching in my.

77
00:06:40,540 --> 00:06:49,170
It's the spacebar on your key back and then choose this moment to select the center of this whole press

78
00:06:49,680 --> 00:06:57,460
and really the control key on your back and select the Origin Point Properties property manager is displayed

79
00:06:58,300 --> 00:06:59,760
on ad relations rollout.

80
00:07:00,480 --> 00:07:03,400
Choose this what they call option.

81
00:07:07,010 --> 00:07:11,020
On the okay button now click on Despond Dimension to.

82
00:07:14,350 --> 00:07:28,510
On the origin link at the center of the whole change this value to one eighty five by two, the diameter

83
00:07:29,020 --> 00:07:36,580
of the circle around the circle, friends of which this molecule runs is one eighty five minutes on

84
00:07:36,580 --> 00:07:37,330
the okay button.

85
00:07:39,220 --> 00:07:44,020
Now we have look at this whole click on the sketch button.

86
00:07:46,700 --> 00:07:50,870
This hole is at that exact location, as we saw.

87
00:07:51,080 --> 00:07:52,460
These ones are ACON number.

88
00:07:52,970 --> 00:07:56,990
Now go to the Selenia back and drop down to the circular pattern to.

89
00:07:59,460 --> 00:08:01,050
They showed this equal spacing.

90
00:08:01,950 --> 00:08:02,970
But he selected him.

91
00:08:04,090 --> 00:08:10,610
And then the number of instances added box make showed a value of eight is dim features to a pattern.

92
00:08:11,040 --> 00:08:22,440
Is this full feature, like in this pattern X is eight box and then select this base of the flange on

93
00:08:22,440 --> 00:08:23,220
the ocular.

94
00:08:27,210 --> 00:08:30,800
Of Falls is created on the Flinch Similarily.

95
00:08:31,240 --> 00:08:33,740
We need to create this flange on this site.

96
00:08:33,880 --> 00:08:36,230
Also this time, Selek.

97
00:08:36,550 --> 00:08:39,740
This phase of the basic sweep feature.

98
00:08:40,300 --> 00:08:44,180
And choose the sketch button from this pop up menu button.

99
00:08:45,790 --> 00:08:48,610
It's the spacebar on your keypad and choose the normal two button.

100
00:08:50,320 --> 00:08:53,690
Circle at the center point.

101
00:08:55,200 --> 00:09:06,940
Change the radius value two to twenty five by two and click on the okay button in create a circle the

102
00:09:06,940 --> 00:09:09,220
diameter value of sixty five units.

103
00:09:13,260 --> 00:09:17,170
You find a way to conduct closed down 12.

104
00:09:19,160 --> 00:09:28,610
Gone to a good sketch button, ended up pop Marlink and landed like Onda extruded boss based feature

105
00:09:28,610 --> 00:09:33,830
to make the sketch, make the inner circle.

106
00:09:33,830 --> 00:09:41,840
Also you see in the distance, it invokes already a value of creative finest to so click on the okay

107
00:09:41,840 --> 00:09:43,990
button to create this extruded feature.

108
00:09:46,390 --> 00:09:59,230
Now, all we need to create the holes like we created the stuff, flinch, insert each us, and here

109
00:09:59,230 --> 00:10:00,790
we have this simple tool here.

110
00:10:03,250 --> 00:10:05,650
I want to create holes on this face.

111
00:10:05,860 --> 00:10:07,270
So I was sitting this face

112
00:10:09,970 --> 00:10:13,000
depth for the whole just is twenty five minutes, which is fine.

113
00:10:13,800 --> 00:10:19,560
And diameter is twenty point five units day twenty point five in this edit box.

114
00:10:19,900 --> 00:10:21,430
Then click on this.

115
00:10:21,460 --> 00:10:21,690
OK.

116
00:10:24,160 --> 00:10:30,610
Select this whole feature from the design tree and choose this edit sketch button from the public menu.

117
00:10:32,080 --> 00:10:33,680
Yeah, I'm just sketching environment.

118
00:10:34,780 --> 00:10:35,740
There's the space Bob.

119
00:10:38,810 --> 00:10:45,290
Then choose this moment to button from the orientation title press and hold the control key on your

120
00:10:45,290 --> 00:10:45,830
key back.

121
00:10:46,220 --> 00:10:52,270
So like the center of this whole select origin and choose this particular option.

122
00:10:54,420 --> 00:11:03,420
The okay button from the properties property manager do the small damage to select these two once.

123
00:11:07,530 --> 00:11:13,320
This value will be one 85 by two back on the okay button.

124
00:11:15,120 --> 00:11:21,240
We have located this call also on the exit sketch button to get out of the kitchen and management.

125
00:11:25,100 --> 00:11:27,810
Will the circular pattern tool from this dropdown?

126
00:11:30,860 --> 00:11:32,420
Well, the values are set here.

127
00:11:34,520 --> 00:11:39,520
We need to select the features to baton each and that we need to baton is this whole.

128
00:11:42,870 --> 00:11:48,210
Next, click on this battle Nix's and invokes and then select this phrase.

129
00:11:51,070 --> 00:11:56,310
They can document you have created the balls on this flinch also.

130
00:11:58,060 --> 00:12:02,050
Next thing we need to do is we need to create this extruder feature.

131
00:12:05,120 --> 00:12:11,290
Can see this face of the feature is at a distance of 240 units from this end.

132
00:12:12,690 --> 00:12:20,500
I'm going to create a plane which is at a distance of 240 units from this face of the flinch.

133
00:12:21,890 --> 00:12:23,840
Go to the reference geometry dropdown.

134
00:12:24,190 --> 00:12:32,620
And here we have this plane to Austria, France as this phase of the Lynge.

135
00:12:35,260 --> 00:12:37,240
We want to splain on the other side.

136
00:12:37,330 --> 00:12:40,580
So select this flip offset checkbook's.

137
00:12:42,790 --> 00:12:45,860
Change the distance value to 240 Europes.

138
00:12:47,900 --> 00:12:48,510
Click on.

139
00:12:48,810 --> 00:12:49,050
OK.

140
00:12:51,120 --> 00:12:55,460
Here is the plane just required to create this extruded.

141
00:12:55,490 --> 00:12:58,210
But the this plane.

142
00:12:59,430 --> 00:13:01,860
The sketch option from the public man.

143
00:13:04,510 --> 00:13:07,410
The want to keep bad and then choose this moment to abandon.

144
00:13:09,530 --> 00:13:15,580
If you see the damage or value for this outer secular parties, 50 units.

145
00:13:17,310 --> 00:13:21,230
So I'm going to create a circle using the circle to.

146
00:13:22,760 --> 00:13:28,750
Dilute the value of 50 units, like the radius value here as 25 units.

147
00:13:36,410 --> 00:13:43,430
A tip sketch button from the features, come on, manager to this extruded boss base to.

148
00:13:46,710 --> 00:13:50,010
The direction when roll out from this condition, drop dropdown list.

149
00:13:50,970 --> 00:13:56,470
Take this up to next option, then click on this Occupy.

150
00:14:00,240 --> 00:14:06,750
This think that we need to do this, we need to create a comfortable boat, which is having a boat diameter

151
00:14:06,750 --> 00:14:13,920
of 30, 40 units and vote them out of 28 units and the whole diameter is 20 units.

152
00:14:15,040 --> 00:14:20,370
So you only have this whole result dropped down in the hole was up to.

153
00:14:22,920 --> 00:14:26,140
The whole type area just hold tight.

154
00:14:26,230 --> 00:14:26,980
Is comfortable.

155
00:14:27,490 --> 00:14:28,720
Make sure it is selected.

156
00:14:32,210 --> 00:14:35,030
Also, make sure the show does stem sizing.

157
00:14:35,530 --> 00:14:36,860
Checkboxes selected him.

158
00:14:38,480 --> 00:14:43,550
All the values are secure, like the two who are diameter is 20 units.

159
00:14:44,750 --> 00:14:46,940
Countable diameter is 24 units.

160
00:14:47,270 --> 00:14:49,490
And the comfortable depths?

161
00:14:49,610 --> 00:14:50,780
Twenty eight units.

162
00:14:51,050 --> 00:14:57,170
We just need to select the face on which we want to create this outer board.

163
00:14:57,770 --> 00:14:59,660
Select this face.

164
00:15:03,110 --> 00:15:14,480
Extruded feature game playing at the center of this cannot extruded feature on the okay button to create

165
00:15:14,480 --> 00:15:16,340
this comfortable.

166
00:15:23,280 --> 00:15:28,070
That's the space, keep on, keep back and choose this isometric button.

167
00:15:29,890 --> 00:15:38,670
You can hide the visibility of this plane by selecting it and then thinking on this height option in

168
00:15:38,680 --> 00:15:39,200
this way.

169
00:15:39,310 --> 00:15:41,360
We have created this thought model.

170
00:15:42,280 --> 00:15:43,620
Thank you for watching this reading.
