1
00:00:11,670 --> 00:00:15,780
Hello, welcome to the world of computer aided design with solid words.

2
00:00:16,730 --> 00:00:22,230
Today we are going to create a sketch for the sun and more can see on the screen.

3
00:00:22,890 --> 00:00:27,390
We have the solid model here and the front view of this model is also given here.

4
00:00:28,380 --> 00:00:29,670
We need to create this sketch.

5
00:00:30,720 --> 00:00:33,220
All the dimensions that are required to create the sketch.

6
00:00:33,430 --> 00:00:34,680
I don't give an index finger.

7
00:00:36,620 --> 00:00:42,740
Currently, we are in the pot calling in Madman, so to create a sketch, we need to enter the sketching

8
00:00:42,740 --> 00:00:45,500
environment like on the sketch too.

9
00:00:47,360 --> 00:00:49,950
And choose the frontline as a sketching.

10
00:00:51,880 --> 00:00:57,390
Before starting the sketch artist sector, snap, grit and dimensioning units.

11
00:00:59,280 --> 00:01:06,050
Nic, on this options button here will give the system option static box, go to the document properties

12
00:01:06,050 --> 00:01:09,580
stamp next, choose this grid snap option.

13
00:01:10,510 --> 00:01:13,780
Some options related to this grid snap option are displayed here.

14
00:01:15,190 --> 00:01:19,990
Select this display grid checkbox in the major, spacing it in box.

15
00:01:20,230 --> 00:01:23,380
Change the value from hundred fifty for the sketch.

16
00:01:24,570 --> 00:01:27,260
And headlines, both major changes valued at.

17
00:01:29,180 --> 00:01:32,180
Next week on this quota system snaps back.

18
00:01:33,700 --> 00:01:39,880
Make sure this great checkbox is selected and the snap, only Ingrid is displayed checkboxes unselected.

19
00:01:40,460 --> 00:01:43,750
Again, go to the document properties tap and this time.

20
00:01:43,770 --> 00:01:47,150
Choose this unit's option in the unique system area.

21
00:01:47,320 --> 00:01:51,340
Make sure M.G. is radio button is selected.

22
00:01:51,700 --> 00:01:55,910
So after setting the crib snap and units select the Occupy.

23
00:01:57,090 --> 00:01:59,750
Let's start creating the sketch to create the sketch.

24
00:01:59,780 --> 00:02:01,310
We need to know the dimensions.

25
00:02:01,880 --> 00:02:03,980
We are going to start the sketch from this point.

26
00:02:04,430 --> 00:02:08,090
We need to move 60 units in the horizontal direction to us.

27
00:02:08,090 --> 00:02:08,440
Right.

28
00:02:09,110 --> 00:02:14,770
And then 25 units in the vertical direction and walk the line, too, by clicking on it.

29
00:02:16,080 --> 00:02:18,580
Like on the origin for the first point of the light.

30
00:02:20,040 --> 00:02:27,310
Extract the cursor in horizontal direction and left click and the cursor displays sixty units and click

31
00:02:27,310 --> 00:02:27,530
here.

32
00:02:28,960 --> 00:02:32,610
It's small, 25 units in the what you call dedication.

33
00:02:34,400 --> 00:02:39,680
Now we need to move 10 units in the horizontal direction and 10 units in the downward vertical direction

34
00:02:39,830 --> 00:02:40,760
to create this, but.

35
00:02:42,080 --> 00:02:47,000
So I click here and here, the total length of the segment is 60 units.

36
00:02:47,260 --> 00:02:51,380
The radius of this office, 10 units, which means this park is 20 units.

37
00:02:51,980 --> 00:02:54,350
And these two parks are 20 units.

38
00:02:55,130 --> 00:03:00,000
So we need to move 10 units along negative extrication.

39
00:03:00,140 --> 00:03:06,440
With respect to this point, and the next stock is 10 units in radius, 10 units to the left.

40
00:03:07,270 --> 00:03:10,970
Now to create this arc that goes away from this point.

41
00:03:11,510 --> 00:03:15,710
And then again, get back to this point, Frank, that goes in downward direction.

42
00:03:16,420 --> 00:03:17,740
The line will change into an arc.

43
00:03:18,710 --> 00:03:21,080
You can see the current 3-D value is 10.

44
00:03:21,530 --> 00:03:22,880
And the angle is 180 degrees.

45
00:03:23,180 --> 00:03:24,350
So I will click here.

46
00:03:25,120 --> 00:03:28,480
And this way, we have created an arc of really stand units.

47
00:03:29,060 --> 00:03:36,260
I mean, I need to move 10 units in the horizontal direction, so I'll click here and units in the vertical

48
00:03:36,260 --> 00:03:36,800
direction.

49
00:03:37,150 --> 00:03:37,620
I'll here.

50
00:03:38,450 --> 00:03:41,570
10 units again in the horizontal direction and flick here.

51
00:03:42,080 --> 00:03:48,050
And then I'll close the sketch by clicking as the origin after creating the sketch.

52
00:03:48,200 --> 00:03:48,410
Right.

53
00:03:48,410 --> 00:03:52,160
Click in the drawing area and choose the select option in this way.

54
00:03:52,340 --> 00:03:54,350
We have created a sketch for the solid model.

55
00:03:55,160 --> 00:03:56,520
Thank you for watching this review.