1
00:00:13,310 --> 00:00:15,650
Welcome to the world of computer aided design.

2
00:00:15,800 --> 00:00:17,780
Let's honor books in today's session.

3
00:00:18,170 --> 00:00:21,410
We are going to learn how to create length intolerance.

4
00:00:22,410 --> 00:00:24,000
So let me start a new find here.

5
00:00:24,780 --> 00:00:25,770
Go to the file menu.

6
00:00:26,840 --> 00:00:31,590
Shot Goodwin is displayed next, choose this new option from the shark click menu.

7
00:00:32,160 --> 00:00:35,160
You will get this new SolidWorks document, Dropbox.

8
00:00:35,770 --> 00:00:36,820
But the app chosen.

9
00:00:37,750 --> 00:00:41,350
As the but tab is chosen, so I click on this.

10
00:00:41,380 --> 00:00:41,810
Okay, but.

11
00:00:43,630 --> 00:00:48,250
Now we are into the Fox morning environment of storybooks to create lines.

12
00:00:48,370 --> 00:00:50,420
We need to enter the sketching enlightenment.

13
00:00:51,100 --> 00:00:57,440
So click on this sketch, tap in the command manager as we want to create a sketch.

14
00:00:58,240 --> 00:01:00,760
So, like on the sketch tooltip.

15
00:01:02,360 --> 00:01:09,610
As you click on this sketch to these two planes, the front plane, dopp plane and the right plane are

16
00:01:09,620 --> 00:01:11,580
temporarily displayed on the screen.

17
00:01:12,350 --> 00:01:15,410
Let's say I want to create my sketch on the top plane.

18
00:01:15,710 --> 00:01:18,460
So I was selected by clicking on the top.

19
00:01:19,190 --> 00:01:22,670
Now, V.R. into the sketching environment of SolidWorks.

20
00:01:23,030 --> 00:01:25,790
And here we have different sketching tools.

21
00:01:26,390 --> 00:01:29,990
First tool, here is the line to click on this down narrow here.

22
00:01:30,790 --> 00:01:32,360
We have two tools available here.

23
00:01:32,810 --> 00:01:35,870
First one is lying to centerline and one point line.

24
00:01:37,130 --> 00:01:39,010
So I'll click on this line to first.

25
00:01:39,710 --> 00:01:45,530
As I clicked on the line tool, you can see we have this insert line property manager displayed here.

26
00:01:46,120 --> 00:01:52,690
And this property manager has to rule out orientation and options and see in the orientation to roll

27
00:01:52,690 --> 00:01:54,510
out the assist.

28
00:01:54,830 --> 00:01:56,370
Radio button is currently chosen.

29
00:01:57,430 --> 00:02:03,220
So let me click in the drying area for the first point of the line clicked and the origin.

30
00:02:06,030 --> 00:02:12,820
As I specified, the first point of the line can see the property manager has changed to land properties.

31
00:02:14,700 --> 00:02:19,770
Now I'll click for the second point of the line in the horizontal direction and click here.

32
00:02:20,670 --> 00:02:24,080
So the line segment is created and it is a horizontal line.

33
00:02:25,240 --> 00:02:25,410
No.

34
00:02:25,750 --> 00:02:31,560
Except the line to what I do is I right, click in the drink area and select this select option.

35
00:02:32,490 --> 00:02:36,940
And this week we have created a line segment that's an open line tool.

36
00:02:36,990 --> 00:02:40,860
Again, I understand other options that are available.

37
00:02:41,140 --> 00:02:46,790
And the property manager during the orientation rule out the second option is horizontal.

38
00:02:47,180 --> 00:02:48,540
And click on this radio button.

39
00:02:49,050 --> 00:02:50,790
I mean, I clicked for the first point.

40
00:02:52,080 --> 00:02:55,350
You can see now I can only create the horizontal lines.

41
00:02:56,190 --> 00:03:00,390
I tried to move my cursor in the vertical or any other direction.

42
00:03:00,630 --> 00:03:01,410
I can't do that.

43
00:03:01,890 --> 00:03:08,490
I can only create horizontal lines because we have chosen horizontal video button in the property manager.

44
00:03:09,590 --> 00:03:11,610
And click here for the second point.

45
00:03:12,930 --> 00:03:16,940
I can see you're in the existing relations fallout out.

46
00:03:17,280 --> 00:03:20,550
One religion is added to this listbox, which is horizontal, but.

47
00:03:21,680 --> 00:03:27,980
This one also in this ad relations area, we have also in this ad relations full out.

48
00:03:28,730 --> 00:03:32,360
We have two relations available, horizontal, vertical and fix.

49
00:03:33,140 --> 00:03:34,700
Currently, the line is horizontal.

50
00:03:35,620 --> 00:03:40,330
If I tried to add this vertical relation to this land segment, let's see what happens.

51
00:03:41,170 --> 00:03:43,550
And see, we have this message displayed here.

52
00:03:43,870 --> 00:03:47,490
The sketches over define as this is a horizontal line.

53
00:03:47,750 --> 00:03:50,830
So a horizontal relation is already applied to this line.

54
00:03:50,990 --> 00:03:54,610
And we are trying to apply the vertical constraint, which is not possible.

55
00:03:56,550 --> 00:04:03,600
So I'll undo what I did just now, what I can do is I can fix this, like I can fix the location of

56
00:04:03,600 --> 00:04:04,500
this line segment.

57
00:04:05,250 --> 00:04:06,710
I'll click on this fix option here.

58
00:04:08,020 --> 00:04:11,360
And see, the fix relation is applied to this line segment.

59
00:04:11,660 --> 00:04:18,080
Also, it is added to this existing relations listbox in the options area.

60
00:04:18,380 --> 00:04:26,850
We have to checkboxes for construction and infinitely if I select this for construction checkbox in

61
00:04:26,880 --> 00:04:30,050
C, Lang has turned into a construction line.

62
00:04:31,520 --> 00:04:33,800
If I select this infinite length checkbox.

63
00:04:35,390 --> 00:04:38,880
And see, the length of the line segment has gone in finite.

64
00:04:39,190 --> 00:04:42,660
Now we cannot locate the start and end points of this line segment.

65
00:04:43,510 --> 00:04:46,440
The barometer's area, we have this angle added box.

66
00:04:46,620 --> 00:04:48,630
Currently, the value is set to zero degrees.

67
00:04:49,140 --> 00:04:51,780
If I tried to change it, let's make it 30 degrees.

68
00:04:52,290 --> 00:04:52,650
Enter.

69
00:04:52,820 --> 00:04:55,940
You can see this value changed back to zero degree.

70
00:04:56,280 --> 00:04:59,530
As the horizontal and fixed constraints are applied to this line.

71
00:05:00,510 --> 00:05:05,940
So after creating the line segment, I'm going to click on this close dialog button.

72
00:05:07,620 --> 00:05:09,910
If it's again invoked the line tool.

73
00:05:10,500 --> 00:05:12,000
So I flick on the line tool.

74
00:05:12,840 --> 00:05:18,010
Now, in this orientation rule out, you can use the vertical radio button to create a vertical Lansing.

75
00:05:19,740 --> 00:05:21,900
If you want to create line segment at an angle.

76
00:05:22,110 --> 00:05:23,740
You can choose this angle.

77
00:05:23,760 --> 00:05:24,330
Radio button.

78
00:05:25,680 --> 00:05:26,970
Click on this angle radio button.

79
00:05:28,700 --> 00:05:30,480
Here's my first point for the line segment.

80
00:05:30,870 --> 00:05:32,880
And this is the second point.

81
00:05:34,240 --> 00:05:36,680
I flick and click on this select option.

82
00:05:38,540 --> 00:05:43,450
If I click on this line, you can see currently the angle value is tallied, three point two one.

83
00:05:44,000 --> 00:05:49,130
I want to change it to 50 degrees, but I have 50 and press enter.

84
00:05:49,250 --> 00:05:55,370
You can see the angle at which the line segment was inflamed has changed to 50 degrees.

85
00:05:56,750 --> 00:05:58,790
Length of the line segment is 106.

86
00:05:58,970 --> 00:06:01,070
You can change it to say 150.

87
00:06:02,080 --> 00:06:11,310
So after creating the line segment, click on this dialogue, I think go to this dropdown list and see

88
00:06:11,720 --> 00:06:13,930
two on single line in between.

89
00:06:15,410 --> 00:06:21,210
So this time I click on the center link to this point.

90
00:06:22,180 --> 00:06:23,290
This is the second point.

91
00:06:24,210 --> 00:06:34,290
The center line is kind of a construction like can also use the line to create this same delay to disrupt

92
00:06:34,310 --> 00:06:35,230
on his midpoint.

93
00:06:36,300 --> 00:06:41,650
It's click on the speed pipeline to take to it and see the insert line.

94
00:06:41,670 --> 00:06:42,950
Property manager is the weather.

95
00:06:43,770 --> 00:06:50,470
And this time in the options rollout, the midpoint line stewpot is already sitting at this midpoint.

96
00:06:50,870 --> 00:07:01,850
I need to click on this point that the midpoint of the line segment about the person that can see this,

97
00:07:02,560 --> 00:07:11,230
the medications directions create the lines, the two, frankly, Synecdoche.

98
00:07:13,290 --> 00:07:16,970
This week have feature line, segment length and the mood.

99
00:07:18,180 --> 00:07:19,050
Thank you for watching this.