1
00:00:08,060 --> 00:00:12,840
Hello, welcome to the world of computer aided design, SolidWorks.

2
00:00:13,610 --> 00:00:20,960
In today's session, you're going to create all the components of a bench choice assembly and then you

3
00:00:20,960 --> 00:00:21,660
will assemble them.

4
00:00:24,230 --> 00:00:27,080
Here we have the image of the bench Wice Assembly.

5
00:00:28,000 --> 00:00:35,000
So different individual components are required to be created first separately as part models, and

6
00:00:35,000 --> 00:00:38,500
then you can assemble them in the assembly environment.

7
00:00:38,500 --> 00:00:46,340
Or SolidWorks can see in the image different components combined together to create this bench vice

8
00:00:46,430 --> 00:00:46,850
assembly.

9
00:00:47,840 --> 00:00:54,440
If you look at the backlist, you can see 10 components here in this assembly.

10
00:00:55,070 --> 00:00:56,230
Let's run as vice party.

11
00:00:57,270 --> 00:00:58,070
Nice job.

12
00:00:58,610 --> 00:01:02,730
Just clear, I think plate basically screw Bob.

13
00:01:03,520 --> 00:01:07,920
Bob Bloops will Phyllis to say screw one and said screw.

14
00:01:08,780 --> 00:01:13,760
Also the quantity of these components is killin here in this quantity.

15
00:01:13,760 --> 00:01:19,320
Copper, as you are already familiar with the fact malling enlargement of old books.

16
00:01:19,580 --> 00:01:26,190
So what you need to do is you need to create all the individual parts of this assembly in the morning

17
00:01:26,220 --> 00:01:33,530
and the drinks to create these individual components available in the resources section for download.

18
00:01:34,010 --> 00:01:41,700
Like destroying shows you the location of different components in the assembly based on the backlists.

19
00:01:41,870 --> 00:01:43,850
We have the first component.

20
00:01:44,570 --> 00:01:46,520
The blacklist is Weisbord.

21
00:01:46,940 --> 00:01:48,940
And the second component is price shock.

22
00:01:49,640 --> 00:01:53,410
So if you look in this trank, we have the box one.

23
00:01:53,930 --> 00:01:55,670
So this part is the wife's body.

24
00:01:57,090 --> 00:01:59,270
The second part is his wife's job.

25
00:01:59,580 --> 00:02:03,320
His wife's shop is going to slide in the box.

26
00:02:04,130 --> 00:02:08,960
We just got in this place, bought it to create the wife's body.

27
00:02:09,500 --> 00:02:11,810
We have these great views here.

28
00:02:12,880 --> 00:02:15,290
Front view, top him and side view.

29
00:02:15,800 --> 00:02:23,150
That'll be required to create the wife's body given here in this image of the dimensions that are required

30
00:02:23,150 --> 00:02:26,750
to create this box available in these views.

31
00:02:27,260 --> 00:02:33,620
As I said, you can download these files from the source Section eight, The Wise Shop.

32
00:02:34,070 --> 00:02:35,270
We have these two views.

33
00:02:36,530 --> 00:02:39,530
Likewise, to create other parts of the assembly.

34
00:02:39,980 --> 00:02:41,300
We have these drawings here.

35
00:02:41,990 --> 00:02:43,410
But one is the dry file.

36
00:02:43,790 --> 00:02:51,500
But the baseplate this is the drying view that would be required to create the Josquin Bob Bloops trauma

37
00:02:52,460 --> 00:03:00,580
lamping plate and see front and talk to the clamping plate is given a little Felicio.

38
00:03:01,530 --> 00:03:05,540
And the set screws using these strikes.

39
00:03:06,530 --> 00:03:14,240
You need to create all the individual components and then save them to fold up that folder.

40
00:03:14,610 --> 00:03:18,980
You can save at any appropriate location you want.

41
00:03:19,790 --> 00:03:25,760
Like I created all the individual parts one by one and then I saved them to this folder.

42
00:03:26,320 --> 00:03:27,500
Material one French.

43
00:03:29,180 --> 00:03:31,370
You see in this folder.

44
00:03:32,210 --> 00:03:34,400
I have all the individual box created here.

45
00:03:35,410 --> 00:03:42,900
Let us see how to assemble these components and create the bench wice assembly in solid votes.

46
00:03:44,120 --> 00:03:50,600
The first two components that we need to assemble are the wife's party and the wife's job.

47
00:03:51,260 --> 00:03:56,600
We are going to assemble these first two components by using my preferences.

48
00:03:57,140 --> 00:03:59,850
So we need to create these made references first.

49
00:04:00,680 --> 00:04:07,310
As I said, the first two components that are going to be assembled are the rice body and the waste

50
00:04:07,310 --> 00:04:07,630
chopped.

51
00:04:08,030 --> 00:04:11,450
So we need to create greater differences between these two.

52
00:04:12,230 --> 00:04:14,280
So go to the file menu.

53
00:04:15,290 --> 00:04:22,160
Choose this open button and seek to open dialog boxes displayed here, approach to the location.

54
00:04:22,550 --> 00:04:28,280
Here you have saved the bank twice, folded up like in my case, I have saved that folder.

55
00:04:28,430 --> 00:04:32,390
The desktop of my computer is the folder.

56
00:04:33,650 --> 00:04:40,700
The bus spot is party selected and then I'll hit the open button.

57
00:04:42,230 --> 00:04:47,480
So the wife's body is open in the morning and environment of solid.

58
00:04:48,390 --> 00:04:56,600
I've to this reference geometry dropdown and if they choose this made reference to see the made reference

59
00:04:56,600 --> 00:04:58,550
property manager is involved here.

60
00:04:59,330 --> 00:05:04,070
Also this primary reference entity selection box becomes active.

61
00:05:04,850 --> 00:05:05,990
So select this.

62
00:05:06,650 --> 00:05:09,140
Face off the model as the primary difference.

63
00:05:11,000 --> 00:05:18,770
You can see the faces highlighted and the secondary reference entity selection box becomes active before

64
00:05:18,770 --> 00:05:21,140
specifying the secondary referenced entity.

65
00:05:21,710 --> 00:05:27,530
We need to select the coincident option from this clearance type dropdown list.

66
00:05:28,990 --> 00:05:35,240
Now we need to specify the secondary defense entity, which is going to be this phase in our case,

67
00:05:36,150 --> 00:05:36,910
like this phase.

68
00:05:36,950 --> 00:05:46,400
By clicking on it, I choose coincident option from this make reference type dropdown list, the secondary

69
00:05:46,400 --> 00:05:49,280
defense entity we selected as highlighted.

70
00:05:50,000 --> 00:05:54,410
Also, this tertiary reference entity selection box is active.

71
00:05:55,310 --> 00:05:56,370
So select.

72
00:05:56,390 --> 00:06:05,150
This phase of the model as tertiary reference entity and select the better option this time from the

73
00:06:05,150 --> 00:06:07,130
make reference type dropdown list.

74
00:06:07,870 --> 00:06:15,980
The reference name added box type Weiss made reference.

75
00:06:19,320 --> 00:06:24,670
That's the name of this made reference X click on this document.

76
00:06:26,280 --> 00:06:29,410
Well, we have applied the Matrix dancers to this model.

77
00:06:30,160 --> 00:06:32,980
Next, we need to open the Weiss job.

78
00:06:33,450 --> 00:06:36,610
Five more to go to the five menu again.

79
00:06:37,310 --> 00:06:38,740
Click on this open button.

80
00:06:39,300 --> 00:06:41,100
And this time choose a wide shot.

81
00:06:41,710 --> 00:06:43,210
And click on the open button.

82
00:06:45,230 --> 00:06:47,530
Separate Bob documenters open.

83
00:06:48,400 --> 00:06:55,420
I mean, go to the reference geometry dropdown and click on the made reference to activate the make

84
00:06:55,420 --> 00:06:55,930
reference.

85
00:06:55,960 --> 00:06:56,890
Property Manager.

86
00:06:57,300 --> 00:07:00,780
In meantime, let's make reference.

87
00:07:08,140 --> 00:07:17,980
And this reference named Eric Fox defense entity in this case is going to be this face of the modern

88
00:07:19,080 --> 00:07:28,240
select, it is highlighted in the secondary defense entity added box becomes active before they specify

89
00:07:28,240 --> 00:07:29,740
the secondary defense entity.

90
00:07:29,980 --> 00:07:34,750
We need to select the corp incident option from this dropdown list.

91
00:07:34,750 --> 00:07:38,350
Here now to specify the secondary defense entity.

92
00:07:39,340 --> 00:07:41,900
Select this face of the modern

93
00:07:44,710 --> 00:07:44,950
game.

94
00:07:44,950 --> 00:07:50,350
Choose the coincident option from this dropdown list that can see the tertiary reference entity.

95
00:07:50,390 --> 00:07:51,710
Edit box is active.

96
00:07:53,350 --> 00:07:57,360
So select this face off tomorrow.

97
00:07:58,940 --> 00:08:05,740
Next, choose an option, this time from this dropdown list and click on the okay button.

98
00:08:08,050 --> 00:08:10,540
So we have applied the made references to this model.

99
00:08:10,540 --> 00:08:15,220
Also, let us see how to assemble these two components.

100
00:08:15,900 --> 00:08:19,960
So go to the file menu, click on the new button.

101
00:08:22,380 --> 00:08:30,550
You sort of got document dialog boxes, display, select, simply button from this title box and then

102
00:08:30,700 --> 00:08:36,160
hit the okay button, start a new SolidWorks assembly document.

103
00:08:37,450 --> 00:08:46,120
So this is the new assembly document which we opened can see the biggest assembly property manager is

104
00:08:46,300 --> 00:08:47,440
active by default.

105
00:08:48,460 --> 00:08:50,260
Also in this open documents.

106
00:08:50,470 --> 00:08:58,300
This box we have the name of the box village we applied to make references and which are currently open

107
00:08:58,510 --> 00:09:02,260
in the Pottermore link and landed facilities.

108
00:09:02,740 --> 00:09:10,670
Wife's body from the selection box and see preview of the whiteboarding is displayed along with the

109
00:09:10,740 --> 00:09:11,120
cursor.

110
00:09:11,980 --> 00:09:17,620
It's always recommended to place the first component of the assembly at the assembly origin.

111
00:09:18,820 --> 00:09:20,890
So click on this okay.

112
00:09:20,890 --> 00:09:27,970
Button from the begin assembly property manager last component, which is the wife's body.

113
00:09:28,000 --> 00:09:31,470
In our case it will be automatically placed at the orange.

114
00:09:33,160 --> 00:09:36,850
Now you need to place the second component in the assembly.

115
00:09:37,990 --> 00:09:47,320
Second component of the assembly, which is based CHOP, is assembled the whiteboarding by using made

116
00:09:47,320 --> 00:09:48,040
references.

117
00:09:48,760 --> 00:09:50,740
Click on this insert components tool.

118
00:09:51,520 --> 00:09:55,050
Insert component property manager becomes active.

119
00:09:56,590 --> 00:09:58,960
Select the wife's job from this open.

120
00:09:58,960 --> 00:10:08,560
Documents this box and see a preview Westshore displayed in the groin area along with because then you

121
00:10:08,720 --> 00:10:15,160
all look so close to the wife's body in the assembly document review of the wife's job after a blind

122
00:10:15,160 --> 00:10:17,890
meets with the wife's body is displayed.

123
00:10:18,360 --> 00:10:20,100
The document, please.

124
00:10:20,110 --> 00:10:28,870
This component at the required location simple left click of the mouse meets specified in the make references

125
00:10:29,290 --> 00:10:32,930
the blank between the Y shop and the whiteboarding automatic.

126
00:10:34,160 --> 00:10:38,040
In this way we have assembled plus two components of this.

127
00:10:38,040 --> 00:10:46,330
And before we go further, we need to close the five document windows of all the parts that are placed

128
00:10:46,480 --> 00:10:47,430
in the assembly at work.

129
00:10:48,390 --> 00:10:49,330
Force them first.

130
00:10:49,600 --> 00:10:59,230
The third component that we need to assemble is the job to keep Nick on this insert components to activate

131
00:10:59,260 --> 00:11:00,340
the insert component.

132
00:11:00,730 --> 00:11:08,050
Property manager can see by default, open dialog boxes displayed in the style box is not displayed

133
00:11:08,050 --> 00:11:08,640
by default.

134
00:11:08,650 --> 00:11:16,930
In your case, you can click on this rather button here, so I'll select this short clip from the list

135
00:11:17,110 --> 00:11:19,060
and then I hit the open button.

136
00:11:19,750 --> 00:11:24,940
Just clip is attached to the cursor anywhere in the trying area.

137
00:11:25,610 --> 00:11:27,700
Please just click now.

138
00:11:27,760 --> 00:11:32,560
We need to add assembly meets, assemble the components list in the center.

139
00:11:33,430 --> 00:11:41,860
So to please this just code in the assembly press and hold onto key on your keyboard and select this

140
00:11:41,860 --> 00:11:51,970
face of the joska, not drag the clue to this hole in the weisbord in C just to appear as transparent

141
00:11:52,450 --> 00:11:55,020
and the selection cursor is replaced by this.

142
00:11:55,020 --> 00:11:56,230
Mark meets cursor.

143
00:11:56,860 --> 00:12:04,990
Now release the left mouse button and auki at this location and see this made up of toolbar is displayed

144
00:12:05,790 --> 00:12:06,580
in the concentric.

145
00:12:06,690 --> 00:12:13,480
I've been chosen by default indicating that concentric mate is the most appropriate mate.

146
00:12:13,710 --> 00:12:16,580
That can be applied between these two companies.

147
00:12:17,700 --> 00:12:21,680
Click on this ADD finished made button from the MAKE toolbar.

148
00:12:22,800 --> 00:12:30,450
Next thing you'll need to do is you need to apply a coincident made between displaying a face of the

149
00:12:30,450 --> 00:12:35,200
choice screw and this face of the voice.

150
00:12:36,030 --> 00:12:40,440
So choose this mate tool from the assembly line manager.

151
00:12:42,670 --> 00:12:49,920
Make property manager is displayed here out like this coincident option from the standard meets.

152
00:12:50,310 --> 00:12:56,070
Pull out and then select this face first and next.

153
00:12:57,060 --> 00:13:01,110
Select this face as soon as you select the faces.

154
00:13:01,290 --> 00:13:04,170
The Mate Pop Up toolbar is involved again.

155
00:13:04,740 --> 00:13:08,940
The Coincident Button children get a preview of the assembly.

156
00:13:09,280 --> 00:13:16,920
The coincident made is displayed in the drawing in I can choose does add finish make button from this

157
00:13:16,920 --> 00:13:19,380
to the next click on this.

158
00:13:19,410 --> 00:13:22,050
Okay button to close the made property map.

159
00:13:23,370 --> 00:13:29,850
By now we have assembled the three components of the assembly at the present stage.

160
00:13:29,970 --> 00:13:39,240
If I tried to take this assembly selecting this component here, then dragging it to info, you can

161
00:13:39,240 --> 00:13:43,380
see the component is going out of the weisbord.

162
00:13:44,200 --> 00:13:46,890
So we need to restrict its degree of freedom.

163
00:13:47,640 --> 00:13:48,390
Do so.

164
00:13:48,630 --> 00:13:53,400
We need to have like the distance made to the waste 40 and the waste.

165
00:13:54,690 --> 00:14:05,040
So again, the Congress made to apply the distance made this time expand this advance made of this rule

166
00:14:05,070 --> 00:14:05,320
out.

167
00:14:05,460 --> 00:14:07,500
We have this distance button here.

168
00:14:08,520 --> 00:14:11,250
This button I you select this button.

169
00:14:11,910 --> 00:14:15,690
Maximum value and minimum value added box has become active.

170
00:14:16,560 --> 00:14:22,350
So we need to specify these limits first so that the waste shop can slide.

171
00:14:22,380 --> 00:14:24,990
But with the wife's body between these limits.

172
00:14:25,740 --> 00:14:26,160
So.

173
00:14:26,160 --> 00:14:36,290
And the value of 60, this maximum value added box in ten and zero in this minimum value added box,

174
00:14:36,750 --> 00:14:43,950
after entering these values, we need to select the entities between which we want to apply this distance

175
00:14:43,950 --> 00:14:45,130
made in.

176
00:14:45,180 --> 00:14:49,590
See, currently we have some face selected here, which is this one.

177
00:14:50,580 --> 00:14:53,040
So this one is not required and selected.

178
00:14:53,880 --> 00:14:54,060
Right.

179
00:14:54,060 --> 00:14:59,310
Click on it and choose the delete option entity that I'm going to select.

180
00:14:59,340 --> 00:15:04,860
Is this feast of choice for next?

181
00:15:05,160 --> 00:15:07,920
I'm going to select this phase of the wife's job,

182
00:15:10,880 --> 00:15:12,180
applying the distance made.

183
00:15:12,450 --> 00:15:15,050
Click on this ocular view.

184
00:15:15,150 --> 00:15:20,080
The effect for the distance mate has applied the specified limits.

185
00:15:20,490 --> 00:15:31,530
Grab this just to notice that the just crew, along with this westropp move between these minutes.

186
00:15:32,040 --> 00:15:37,830
Also, the just two is free to rotate about kids on a scroll.

187
00:15:37,900 --> 00:15:40,980
This made property manager here by clicking on the okay button.

188
00:15:42,130 --> 00:15:52,800
Now click on the insert components to select baseplate and click on the open button is based is attached

189
00:15:52,800 --> 00:15:56,870
to the cursor, not placed anywhere in the drawing.

190
00:15:58,410 --> 00:16:02,620
Used the middle mouse button to rotate and get a better view.

191
00:16:02,980 --> 00:16:03,700
The bots.

192
00:16:05,510 --> 00:16:12,320
Now, Dracul Kosa, all of his baseplate right click on it and then rotate it like this.

193
00:16:16,620 --> 00:16:24,960
Click on this mate to make property manager is a committed to the concentric option from the standard

194
00:16:24,980 --> 00:16:34,890
made to entities to make collection boxes to select this little face of the hole first, then

195
00:16:37,740 --> 00:16:38,850
select this face.

196
00:16:43,040 --> 00:16:52,750
Click on the ad finish made button again, choose the concentric option and select this cylindrical

197
00:16:52,750 --> 00:16:53,200
face.

198
00:16:56,000 --> 00:16:58,980
They select this cylindrical face.

199
00:17:00,320 --> 00:17:04,430
The basically came to the ad finish meat.

200
00:17:05,110 --> 00:17:13,210
But the next thing that we need to do is we need to apply a coincident made between the top face of

201
00:17:13,210 --> 00:17:24,520
this base plate and the bottom face of the voice pointing to the coincident option and make this face

202
00:17:25,360 --> 00:17:30,410
the right story and choose this face off the baseplate.

203
00:17:31,710 --> 00:17:33,350
Click on this ad finish made by.

204
00:17:38,620 --> 00:17:42,160
The first baseplate is assembled with the weisbord.

205
00:17:44,060 --> 00:17:48,140
We need the baseplate at this site of the wife's, he also.

206
00:17:48,740 --> 00:17:51,350
So let's click on the okay button.

207
00:17:51,500 --> 00:17:53,330
Get out of the major property manager.

208
00:17:54,410 --> 00:17:58,310
We can use the meter components to create.

209
00:17:58,840 --> 00:18:01,200
And we don't copy of this baseplate on this.

210
00:18:01,200 --> 00:18:03,710
Seidel's here in this dropdown.

211
00:18:04,220 --> 00:18:09,530
We have this meter components to activate this tool by clicking on it.

212
00:18:10,950 --> 00:18:18,230
The first thing that we need to do after invoking this tool is we need to specify the meter play about

213
00:18:18,230 --> 00:18:19,910
which we won't commit of this company.

214
00:18:22,400 --> 00:18:25,460
Currently, no planes are active or visible on the screen.

215
00:18:26,090 --> 00:18:32,990
So click on this feature, manage their design three button on the property manager.

216
00:18:34,910 --> 00:18:37,460
I want to mirror this component using the front plate.

217
00:18:38,360 --> 00:18:46,290
So I'm going to click on the front line using the feature design, treat the components stomata.

218
00:18:47,330 --> 00:18:57,290
I would select this baseplate next week on the okay button and see we have this base plate on the other

219
00:18:57,290 --> 00:18:57,620
side.

220
00:18:57,730 --> 00:19:03,290
Also, the next component that we need to add to this assembly is the clamping plate.

221
00:19:04,080 --> 00:19:11,400
So I can click on this insert components to this time the tapping plate and hit the open button.

222
00:19:12,050 --> 00:19:13,490
It is attached to the cursor.

223
00:19:15,110 --> 00:19:20,330
They said anywhere in the joint, if you use the middle mouse button.

224
00:19:21,670 --> 00:19:22,510
Take the model.

225
00:19:24,880 --> 00:19:25,630
Fundamentally, a.

226
00:19:27,370 --> 00:19:34,810
Drank that kosa or this clapping plate, right, click on it and then rotate it like this.

227
00:19:39,460 --> 00:19:46,620
Click on the maid to remove the maid property manager concentric option from the standard, makes it

228
00:19:46,620 --> 00:19:55,210
all out and then select this cylindrical phase of the pull on the wife's job.

229
00:19:57,790 --> 00:20:00,930
They select this cylindrical face of the hole on the clamping.

230
00:20:00,940 --> 00:20:01,270
Click

231
00:20:05,590 --> 00:20:06,850
on this add finish made button.

232
00:20:10,390 --> 00:20:19,260
I mean, she was just concentric option, like this cylindrical piece of the hole on the ice shop and

233
00:20:19,260 --> 00:20:28,830
then select this cylindrical face of the hole on the flapping of creating the concentric made.

234
00:20:29,340 --> 00:20:30,090
Click on this.

235
00:20:30,470 --> 00:20:31,240
Finished made it.

236
00:20:33,130 --> 00:20:33,900
Next thing.

237
00:20:35,850 --> 00:20:45,440
We need to apply a coincident meet between this faith based body and this upper phase of the clapping.

238
00:20:48,900 --> 00:20:53,750
So choose the coincident option from the Standard Mates Lounge.

239
00:20:56,500 --> 00:21:02,140
Select this face of the wife's body and then

240
00:21:04,780 --> 00:21:07,590
select this upper phase of the clamping plate.

241
00:21:11,490 --> 00:21:12,140
Blame the maid.

242
00:21:12,520 --> 00:21:14,270
Click on this and finish made by.

243
00:21:18,090 --> 00:21:22,090
Now the clamping plate is at its appropriate location.

244
00:21:24,680 --> 00:21:25,740
Click on the OK button.

245
00:21:26,640 --> 00:21:34,770
The main property manager, next spot that is required to be assembled is the Scoop Board.

246
00:21:36,760 --> 00:21:38,430
Click on this insert components to look

247
00:21:41,250 --> 00:21:46,920
like the scrollbar and hit open button, they say, in the drawing area.

248
00:21:48,690 --> 00:21:59,110
Click on the make to choose the concentric option from the standard med school out next select, you

249
00:21:59,200 --> 00:22:09,460
know, based on this just group, then select the set in the coal face of a screwball.

250
00:22:11,040 --> 00:22:15,610
Click on the ad finished made button you can see.

251
00:22:17,920 --> 00:22:25,710
This crew bar can slide to and fro the home, which is on just.

252
00:22:30,390 --> 00:22:38,240
Also, if you keep on dragging it out, you can see it goes out of the up just too before we fix this

253
00:22:38,240 --> 00:22:38,630
issue.

254
00:22:40,320 --> 00:22:46,970
Notice at the Bond Globes, this stroma comments self-confidence button.

255
00:22:49,570 --> 00:22:58,240
I think the Loeb's and click on the open place Wadlow by clicking in the groin area.

256
00:23:02,370 --> 00:23:07,930
Like the Kosa or the bomb blow, right, click on it and then rotate it like this.

257
00:23:13,400 --> 00:23:26,040
They're going gonna make two shows, concentric option now select this cylindrical face of a screwball.

258
00:23:29,050 --> 00:23:32,530
And this cylindrical face of the bar bill.

259
00:23:37,840 --> 00:23:42,500
Come to add, finished made button to the coincident button

260
00:23:45,200 --> 00:23:45,570
select.

261
00:23:48,270 --> 00:23:56,940
This phase of the screw up and then select this phase after the bubblers click on the add finish made

262
00:23:56,940 --> 00:23:57,270
button.

263
00:24:00,900 --> 00:24:06,540
Now the Bob move is at the required location on this site.

264
00:24:07,480 --> 00:24:08,850
Click on the okay about.

265
00:24:12,170 --> 00:24:15,620
Selected by groups component from the feature manager.

266
00:24:17,540 --> 00:24:23,090
Control policy keys on your keypad to copy the component back in the drawing area.

267
00:24:24,020 --> 00:24:31,520
Then press control reaches the base to dampen the drinks again.

268
00:24:31,640 --> 00:24:34,620
Drag the cursor with the bar globe.

269
00:24:34,910 --> 00:24:38,660
Right, click on it and then put it like this

270
00:24:42,750 --> 00:24:54,890
back on the map to show the concentric option like this face toolbar and select the cylindrical face

271
00:24:54,890 --> 00:24:56,180
of the host on the bottom.

272
00:25:00,630 --> 00:25:06,820
It of came up, let's select the incident option and choose.

273
00:25:08,780 --> 00:25:10,970
This phase of the screw up.

274
00:25:13,990 --> 00:25:22,230
And then select this phase of the bucktooth, then hit this finish made by the.

275
00:25:24,660 --> 00:25:32,650
The bargaining looks up at the exact locations on the okay button to close the meat property manager.

276
00:25:34,410 --> 00:25:38,940
To fix this problem, let us apply a distance made between the components.

277
00:25:39,790 --> 00:25:41,030
So choose the make, too.

278
00:25:44,670 --> 00:25:46,990
And this advanced makes rollout.

279
00:25:51,560 --> 00:25:53,030
She was just dist. button here.

280
00:25:55,090 --> 00:25:56,230
I 42.

281
00:25:58,810 --> 00:25:59,900
This edit box

282
00:26:03,540 --> 00:26:04,430
now select

283
00:26:07,010 --> 00:26:09,010
this face of the bob.

284
00:26:09,190 --> 00:26:18,680
Look, what we are trying to do here is we are trying to create a distance made between this face of

285
00:26:18,680 --> 00:26:24,830
the box globe, which we selected and frankly, the whole assembly.

286
00:26:25,640 --> 00:26:28,870
So you have selected the face on the bottle.

287
00:26:29,850 --> 00:26:37,480
Now we need to select the lane which the distance of 42 two units will be counted.

288
00:26:38,240 --> 00:26:46,630
So on this feature manager design creed button and choose this, frankly, option here.

289
00:26:48,730 --> 00:26:49,520
Back on October.

290
00:26:50,670 --> 00:26:55,810
Oh, if you see, I cannot track this woman 24 anymore.

291
00:26:58,600 --> 00:26:59,170
Okay, button.

292
00:27:00,460 --> 00:27:07,630
Next, we need to add a little filibuster at this location called the subcomponents to.

293
00:27:11,000 --> 00:27:20,100
She'll just hold Celesta and then head open, but they set you up looking in the groin area, next,

294
00:27:20,100 --> 00:27:29,930
choose the mate to this concentric option, then select this in a cylindrical face of the whole of the

295
00:27:30,060 --> 00:27:38,870
West shop and select this cylindrical face off the Oval Office to click on the add finished made button.

296
00:27:39,320 --> 00:27:43,070
I'll choose coincident option and then.

297
00:27:45,470 --> 00:27:54,890
Select a face on the white chalk and make this.

298
00:27:55,950 --> 00:27:58,580
Well, face off the old Philistine.

299
00:28:01,110 --> 00:28:06,730
Look, I'm talking about debating competence of the six groups.

300
00:28:07,730 --> 00:28:09,200
Can talk about them from the mate.

301
00:28:09,440 --> 00:28:10,250
Property manager.

302
00:28:14,140 --> 00:28:16,000
Now click on the search companies to

303
00:28:20,860 --> 00:28:23,890
link the six to one on the list.

304
00:28:23,980 --> 00:28:25,130
And then it opened by.

305
00:28:28,690 --> 00:28:30,110
They sit anywhere in the drying area.

306
00:28:30,410 --> 00:28:35,800
The simple left click of a mouse, rotate this scoop like this.

307
00:28:38,450 --> 00:28:42,990
Mic on the mic to select the concentric option.

308
00:28:45,810 --> 00:28:54,220
They've this a face hole, then select this cylindrical face on the sets to

309
00:28:58,600 --> 00:29:00,160
make on the ad finish made button.

310
00:29:01,390 --> 00:29:11,800
Next, choose coincident option of the standard made stall out, select this base, then select this

311
00:29:11,800 --> 00:29:12,150
face.

312
00:29:14,980 --> 00:29:21,010
Now, here to talk about I mean, click on the okay button to get out of the main property manager.

313
00:29:25,900 --> 00:29:28,540
You need to send Stroope at this location also.

314
00:29:28,810 --> 00:29:32,770
So select the sex group from the feature manager.

315
00:29:33,550 --> 00:29:34,330
I mean copy it.

316
00:29:34,390 --> 00:29:35,480
Using control policy.

317
00:29:36,540 --> 00:29:38,040
Back in the drawing area.

318
00:29:38,440 --> 00:29:38,890
Control.

319
00:29:38,890 --> 00:29:44,160
Plus we based the copy of the set screw.

320
00:29:45,680 --> 00:29:49,420
I want to make to make the concentric option.

321
00:29:50,410 --> 00:29:55,960
Now select this face and then select this phrase.

322
00:30:00,660 --> 00:30:08,100
Combat fish made button off of the main property manager, select this company and pull it out a bit.

323
00:30:10,300 --> 00:30:12,710
I choose to make to this time.

324
00:30:13,160 --> 00:30:14,540
Select the coincident option.

325
00:30:15,810 --> 00:30:19,910
This face and then this face.

326
00:30:22,510 --> 00:30:23,960
Add and finish.

327
00:30:24,020 --> 00:30:24,830
Mute button again.

328
00:30:25,910 --> 00:30:26,520
Back on this.

329
00:30:26,610 --> 00:30:26,880
Okay.

330
00:30:26,880 --> 00:30:28,250
Button to get out of the lead.

331
00:30:28,490 --> 00:30:34,110
Well, we feel that we need these six to on these two locations.

332
00:30:35,620 --> 00:30:39,420
Having to use the mirror components tool for this.

333
00:30:40,030 --> 00:30:48,070
So we'll put this up on his bottom, dropped out and then choose this little complements to form.

334
00:30:48,300 --> 00:30:50,220
We need to specify the minute plate.

335
00:30:51,210 --> 00:30:57,720
So again, click on this feature manager design three button select, frankly, estimate up.

336
00:30:59,310 --> 00:31:02,670
Now we have to specify the component stack we want to meet up.

337
00:31:02,970 --> 00:31:05,690
So I would select this one and this one.

338
00:31:07,650 --> 00:31:07,880
Okay.

339
00:31:07,890 --> 00:31:13,650
Button and see we have the set screws on this side.

340
00:31:13,740 --> 00:31:13,920
OK.

341
00:31:14,940 --> 00:31:25,050
Now these two set screws are too many to be assembled called subcomponents to choose sifts through to

342
00:31:25,080 --> 00:31:29,420
the site and click on the open button is the component in the triangle.

343
00:31:29,420 --> 00:31:33,540
You drag the cursor over it and rotated like this.

344
00:31:39,950 --> 00:31:47,770
Back on the map to the constant click option, then select.

345
00:31:49,820 --> 00:31:59,760
This face the hole at this face of a sex group from the ad finish made by the.

346
00:32:05,110 --> 00:32:14,440
Now to the coincident option, make this face off the boat and now select this phase of the system.

347
00:32:16,380 --> 00:32:20,050
Click on the ad finish mute button on the OK button.

348
00:32:20,560 --> 00:32:28,990
Get out of the make property manager select a set, screw two from the feature manager or behaved and

349
00:32:29,000 --> 00:32:40,000
faced it integrated and follow the same procedure to assemble the sets group at its required location

350
00:32:41,360 --> 00:32:48,870
make to select the concentric option like this in a face.

351
00:32:52,690 --> 00:32:55,150
This identical face of the system.

352
00:32:58,920 --> 00:33:00,460
We're gonna add finished mute button.

353
00:33:02,140 --> 00:33:05,230
Now select the coincident option from this roll out.

354
00:33:05,710 --> 00:33:07,860
Then select this phrase.

355
00:33:10,190 --> 00:33:11,950
I think Plake and

356
00:33:15,670 --> 00:33:17,260
this phase of the subscript.

357
00:33:20,070 --> 00:33:21,710
Click on the add finished mute button.

358
00:33:22,090 --> 00:33:24,960
And then this okay button.

359
00:33:25,960 --> 00:33:27,670
Get out of the main property manager.

360
00:33:29,170 --> 00:33:32,180
And here we have this final bench twice assembled

361
00:33:36,990 --> 00:33:42,300
at the space bar on your key back in multibillion fission dialogue.

362
00:33:43,480 --> 00:33:45,800
Next, choose this isometric button.

363
00:33:48,700 --> 00:33:50,920
No, save this file to the folder.

364
00:33:51,570 --> 00:33:55,090
The individual components of this assembly are safe.

365
00:33:55,900 --> 00:33:57,160
Thank you for watching this with you.
