1 00:00:10,940 --> 00:00:14,150 Hello, welcome to the world of computer aided design with solid. 2 00:00:14,450 --> 00:00:20,610 In today's session, we are going to learn how to create remote features and solid votes to create remote 3 00:00:20,630 --> 00:00:21,170 features. 4 00:00:21,380 --> 00:00:25,660 We have this report was placed feature two available in the features. 5 00:00:25,670 --> 00:00:26,450 Come on, manager. 6 00:00:26,630 --> 00:00:29,090 First of all, we need to have a sketch on. 7 00:00:29,090 --> 00:00:35,300 In other words, we can see we need to have a cross-section of the revised model that can be used to 8 00:00:35,300 --> 00:00:37,610 create a revolt feature or do the sketch. 9 00:00:37,640 --> 00:00:40,610 Come on, manager, and choose this button here. 10 00:00:41,580 --> 00:00:41,890 Explain. 11 00:00:42,020 --> 00:00:48,210 We need to do is we need to select the play on which we want to create the sketch and choose this front 12 00:00:48,210 --> 00:00:48,420 plate. 13 00:00:48,650 --> 00:00:51,890 Now we are in the sketching and laminate retrieval features. 14 00:00:51,920 --> 00:00:56,300 We need to have a central axis about which we want to reveal the cross section. 15 00:00:56,540 --> 00:01:02,630 So first of all, I will create a central axis by using the line to use this one construction checkbox 16 00:01:02,630 --> 00:01:02,850 here. 17 00:01:03,220 --> 00:01:04,460 Create a center line here. 18 00:01:04,860 --> 00:01:05,000 Right. 19 00:01:05,000 --> 00:01:05,990 Click in the drawing area. 20 00:01:06,020 --> 00:01:08,180 Choose the select option to get out of the line. 21 00:01:09,050 --> 00:01:14,240 Now, let's say I want to create a cylinder which is having a hole at its center. 22 00:01:14,510 --> 00:01:18,650 So I would choose the rectangle to choose this corner rectangle option. 23 00:01:19,130 --> 00:01:21,650 And I will create a cross section here like this. 24 00:01:22,220 --> 00:01:23,180 This is the center line. 25 00:01:23,210 --> 00:01:24,470 And this is the cross section. 26 00:01:24,770 --> 00:01:30,470 Distance between the center line and this edge will be taken as the radius of the hole. 27 00:01:30,710 --> 00:01:35,340 So after creating the rectangle, click on this close dialog, button it out of the rectangle. 28 00:01:35,870 --> 00:01:38,170 Now we have a cross section and a center line here. 29 00:01:38,820 --> 00:01:42,890 And click on this exit sketch button to exit the sketching environment. 30 00:01:43,270 --> 00:01:46,850 I'll go to the features, the mine manager and choose this. 31 00:01:47,060 --> 00:01:48,870 We want cost base, too. 32 00:01:49,730 --> 00:01:52,880 Once you click on this to that, you want property managers and mode. 33 00:01:53,260 --> 00:01:55,850 Now we need to select the sketch that we want to Devall. 34 00:01:57,410 --> 00:02:01,710 And see automatically a preview of one feature is displayed here. 35 00:02:02,350 --> 00:02:06,540 The axis of revolution is Langlands guess to which is the center line. 36 00:02:07,130 --> 00:02:08,290 The direction one rollout. 37 00:02:08,570 --> 00:02:16,090 We have this dropdown list, which has two options, similar to ones which we sign extruding plus base 38 00:02:16,180 --> 00:02:16,540 two. 39 00:02:16,670 --> 00:02:19,640 You can also change the angle of rotation using this edit box. 40 00:02:20,390 --> 00:02:24,320 You do not want the section to do all a complete 360 degree angle. 41 00:02:24,470 --> 00:02:25,550 You can change it from here. 42 00:02:25,940 --> 00:02:28,900 Suppose I change this value to 300 degrees. 43 00:02:28,990 --> 00:02:33,110 The center can see the sketch has made at evolution of 300 degrees. 44 00:02:33,710 --> 00:02:37,400 Activate distraction to roll out by clicking on this checkbox. 45 00:02:37,640 --> 00:02:40,880 Now suppose I want to complete the rotation 360 degrees. 46 00:02:41,030 --> 00:02:48,140 So indirection one we specify angle is three hundred degrees in the action to specify the angle at 60 47 00:02:48,140 --> 00:02:50,410 degrees and press enter. 48 00:02:50,860 --> 00:02:57,180 So the remaining 60 degrees were completed by adding the angle value in this direction to roll out. 49 00:02:57,470 --> 00:03:03,250 We can also do all the time features open sketches using this feature roll out. 50 00:03:03,510 --> 00:03:11,180 The options in feature allowed a very much similar to the ones that we saw extruded was based to check 51 00:03:11,180 --> 00:03:16,490 this thin feature checkbox after adding all the pad meters to the reward. 52 00:03:16,520 --> 00:03:19,370 Property manager click on the OK button. 53 00:03:19,730 --> 00:03:21,500 And here we have the reward feature. 54 00:03:21,740 --> 00:03:23,050 Thank you for watching this video.