1
00:00:08,480 --> 00:00:12,980
Hello, welcome to the world of computer aided design with solid votes.

2
00:00:13,960 --> 00:00:14,770
Today's session.

3
00:00:15,120 --> 00:00:17,940
You are going to create the model of a spring.

4
00:00:18,610 --> 00:00:24,270
The views and dimensions that will be required to create this spring model are given here.

5
00:00:25,110 --> 00:00:30,570
Drying file containing the drying view is available in the resource section for download.

6
00:00:31,220 --> 00:00:32,310
Well, let's get started.

7
00:00:33,240 --> 00:00:39,980
Yet this model, first of all, we need to create a helical cup to go to the features.

8
00:00:39,990 --> 00:00:40,830
Come on, manager.

9
00:00:41,730 --> 00:00:43,620
And from this comes dropdown.

10
00:00:44,040 --> 00:00:46,230
Choose the Helix and Speigel to.

11
00:00:48,030 --> 00:00:50,880
Next, choose the front, clean as the sketching.

12
00:00:52,740 --> 00:01:02,230
We had to circle having a radius value of twenty five units to the circle to look at the origin for

13
00:01:02,230 --> 00:01:03,520
the center point of the circle.

14
00:01:05,540 --> 00:01:09,470
Create a circle with the radius value of 25 units.

15
00:01:12,000 --> 00:01:14,510
Glenda closed out of button, those a circle.

16
00:01:14,700 --> 00:01:17,810
Property manager now of the sketch.

17
00:01:17,940 --> 00:01:19,650
Using this exit sketch part of.

18
00:01:22,280 --> 00:01:26,820
Alex Bitel, property manager, is displayed here.

19
00:01:27,700 --> 00:01:30,930
I put the spring is seventy two point five.

20
00:01:30,930 --> 00:01:32,920
I meant the height.

21
00:01:33,670 --> 00:01:35,120
Red box should have this value.

22
00:01:37,220 --> 00:01:43,680
It just denim really set here, start angulated box should have a value of zero degrees.

23
00:01:45,160 --> 00:01:51,240
Make sure this clockwise radio button is selected, you click on the okay.

24
00:01:52,950 --> 00:01:54,790
That's the spacebar on your keyboard.

25
00:01:55,120 --> 00:01:57,090
And then choose this isometric button.

26
00:01:57,910 --> 00:02:00,600
We have created the helical bot on the spring.

27
00:02:02,060 --> 00:02:04,030
Now we need to create this right.

28
00:02:04,440 --> 00:02:13,720
And clip of the that mentions that will be used to create this end clip given in these few choose the

29
00:02:13,720 --> 00:02:20,810
front pane on the features design trick and then choose this sketch button from the Pop-Up menu.

30
00:02:21,120 --> 00:02:21,330
This.

31
00:02:22,950 --> 00:02:30,980
The spacebar will go, orientation, dialogue and next click on this normal to button click on this

32
00:02:31,760 --> 00:02:37,900
centerpoint up to and from this dropdown at the center point of the point of the OPK.

33
00:02:39,090 --> 00:02:43,340
Barack, the cursor on the horizontal direction click.

34
00:02:48,060 --> 00:02:54,550
Create an arc, a point that goes as shows a value near to 75 degree.

35
00:02:57,200 --> 00:03:02,180
You see here, and the value we have is 75 people's.

36
00:03:04,880 --> 00:03:14,600
To the spot damage to the centerpoint and then his plus point of the arc is the diamond shift and change

37
00:03:14,600 --> 00:03:14,730
it.

38
00:03:14,980 --> 00:03:23,450
Do you think on this point, the origin point and then this plus point of the op ed plays, the angle

39
00:03:23,450 --> 00:03:25,970
value changed to seventy five to.

40
00:03:27,810 --> 00:03:37,580
Now choose to point off, to make up for the first point, doffed second point and get them up like

41
00:03:37,580 --> 00:03:37,940
this.

42
00:03:41,930 --> 00:03:42,180
An.

43
00:03:44,320 --> 00:03:46,330
So this went up to OK.

44
00:03:47,820 --> 00:03:54,310
The control key on the keypad and select this origin point of choose this, make what they call option

45
00:03:54,550 --> 00:03:56,280
from the pop up menu display.

46
00:03:59,890 --> 00:04:03,900
Seen the driving distance value is nineteen point two.

47
00:04:07,310 --> 00:04:12,420
You know, the determined damage to select the Wagin and select the standpoint of the.

48
00:04:14,050 --> 00:04:22,450
Sees the damage and value of the nineteen point to take on the book about Selek, this and this.

49
00:04:25,280 --> 00:04:30,660
And choose this tangent option from the ad relations rollout of the property.

50
00:04:31,910 --> 00:04:37,710
Property manager on the okay button despite damage in two.

51
00:04:38,150 --> 00:04:42,430
And so I think this at least the damage that.

52
00:04:45,240 --> 00:04:46,620
The sketches fully define.

53
00:04:49,560 --> 00:04:50,740
The exit sketch button.

54
00:04:54,190 --> 00:05:00,750
One more thing that we need to do is walk into this sketch we created earlier, select the lower end

55
00:05:00,750 --> 00:05:02,040
point of the arc.

56
00:05:02,990 --> 00:05:09,650
You did first, doesn't hold the trophy on your belly fat and then select the medical boards.

57
00:05:11,790 --> 00:05:14,540
The relations fallout out of the properties.

58
00:05:14,670 --> 00:05:17,460
Property manager, select this year's.

59
00:05:20,910 --> 00:05:23,560
We are getting a message that item is unsolvable.

60
00:05:25,130 --> 00:05:32,970
What the sketches or define or select this coincident constraint, which is applied automatically and

61
00:05:32,990 --> 00:05:33,530
deleted.

62
00:05:35,350 --> 00:05:41,110
See, now we have this message to sketches no longer or defined back on the occupant.

63
00:05:42,880 --> 00:05:44,690
Now look on the sketch button.

64
00:05:49,190 --> 00:05:56,440
We need to create space for this, but see this value for this office.

65
00:05:56,480 --> 00:06:00,070
Twelve point five units and this distance valued at 60 units.

66
00:06:01,950 --> 00:06:05,850
This right plain and to the sketch option from this photo of Nick.

67
00:06:08,060 --> 00:06:13,870
There's the space bar on your key back and back on this normal to button the line to.

68
00:06:17,000 --> 00:06:18,110
Line like this.

69
00:06:22,920 --> 00:06:26,700
He this that image is close to you.

70
00:06:27,300 --> 00:06:28,170
For the first point.

71
00:06:29,610 --> 00:06:33,220
Second point and third escapee.

72
00:06:33,840 --> 00:06:35,600
Is it the Circle property manager?

73
00:06:37,230 --> 00:06:39,910
It doesn't hold the control key on your back.

74
00:06:41,080 --> 00:06:43,150
If the circle sitting this line me.

75
00:06:44,220 --> 00:06:45,670
Then choose this engine.

76
00:06:49,270 --> 00:06:50,240
Well, dalam button.

77
00:06:51,430 --> 00:06:53,410
Create a line segment like this.

78
00:06:53,590 --> 00:06:55,310
So I think front quadrant of the.

79
00:06:58,490 --> 00:07:00,760
Got this tremendous D tool and trim.

80
00:07:01,170 --> 00:07:03,340
This part of the sketch spot.

81
00:07:03,570 --> 00:07:03,980
And this.

82
00:07:08,490 --> 00:07:17,110
Well, the smart dimension to the arc change this radius value twelve point five.

83
00:07:19,220 --> 00:07:22,480
Again, Rome, you point out to.

84
00:07:25,350 --> 00:07:28,950
Maybe up on this line segment at this point.

85
00:07:31,050 --> 00:07:32,910
And place it out like this.

86
00:07:35,020 --> 00:07:43,390
We can document select this, OK, select this line segment and apply the Tenjin constraint between

87
00:07:43,390 --> 00:07:43,710
the two.

88
00:07:44,900 --> 00:07:45,450
Okay, button.

89
00:07:49,440 --> 00:07:49,850
Kate.

90
00:07:51,290 --> 00:08:02,200
It's a bit silly at this point, at this point of the op and make them pointed.

91
00:08:03,340 --> 00:08:10,640
OK, but now select then point of this, OK, and press and hold the control key on your back.

92
00:08:11,440 --> 00:08:15,230
Select this pixilate, this fierce option.

93
00:08:16,340 --> 00:08:20,810
The ad religion stood up and flick on the people again.

94
00:08:20,950 --> 00:08:25,480
Listen to the control key on key back like this up like this arc.

95
00:08:26,160 --> 00:08:29,490
Then choose this tangent button from the ad relations, the.

96
00:08:32,820 --> 00:08:41,200
OK, your bottom interest, the spacebar on it, keep back to this moment, but now we need to trim

97
00:08:41,260 --> 00:08:49,210
this unwanted part, look on the trim entities to implement this unwanted itch for the right side and

98
00:08:49,210 --> 00:08:49,520
flip.

99
00:08:49,690 --> 00:08:49,900
Done.

100
00:08:51,690 --> 00:08:54,930
Now we need to create a sketch for the left side and.

101
00:08:57,360 --> 00:09:01,290
On the okay button and click on the exit sketchpad.

102
00:09:03,140 --> 00:09:05,480
We need to create a sketch on this site.

103
00:09:05,690 --> 00:09:10,530
So we need to have a plan here on the reference to military dropped down.

104
00:09:10,870 --> 00:09:14,590
The features come on, manager back on this plane to.

105
00:09:16,560 --> 00:09:19,860
Plus, Rifkin's added, Fox is active in the Plains property market.

106
00:09:21,990 --> 00:09:28,080
Look at this picture manager designed to button choose the front plane as the first shift.

107
00:09:28,750 --> 00:09:38,290
Now enter a valley equal to seventy two point five in this offset distance, a digital document you

108
00:09:38,290 --> 00:09:38,560
have.

109
00:09:39,220 --> 00:09:40,140
You take a plane here.

110
00:09:41,160 --> 00:09:43,610
So this plane and then choose this sketch.

111
00:09:43,700 --> 00:09:43,920
But.

112
00:09:45,610 --> 00:09:48,870
The spaceport on you keep that and make on this normal do.

113
00:09:54,620 --> 00:09:55,810
Choose this center point.

114
00:09:55,880 --> 00:09:59,900
OK, to take on the origin or the center point.

115
00:10:01,370 --> 00:10:04,100
Pop it up like this.

116
00:10:09,640 --> 00:10:10,970
Second point, Lee.

117
00:10:11,460 --> 00:10:14,310
Because the show's value of seventy five years.

118
00:10:15,520 --> 00:10:16,410
The okay button.

119
00:10:17,670 --> 00:10:21,390
There's a small dimension to the origin point.

120
00:10:21,620 --> 00:10:25,750
Still, at this point, he changed his value to twenty five euros.

121
00:10:28,450 --> 00:10:31,470
Make this point the centerpoint.

122
00:10:34,800 --> 00:10:37,260
Change the value to 75 degree.

123
00:10:39,470 --> 00:10:41,640
I mean, choose three point up to.

124
00:10:43,480 --> 00:10:45,340
Point, sticking point.

125
00:10:51,920 --> 00:11:02,630
OK, but the spot damage to this point of the city center point changed the distance value to nineteen

126
00:11:02,630 --> 00:11:10,510
point of press and hold it control key on your key back to this point to make the center point.

127
00:11:11,780 --> 00:11:15,190
I'll choose this horizontal option from the abolition school of.

128
00:11:17,650 --> 00:11:22,990
From the button game press and hold the control key and select this out.

129
00:11:23,850 --> 00:11:24,400
Then this.

130
00:11:27,070 --> 00:11:28,460
The tangent option to stay.

131
00:11:30,820 --> 00:11:35,050
The ocular, the dimensioned tooth and.

132
00:11:36,350 --> 00:11:36,610
Contest.

133
00:11:36,930 --> 00:11:38,950
OK, place the damage left.

134
00:11:40,460 --> 00:11:43,350
OK, but now the sketch is fully defined.

135
00:11:48,630 --> 00:11:49,480
The view of that.

136
00:11:51,760 --> 00:11:58,970
Doesn't hold the control key in this end point of the first half, then select Foth from Facilites.

137
00:12:02,340 --> 00:12:05,670
Excuse this B.S. option on the abolition of.

138
00:12:07,200 --> 00:12:10,950
In see, the sketch becomes all defined, McCain going to believe.

139
00:12:10,990 --> 00:12:12,260
Disappointed in Christian.

140
00:12:14,300 --> 00:12:15,770
And then he spoke about.

141
00:12:17,100 --> 00:12:20,990
The contest ended sketch, but next sketch.

142
00:12:21,010 --> 00:12:22,900
We are going to drop in the top for you.

143
00:12:25,180 --> 00:12:26,220
Let us stop playing.

144
00:12:26,650 --> 00:12:29,190
And then the sketch option from the pop up menu.

145
00:12:30,690 --> 00:12:35,830
The spaceport on your key back and looked as normal, too, but the line two.

146
00:12:38,590 --> 00:12:41,410
And you did not take a line like this.

147
00:12:45,270 --> 00:12:49,080
Think this Fatimata so good to this point.

148
00:12:49,480 --> 00:12:52,390
Second point and third point.

149
00:12:56,000 --> 00:12:58,610
Select the circle, that's some pool.

150
00:12:58,670 --> 00:13:01,230
The control key and select this line segment.

151
00:13:02,390 --> 00:13:05,350
Choose the tangent line to locate.

152
00:13:06,820 --> 00:13:10,280
A horizontal line starting from this quadrant of the circle.

153
00:13:12,320 --> 00:13:17,470
This was a trim to trim unwanted.

154
00:13:23,620 --> 00:13:31,720
Won't the smog damage to The View a bit like this, Centerpoint, here?

155
00:13:33,390 --> 00:13:39,570
And select the centerpoint of that is the damage value and change it to 60.

156
00:13:41,640 --> 00:13:50,100
In changed the view back to normal, now select this arc when the might damage in Toulouse active change,

157
00:13:50,220 --> 00:13:58,330
the Spanish 12. fails to the point are to create one arc like this.

158
00:14:07,720 --> 00:14:13,090
It's in the control key when you keep back like this line segment and select this.

159
00:14:14,780 --> 00:14:18,800
Choose the tangent option from this adulations through about.

160
00:14:21,740 --> 00:14:22,860
Into sketch a bit.

161
00:14:26,760 --> 00:14:34,230
Now select this end point of the OP and hold the control key and select this end point of the other.

162
00:14:35,660 --> 00:14:37,660
Choose this coincident button.

163
00:14:39,200 --> 00:14:44,420
OK, but again, Preston, hold the control key and keep back select this.

164
00:14:44,450 --> 00:14:45,880
OK, CIMIC this.

165
00:14:47,110 --> 00:14:49,030
And choose this and option.

166
00:14:50,540 --> 00:14:51,520
We can document.

167
00:14:52,760 --> 00:14:55,990
So we are done with creating the other sketch also.

168
00:14:57,110 --> 00:14:58,370
Look on this exit, Sketchpad.

169
00:14:59,800 --> 00:15:04,900
And we need to combine all the three curves because we have to create a sweet feature.

170
00:15:06,870 --> 00:15:10,880
So from this close dropdown, select this composite go to.

171
00:15:13,740 --> 00:15:15,360
No cynic, the entities.

172
00:15:16,640 --> 00:15:18,290
One by one from the joint media.

173
00:15:25,060 --> 00:15:25,620
Rick Onda.

174
00:15:26,080 --> 00:15:26,290
OK.

175
00:15:27,380 --> 00:15:29,630
Now click on the script boss base to.

176
00:15:31,440 --> 00:15:34,620
Was this circular profile radio button?

177
00:15:36,140 --> 00:15:39,530
The fourth added box, the composite girl is already selected.

178
00:15:40,460 --> 00:15:44,870
Change this diameter value to seven units.

179
00:15:45,710 --> 00:15:47,880
Now click on this okay button twice.

180
00:15:51,270 --> 00:15:52,420
Get out of the sweep.

181
00:15:52,510 --> 00:15:53,470
Property manager.

182
00:15:56,280 --> 00:16:00,120
This week, we have created the model for the spring.

183
00:16:04,140 --> 00:16:08,960
High the visibility of this plane by selecting it and then choosing this high option.

184
00:16:11,430 --> 00:16:14,610
Also, select the sketch and then choose the Haydock.

185
00:16:19,680 --> 00:16:22,730
The spaceport on your key back button.
