1
00:00:18,360 --> 00:00:18,610
Hello.

2
00:00:19,430 --> 00:00:22,430
Welcome to the world of computer aided design with certain books.

3
00:00:22,820 --> 00:00:30,050
Today we are going to learn how to apply linear diameter dimensioning to sketches and solid votes.

4
00:00:30,650 --> 00:00:32,660
You can see I have a model created here.

5
00:00:33,470 --> 00:00:34,550
It is a reward model.

6
00:00:35,150 --> 00:00:38,630
And if I go to the sketch of this model from the design create.

7
00:00:40,630 --> 00:00:41,920
Double-Click on the sketch.

8
00:00:42,590 --> 00:00:45,030
A double clicking on the sketch from the design tree.

9
00:00:45,250 --> 00:00:47,390
Now we add into the stitching enlightenment.

10
00:00:48,090 --> 00:00:51,980
Now I need to orient the sketch to the screen.

11
00:00:52,280 --> 00:00:55,690
So what I don't do is put the baseball on my cable.

12
00:00:56,710 --> 00:00:59,250
You have this orientation, Wuxia.

13
00:01:01,350 --> 00:01:05,420
Excited flick on this normally two button here and see.

14
00:01:05,490 --> 00:01:10,580
This is the sketch for today will feature the one which is displayed in blue color.

15
00:01:11,760 --> 00:01:14,310
You can see the more on the front face.

16
00:01:14,400 --> 00:01:18,600
Is it Succot where I need to do this?

17
00:01:18,720 --> 00:01:21,460
I need to apply a diameter dimension for this sucker.

18
00:01:22,710 --> 00:01:27,700
So what I do is I go to the sketch, come on, manager, and then all this might damage.

19
00:01:29,310 --> 00:01:37,970
Out, I will click on this line segment and then I'll click on this scintillate, you can see the damage

20
00:01:37,980 --> 00:01:39,350
and values attached to the goes up.

21
00:01:41,150 --> 00:01:45,160
Damage in value is 500 units, which is the diameter flip a circle.

22
00:01:46,580 --> 00:01:54,380
This damage and value displayed as diameter and the cursor is below the center light and drag the cursor

23
00:01:54,470 --> 00:01:55,400
about the center length.

24
00:01:55,670 --> 00:01:58,310
You can see the damage and value has reduced to.

25
00:02:00,110 --> 00:02:03,230
But I do it's like a drag because I'm below the center line.

26
00:02:03,320 --> 00:02:04,770
And then at least it's damage.

27
00:02:07,270 --> 00:02:11,290
So now this dimension represents that it is a diameter dimension.

28
00:02:12,720 --> 00:02:15,430
And this sketch is going to be sketch for that.

29
00:02:15,440 --> 00:02:19,340
We want feature creating the linear diameter dimension.

30
00:02:19,580 --> 00:02:21,860
Macondo was the button.

31
00:02:22,040 --> 00:02:23,630
Get out of the smart dimension.

32
00:02:25,970 --> 00:02:30,340
This is how we apply linear diameter dimensions to sketches in 200 first.

33
00:02:30,830 --> 00:02:31,840
Thank you for watching this week.