1
00:00:11,420 --> 00:00:15,680
Hello, welcome to the world of computer aided design with solid words.

2
00:00:16,270 --> 00:00:19,320
Today, we are going to learn how to create the reward.

3
00:00:19,370 --> 00:00:22,410
Cuts in Södertälje create reward cuts.

4
00:00:22,550 --> 00:00:26,720
We have this reward cut to available in the features command manager.

5
00:00:28,020 --> 00:00:29,210
Created equal cut.

6
00:00:29,380 --> 00:00:35,830
We need to have a sketch that will be used as a reference for creating the cut can see.

7
00:00:35,860 --> 00:00:39,460
Currently, we have no sketch created on any face of the model.

8
00:00:40,150 --> 00:00:42,980
So what I would do is I would still choose this.

9
00:00:43,000 --> 00:00:43,770
We want to cut, too.

10
00:00:44,920 --> 00:00:49,540
You can see we need to select a plane or plane, a face on which will create the sketch.

11
00:00:49,660 --> 00:00:51,940
For that, we want our generation.

12
00:00:52,070 --> 00:00:53,560
So I would select this face.

13
00:00:53,930 --> 00:00:59,680
Now we are automatically into the sketching environment of solid create a rectangle here on the top

14
00:00:59,680 --> 00:01:00,430
face.

15
00:01:02,660 --> 00:01:05,580
Now, select the okay button again.

16
00:01:05,870 --> 00:01:07,300
Choose this active sketch button.

17
00:01:08,060 --> 00:01:10,610
And we are back to this country, one property manager.

18
00:01:11,130 --> 00:01:13,910
Now we need to select the axis of revolution.

19
00:01:14,370 --> 00:01:15,590
But this country won't feature.

20
00:01:15,860 --> 00:01:21,740
So I'm going to use this edge of the sketch as the axis of revolution.

21
00:01:22,560 --> 00:01:25,980
Also, we have this angle and first detection.

22
00:01:26,140 --> 00:01:29,690
It is equal to 360 degrees here, which is OK for me.

23
00:01:30,290 --> 00:01:32,510
So let's hit the okay button.

24
00:01:38,500 --> 00:01:44,190
In this way, we have created a country will feature here, which is also listed in the feature design

25
00:01:44,190 --> 00:01:44,490
tree.

26
00:01:46,660 --> 00:01:47,980
I'll undo what I just did.

27
00:01:49,570 --> 00:01:56,160
And they need to sketch also and let's create a plane which lights at the middle of this phase and the

28
00:01:56,160 --> 00:01:56,880
bottom phase.

29
00:01:57,710 --> 00:02:06,430
So what does the claim to select this face like this face so that we have a plain.

30
00:02:07,610 --> 00:02:14,080
At the middle of these two faces now sinek this face as the sketching plea.

31
00:02:16,720 --> 00:02:17,830
She was the number two button.

32
00:02:18,880 --> 00:02:23,990
Now I will create a rectangle somewhere near the center of the plane.

33
00:02:25,460 --> 00:02:26,660
And takes the sketch pattern.

34
00:02:27,040 --> 00:02:30,550
Now we have a rectangle created at the mid plate here.

35
00:02:32,430 --> 00:02:34,890
Selecta, we want to cut to.

36
00:02:36,330 --> 00:02:38,550
This is my sketch, and I want to rotate.

37
00:02:39,570 --> 00:02:42,650
Now we have direction to rule out also.

38
00:02:45,100 --> 00:02:52,460
I choose 130 degrees in this roll out and I choose 150 in the direction by roll out.

39
00:02:53,510 --> 00:02:54,130
Okay, button.

40
00:02:56,580 --> 00:02:57,300
You can see.

41
00:02:59,950 --> 00:03:05,050
This time, cut is made in two directions, one direction, one and direction to.

42
00:03:06,580 --> 00:03:08,510
So this is how we use that word.

43
00:03:08,710 --> 00:03:10,520
Cut to solid hooks.

44
00:03:10,900 --> 00:03:12,220
Thank you for watching this video.