1
00:00:11,520 --> 00:00:15,550
Hello, welcome to the world of computer aided design with solid votes.

2
00:00:16,220 --> 00:00:22,400
In today's session, we are going to create front view for a solid model can see on the screen.

3
00:00:22,790 --> 00:00:23,880
Here we have this model.

4
00:00:24,200 --> 00:00:25,260
And here is the front view.

5
00:00:26,300 --> 00:00:27,550
We need to create this sketch.

6
00:00:28,520 --> 00:00:31,250
All the dimensions that are required to create the sketch.

7
00:00:31,550 --> 00:00:32,120
I'm giving him.

8
00:00:33,670 --> 00:00:39,790
Before we start creating the sketch, let's set up SNAP, create and document units first.

9
00:00:40,650 --> 00:00:43,090
So click on this options button here in the menu bar.

10
00:00:43,920 --> 00:00:45,920
You'll get this system option Tatopoulos.

11
00:00:47,470 --> 00:00:49,060
Choose the document properties tab.

12
00:00:50,300 --> 00:00:52,640
And next, choose this grid snap option.

13
00:00:53,220 --> 00:00:56,750
All the same options related to this grid snap are displayed here.

14
00:00:57,800 --> 00:00:59,590
Select this display grid checkbox.

15
00:01:00,450 --> 00:01:09,470
Change the major grid spacing to 50 units and my deadlines per major to that next click on this go to

16
00:01:09,470 --> 00:01:10,190
System Snapp's.

17
00:01:10,190 --> 00:01:17,600
But make sure this grid checkbox is selected here and snap only when crude is displayed, checkbox is

18
00:01:17,600 --> 00:01:18,320
unselected.

19
00:01:19,120 --> 00:01:23,510
Go to the document properties tab again and this time choose the units option.

20
00:01:24,410 --> 00:01:31,460
Make sure LMG is selected as the current unit system after making all the changes in the style box.

21
00:01:31,760 --> 00:01:32,610
Click on the October.

22
00:01:34,310 --> 00:01:40,340
Currently, we are in the park modeling environment, so to create this sketch, we need to enter sketching

23
00:01:40,340 --> 00:01:40,760
in laminate.

24
00:01:42,190 --> 00:01:46,720
Click on the sketch to choose the front plate as the sketching playing.

25
00:01:47,960 --> 00:01:51,260
Let's have a look at the sketch that we have to create.

26
00:01:52,330 --> 00:01:54,730
We'll start creating the sketch from this point.

27
00:01:55,730 --> 00:02:03,260
So we need to move 150 units into positive horizontal direction and then 40 units in the vertical direction.

28
00:02:04,390 --> 00:02:06,490
Invoked the line two by clicking on it.

29
00:02:07,280 --> 00:02:11,210
Back at the Origin to specify it as the first point of the lines in.

30
00:02:12,960 --> 00:02:17,390
Extract the coaster in the horizontal direction till you get a value of 150.

31
00:02:18,280 --> 00:02:18,740
The cap.

32
00:02:19,520 --> 00:02:22,460
Next, we need to move 40 units in the vertical direction.

33
00:02:23,090 --> 00:02:26,810
So this is the point, which is at a distance of 40 units from the previous point.

34
00:02:26,910 --> 00:02:27,420
And click here.

35
00:02:29,440 --> 00:02:33,820
Next, we need to create a semicircle with a radius of two units.

36
00:02:35,680 --> 00:02:40,750
So move the cursor away from the previous point and then get it back to that point.

37
00:02:41,350 --> 00:02:42,940
Language change in Denmark.

38
00:02:45,550 --> 00:02:47,920
And see the country at its values, thirty two point five.

39
00:02:48,370 --> 00:02:50,260
We need to change it to 30 units.

40
00:02:52,670 --> 00:02:56,690
So when you achieve the release value of TUTTY units, just click at that point.

41
00:02:58,590 --> 00:03:01,620
Next thing we need to create this line segment.

42
00:03:03,370 --> 00:03:09,130
And it's linked value, as you can see, the total value of this line segment is 40 units.

43
00:03:10,240 --> 00:03:11,450
And this value straight to you.

44
00:03:11,530 --> 00:03:11,910
It's.

45
00:03:12,860 --> 00:03:16,550
So this length value will be 40, minus 20.

46
00:03:17,090 --> 00:03:18,200
That is 20 units.

47
00:03:18,830 --> 00:03:20,920
So create a particular line of length.

48
00:03:21,020 --> 00:03:21,860
Two units.

49
00:03:22,910 --> 00:03:25,430
Now we need to calculate the length of this line segment.

50
00:03:26,600 --> 00:03:27,880
Total values, 150.

51
00:03:28,680 --> 00:03:29,350
That is terrifying.

52
00:03:29,520 --> 00:03:30,160
Twenty five.

53
00:03:30,980 --> 00:03:33,530
And 60 is the diameter of this circle.

54
00:03:34,660 --> 00:03:37,570
Sixty is twenty five plus twenty five.

55
00:03:38,300 --> 00:03:39,900
Total comes out to be 120.

56
00:03:40,010 --> 00:03:41,760
So this value is to years.

57
00:03:42,380 --> 00:03:48,170
So we have to move categories in the horizontal direction, then 20 minus 15 fire units in the downward

58
00:03:48,170 --> 00:03:51,380
direction and twenty five units again in the horizontal direction.

59
00:03:52,000 --> 00:03:54,800
So thirty five and twenty five.

60
00:03:58,420 --> 00:03:59,660
It's in the downward direction.

61
00:04:00,240 --> 00:04:02,960
Thirty five units in the horizontal direction.

62
00:04:03,460 --> 00:04:04,670
I can find units.

63
00:04:06,030 --> 00:04:11,760
The radical direction for 35 units sucking in the horizontal direction and then I am going to close

64
00:04:11,760 --> 00:04:14,470
this sketch by clicking at the Origin.

65
00:04:15,690 --> 00:04:18,240
So we have created the outer boundary of the sketch.

66
00:04:19,140 --> 00:04:23,720
Next thing that we need to do is we need to create this circular hole.

67
00:04:25,310 --> 00:04:27,200
Just having an army drove up to units.

68
00:04:28,360 --> 00:04:32,650
Get out of the line to right click in the groin area and choose the select option.

69
00:04:34,440 --> 00:04:35,650
We need to create a circle.

70
00:04:36,690 --> 00:04:39,930
So I will invoke the center to by clicking like.

71
00:04:40,990 --> 00:04:42,640
This is a center point for the circle.

72
00:04:45,380 --> 00:04:50,090
And as the diameter of the circle is 20 units, so the radius value will be 50.

73
00:04:50,530 --> 00:04:51,380
So I'll click here.

74
00:04:51,770 --> 00:04:55,640
You can see the radius values displayed as 50 on the screen.

75
00:04:58,640 --> 00:05:01,320
Erratic in the drying area and choose the select option.

76
00:05:02,280 --> 00:05:05,220
In this way, we have created the front view for the model.

77
00:05:06,300 --> 00:05:07,470
Thank you for watching this review.