1
00:00:09,910 --> 00:00:14,580
Welcome to the world of Computer-Aided Design that sort of puts today's session.

2
00:00:14,770 --> 00:00:19,890
We are going to learn how to apply ordinate dimensions to sketches in solid SonicWALL.

3
00:00:21,070 --> 00:00:27,490
I've discussed Ron on the street, and I would like new dimensions to bring new dimensions.

4
00:00:27,590 --> 00:00:33,740
I used to dimension a sketch with respect to a specified data building on the requirement of the design.

5
00:00:34,270 --> 00:00:37,130
It can be an entity in the sketch on the origin.

6
00:00:38,530 --> 00:00:41,750
Ordinate dimensions are of two types, horizontal and vertical.

7
00:00:43,560 --> 00:00:47,990
Now let us discuss the methods of creating these types of ordinate dimensions.

8
00:00:49,440 --> 00:00:56,240
Mr. Ford will apply horizontal ordinate dimensions to this horizontal ordinate dimensions are used to

9
00:00:56,240 --> 00:01:02,160
damage in the horizontal distances of selected entities from the specified data.

10
00:01:03,760 --> 00:01:05,480
It's called the Smart Dimensioned Dropped Out.

11
00:01:06,080 --> 00:01:10,940
We have this horizontal ordinated dimension to click on it.

12
00:01:11,780 --> 00:01:15,590
Once I click on this tool, you can see we are prompted to select an edge.

13
00:01:15,620 --> 00:01:16,160
What makes?

14
00:01:17,570 --> 00:01:18,520
And then it takes Lukash.

15
00:01:19,460 --> 00:01:22,600
So I will slip this edge off to sketch out the data.

16
00:01:29,830 --> 00:01:32,500
Can see zero values attached to the Gosa.

17
00:01:33,200 --> 00:01:39,520
And next, I have to place it and click here to place this value.

18
00:01:42,810 --> 00:01:49,190
After placing this value I mentioned, property manager is also involved here after placing his first

19
00:01:49,190 --> 00:01:53,710
I mentioned, we are prompted again to select an edge 16 and then a fixed location.

20
00:01:54,160 --> 00:01:56,060
So I'll click on this edge.

21
00:01:58,040 --> 00:02:00,230
This edge and this edge.

22
00:02:02,310 --> 00:02:03,480
This is the reference age.

23
00:02:03,570 --> 00:02:05,270
So it is Mark Asiel.

24
00:02:06,970 --> 00:02:12,360
Distance between this age in this age is twenty five years between this edge and this edge is 50.

25
00:02:13,000 --> 00:02:17,290
And between this edge and this edge is a hundred years.

26
00:02:17,890 --> 00:02:26,340
So all the distances are measured with reference to this image creating the horizontal alternate dimensions.

27
00:02:26,760 --> 00:02:28,240
Click on this close dialogue button.

28
00:02:28,780 --> 00:02:29,500
Get out of the.

29
00:02:31,890 --> 00:02:38,700
Similarly, we can apply the medical ordinate dimensions to dismantle damage and drop down and choose

30
00:02:38,700 --> 00:02:40,210
this particular ordinate damage.

31
00:02:41,520 --> 00:02:45,610
This time I'm going to choose this edge at the daytime offense.

32
00:02:46,350 --> 00:02:48,840
Click on it and place this zero damage.

33
00:02:48,860 --> 00:02:52,410
And next, I'll click on this Etch a Sketch.

34
00:02:52,680 --> 00:02:57,510
And this is creating the vertical ordinate dimensions.

35
00:02:58,290 --> 00:03:00,530
Where did this close diatom button get out of the.

36
00:03:03,070 --> 00:03:07,370
This is how we apply horizontal and vertical ordinate dimensions.

37
00:03:07,460 --> 00:03:09,180
This sketch in solid votes.

38
00:03:09,670 --> 00:03:10,680
Thank you for watching this week.