1 00:00:10,480 --> 00:00:13,600 Hello, welcome to the world of computer aided design. 2 00:00:14,280 --> 00:00:16,070 What's your decision? 3 00:00:16,650 --> 00:00:24,640 Yeah, going to create this sketch, creating the sketch you are going to add that is quiet relations 4 00:00:24,670 --> 00:00:26,680 and dimensions to this sketch. 5 00:00:27,910 --> 00:00:30,340 So let us stop this sketch. 6 00:00:30,450 --> 00:00:36,940 First of all, we'll create two sections, one with the radius value 163, other with the radius value. 7 00:00:36,970 --> 00:00:42,050 One seven of these circles will be sharing the same center point. 8 00:00:42,490 --> 00:00:49,120 So click on the circle to split any in the drawing area to specify the center point for. 9 00:00:51,490 --> 00:00:53,440 Going click anywhere in the drying area. 10 00:00:54,660 --> 00:01:01,950 Specify the radius value as you click to specify the radius value circle property manager, it's active 11 00:01:01,950 --> 00:01:02,320 it. 12 00:01:04,790 --> 00:01:08,720 This changed the radius value to 163. 13 00:01:08,960 --> 00:01:09,480 Using that. 14 00:01:11,730 --> 00:01:12,810 Click on this button. 15 00:01:15,310 --> 00:01:16,990 Again, choose to so-called to. 16 00:01:18,830 --> 00:01:21,260 Gap, the centerpoint of the previously created circle. 17 00:01:23,360 --> 00:01:26,420 Specify Gadhafi's center point for the other Sokol's. 18 00:01:27,350 --> 00:01:32,580 In clicking the drawing area changed the radius value to 170. 19 00:01:35,350 --> 00:01:40,630 Because the key button, you can notice that this sketch is the sketch. 20 00:01:40,720 --> 00:01:41,770 Four hundred vote margin. 21 00:01:42,550 --> 00:01:45,910 So we need to create the scintillate Nick on the line, too. 22 00:01:46,810 --> 00:01:52,000 Next on the top quadrant of a circle specified, it does the first point of the line segment. 23 00:01:52,650 --> 00:01:56,790 Click at the bottom part and specify it at the end point of the line. 24 00:01:58,630 --> 00:01:58,840 Right. 25 00:01:58,840 --> 00:02:01,080 Click on the drawing area and choose to select option. 26 00:02:03,330 --> 00:02:06,430 Now we want this line segment to act as a center line. 27 00:02:06,820 --> 00:02:07,680 So click on it. 28 00:02:09,400 --> 00:02:16,450 Nine properties property manager has displayed the options to allow select this for Construction Checkbook's. 29 00:02:17,990 --> 00:02:18,660 And hit talk. 30 00:02:19,920 --> 00:02:22,320 Can see the line has changed into a construction line. 31 00:02:23,930 --> 00:02:28,880 Next, we need to offset this scintillate and this dedication to create the spot. 32 00:02:31,710 --> 00:02:38,790 Diskettes, you can see the distance between the center line and this line segment is it is six divided 33 00:02:38,790 --> 00:02:43,000 by two units, which is to three years plus tofile. 34 00:02:43,650 --> 00:02:50,940 I'm an officer of the center line in the right side with an offset value of forty three units. 35 00:02:51,660 --> 00:02:56,820 So like on the offset entities to jinx the offset value for a three. 36 00:03:00,030 --> 00:03:01,350 Next, click on the center line. 37 00:03:03,820 --> 00:03:08,990 We don't want the line to be off centered in this direction, so I will click on this list checkbox. 38 00:03:10,620 --> 00:03:11,580 Everything looks fine. 39 00:03:12,150 --> 00:03:13,140 I click on this document. 40 00:03:15,690 --> 00:03:23,460 Now, the distance between this line segment and this one is seven units, MUSKETT units, just fifteen 41 00:03:23,460 --> 00:03:25,780 units in the game. 42 00:03:27,650 --> 00:03:33,340 They come to offset entities to this time, I'll change the satellite into 15 years. 43 00:03:35,720 --> 00:03:41,630 Think this line segment and again, select the US checkbox and choose to occupy it. 44 00:03:46,550 --> 00:03:49,160 And see damage and values that are dashed. 45 00:03:51,770 --> 00:03:57,910 Sketcher, let us trim the unwanted part on the preventatives to. 46 00:03:59,240 --> 00:04:00,980 And from this Bible to sketch. 47 00:04:02,130 --> 00:04:11,770 The sport is fucked and this fucked up area, this Dysport. 48 00:04:22,930 --> 00:04:23,850 Click on the button. 49 00:04:24,870 --> 00:04:28,260 Next thing we need to do is we need to create these groups. 50 00:04:33,570 --> 00:04:40,810 First of all, I don't believe this line selected and hit the delete key on your keypad or the length 51 00:04:40,810 --> 00:04:42,280 of this tropical segment is. 52 00:04:44,700 --> 00:04:51,290 Hundred minus ninety units, but just 10 units of before creating this line segment. 53 00:04:51,830 --> 00:04:54,410 I'm going to fix the location of this point. 54 00:04:54,440 --> 00:04:59,210 And despite recent whored, the control keys on your key back. 55 00:04:59,590 --> 00:05:01,850 I think this point and this point. 56 00:05:04,600 --> 00:05:09,840 Properties, property managers, and would choose the fix option from the ad relations for. 57 00:05:12,560 --> 00:05:13,880 Next, click on the Okimoto. 58 00:05:15,320 --> 00:05:23,190 Now to the line to get this point specified as the first end point of the line segment excreted what 59 00:05:23,190 --> 00:05:31,130 they call line segment by clicking what to go down with that click, clicking the drawing, getting 60 00:05:31,130 --> 00:05:38,630 out to the select option next to the small dimension to select this line signal change the length of 61 00:05:38,630 --> 00:05:39,960 any top ten in fist enter. 62 00:05:41,100 --> 00:05:46,790 Now we need to create these groups one, two, three and four. 63 00:05:47,230 --> 00:05:48,500 These clues are Fortnum. 64 00:05:49,850 --> 00:05:50,910 Selling the line to. 65 00:05:56,390 --> 00:05:57,200 Plus point. 66 00:06:01,950 --> 00:06:06,550 Keep on sketching the groups like this. 67 00:06:24,980 --> 00:06:32,780 Now, actually in the drying area and to the synecdoche, the spot dimension to seeing the sketch. 68 00:06:36,210 --> 00:06:43,290 The length of this part of the crew is five minutes in length of this, what we call segment is also 69 00:06:43,290 --> 00:06:44,040 five minutes. 70 00:06:49,300 --> 00:06:55,420 So after choosing the spot damage to look on this segment and face the damage and then change it to 71 00:06:55,420 --> 00:06:56,110 five units. 72 00:06:58,640 --> 00:07:00,490 It's click on this what they call segment. 73 00:07:06,500 --> 00:07:09,140 Again, changed the length value to five minutes. 74 00:07:11,820 --> 00:07:18,370 Going to talk about it now, we need to make the length of all the parties on ON2 and reticle segments 75 00:07:18,670 --> 00:07:19,640 equal to fighters. 76 00:07:20,500 --> 00:07:23,250 So again, Chris, hold the control key on your keyboard. 77 00:07:24,120 --> 00:07:25,510 Link this line segment. 78 00:07:26,350 --> 00:07:26,910 This one. 79 00:07:27,610 --> 00:07:28,060 This one. 80 00:07:28,720 --> 00:07:29,170 This one. 81 00:07:30,010 --> 00:07:30,430 This one. 82 00:07:32,010 --> 00:07:33,890 Not lastly. 83 00:07:33,910 --> 00:07:34,240 This one. 84 00:07:37,970 --> 00:07:44,730 The properties property manager under the add relation to rule out juice, this EqualLogic. 85 00:07:48,620 --> 00:07:51,660 All the horizontal line segments have changed the length. 86 00:07:52,350 --> 00:07:53,960 You click this one in just five. 87 00:07:58,200 --> 00:08:03,820 Blandly select all the vertical line segments missing, including the control of key. 88 00:08:12,530 --> 00:08:14,260 Choose DayQuil off. 89 00:08:19,360 --> 00:08:22,670 You Pacific facilities, what do the lines like this one. 90 00:08:23,330 --> 00:08:23,760 This one. 91 00:08:24,170 --> 00:08:24,640 This one. 92 00:08:25,100 --> 00:08:25,580 And this one. 93 00:08:26,880 --> 00:08:27,980 Eight to DayQuil. 94 00:08:30,180 --> 00:08:34,580 Now we need to create this line, segment length of this line segment will be. 95 00:08:36,570 --> 00:08:40,670 Don't distance from this point that this is under units. 96 00:08:41,360 --> 00:08:42,440 This one is 10 units. 97 00:08:42,970 --> 00:08:43,350 Fifteen. 98 00:08:43,530 --> 00:08:43,910 Twenty. 99 00:08:44,020 --> 00:08:44,610 Twenty five. 100 00:08:45,030 --> 00:08:45,410 Thirty. 101 00:08:45,830 --> 00:08:46,400 Thirty five. 102 00:08:46,760 --> 00:08:48,290 Forty and forty five minutes. 103 00:08:48,950 --> 00:08:51,620 So this line segment will be length. 104 00:08:52,040 --> 00:08:54,950 Hundred and forty five minutes, which is fifty five units. 105 00:08:56,560 --> 00:08:58,750 So I would again create a line segment. 106 00:09:02,730 --> 00:09:05,680 The line to be clear on the first point. 107 00:09:07,930 --> 00:09:16,480 Guinevere specified the end point of the scene, play into the select option, into the small dimension 108 00:09:16,480 --> 00:09:16,810 to. 109 00:09:19,640 --> 00:09:21,040 James, the damage in Vanuatu. 110 00:09:21,400 --> 00:09:22,550 Fifty five years. 111 00:09:25,170 --> 00:09:27,520 Now we need to create this horizontal line segment. 112 00:09:28,250 --> 00:09:33,600 Let me just eight units in length is on the line segment of eight units in length. 113 00:09:33,810 --> 00:09:36,520 Then in what they call line segment, we're just putting units in. 114 00:09:38,960 --> 00:09:50,640 Click on the link to the start point and the horizontal line segment could take a magazine to the spot 115 00:09:50,640 --> 00:09:55,000 dimension to this line segment and change the damage menu to keep. 116 00:09:58,730 --> 00:10:01,530 This line segment changed the dimension of an. 117 00:10:02,690 --> 00:10:05,870 This entered into the line to. 118 00:10:07,830 --> 00:10:10,530 Here for the first point and then close to stage. 119 00:10:16,190 --> 00:10:20,210 I think in the drying area and then choose the select option, get out of the line. 120 00:10:21,850 --> 00:10:23,680 Next, we need to trim unwanted pork. 121 00:10:24,850 --> 00:10:28,900 Click on the stream entities to trim this part of the night. 122 00:10:31,050 --> 00:10:35,110 And this week we have created a sketch for a solid two or more.