1
00:00:16,420 --> 00:00:20,590
Hello, welcome to the world of computer aided design with solid votes.

2
00:00:21,220 --> 00:00:25,840
Today, we are going to learn how to apply angular dimensions to different entities.

3
00:00:26,930 --> 00:00:30,440
To play angular dimensions, we have this small dimension to.

4
00:00:31,620 --> 00:00:35,940
Suppose I want to lay some angle value between these two line segments.

5
00:00:36,450 --> 00:00:40,500
What I do is I go to this my dimension to once it is activated.

6
00:00:40,620 --> 00:00:43,640
I would click on this line segment and this line segment.

7
00:00:44,370 --> 00:00:46,860
You can see angle values attached to the course.

8
00:00:47,460 --> 00:00:50,550
Next, we have to place this damage in place of care.

9
00:00:51,420 --> 00:00:52,730
Inside placed a dimension.

10
00:00:53,020 --> 00:00:54,930
A modified dialog box is displayed.

11
00:00:56,700 --> 00:00:59,110
Can change the anger value using this educable.

12
00:00:59,610 --> 00:01:03,990
Suppose you want to change and give value to 60 degrees like 60 and press enter.

13
00:01:04,730 --> 00:01:10,050
You can see the angle between two lines has increased from 45 to 60.

14
00:01:11,070 --> 00:01:13,930
After creating the angular dimension, click on this close dial.

15
00:01:15,690 --> 00:01:23,700
We can also place the angular dimension between three points to add angular dimensions between three

16
00:01:23,700 --> 00:01:24,270
points.

17
00:01:24,360 --> 00:01:30,920
You need to be extremely careful when selecting points because the small time engine to next select

18
00:01:30,930 --> 00:01:33,020
the first point by using the left mouse.

19
00:01:33,110 --> 00:01:35,360
But click on this point.

20
00:01:36,270 --> 00:01:38,350
Now this point becomes the angle.

21
00:01:38,470 --> 00:01:40,840
What explains next?

22
00:01:40,950 --> 00:01:48,840
I would select this point and then I'll select this, but can see the angle values attached to the cursor.

23
00:01:49,980 --> 00:01:53,760
Next thing I need to do is I need to place it and track my close up.

24
00:01:54,600 --> 00:01:55,560
I can place the angle.

25
00:01:55,560 --> 00:01:59,190
Value on the other side was like this.

26
00:02:01,090 --> 00:02:05,760
And place a King James angle value to sixty five and recentre.

27
00:02:07,330 --> 00:02:12,630
Next, I click on this fills that we can also add angular dimensions to an.

28
00:02:13,590 --> 00:02:17,580
So we move this one dimension to click for the first point.

29
00:02:18,300 --> 00:02:22,670
Second point and third place, the angular red.

30
00:02:25,540 --> 00:02:27,940
James Angleton, one cranky and percenter.

31
00:02:29,950 --> 00:02:30,870
Exactly, contest closed.

32
00:02:31,000 --> 00:02:33,390
I don't want to get out of this my damage two.

33
00:02:34,220 --> 00:02:39,400
So this is how we apply angular dimensions to different kest entities and solar.

34
00:02:40,520 --> 00:02:41,680
Thank you for watching this with you.