1 00:00:11,830 --> 00:00:12,020 Hello. 2 00:00:13,000 --> 00:00:16,500 Welcome to the world of computer aided design with SolidWorks. 3 00:00:17,740 --> 00:00:25,810 Today, we are going to create this model sketch to create this model is giving here and all the dimensions 4 00:00:25,810 --> 00:00:28,760 that are required to create this sketch are also provided here. 5 00:00:30,620 --> 00:00:31,540 Create this model. 6 00:00:32,040 --> 00:00:38,960 First of all, we need to create the base feature and the sketch for the base feature is this circle, 7 00:00:39,230 --> 00:00:41,630 which is having a 3-D value of 50 units. 8 00:00:43,620 --> 00:00:49,040 So they you think this more of the sketch, come on, manager. 9 00:00:49,520 --> 00:00:52,080 We are already in the sketching environment of sorted woods. 10 00:00:52,490 --> 00:00:54,140 So click on this so-called. 11 00:00:56,110 --> 00:00:57,220 There's the centerpoint. 12 00:00:59,360 --> 00:01:00,610 It is values 50. 13 00:01:04,270 --> 00:01:05,470 So click here. 14 00:01:06,360 --> 00:01:09,610 Andreadis value of 50 is displayed along with the cost. 15 00:01:10,450 --> 00:01:13,940 Now we need to create this portion of the sketch. 16 00:01:15,580 --> 00:01:21,400 Diameter for the NASA is 10 units and radius for the outer rock is. 17 00:01:23,300 --> 00:01:24,500 I mean, 10 units. 18 00:01:26,850 --> 00:01:28,330 So click on the circle to. 19 00:01:30,600 --> 00:01:33,320 So, like this quadrant has the center point for the circle. 20 00:01:37,600 --> 00:01:41,110 As the diameter for the circle is 10, so radius will be five. 21 00:01:43,400 --> 00:01:49,190 Now we have to create a circle again at the same center radius value of 10 units. 22 00:01:50,790 --> 00:02:00,440 She was no Caperton now trim the unwanted fact she was the trim entities to and trim despond, this 23 00:02:00,790 --> 00:02:03,220 font disbarred and disbarred. 24 00:02:04,460 --> 00:02:10,290 Now we have to circle this up, located on the circumference of the center. 25 00:02:11,150 --> 00:02:13,240 And number of items are six. 26 00:02:13,760 --> 00:02:16,600 Get out of the trim tool by clicking on this closed item button. 27 00:02:18,520 --> 00:02:22,990 Go to the Selenia sketchpad and drop down and choose circular sketch pattern to. 28 00:02:24,400 --> 00:02:25,620 Entities to factor in. 29 00:02:26,800 --> 00:02:30,400 Now click on the entities to pattern added box and select the circle. 30 00:02:30,640 --> 00:02:31,540 And this outright. 31 00:02:33,890 --> 00:02:41,720 In the number of instances in books and value add six press enter. 32 00:02:43,240 --> 00:02:43,800 Spacing. 33 00:02:44,090 --> 00:02:45,410 Check boxes selected. 34 00:02:46,370 --> 00:02:53,000 So the instances are placed at equal missing value and on the circum friends of the sub. 35 00:02:54,020 --> 00:02:55,070 So click on this. 36 00:02:55,190 --> 00:02:55,940 Okay, but enough. 37 00:03:00,370 --> 00:03:01,370 Let's shift this sketch. 38 00:03:03,330 --> 00:03:04,360 A bit to the left. 39 00:03:09,110 --> 00:03:11,150 Now we have to trim this unwanted fat. 40 00:03:12,560 --> 00:03:19,040 So choose the trim entities to and and this pot to spot the spot. 41 00:03:22,600 --> 00:03:24,870 But this fight and this fight. 42 00:03:38,870 --> 00:03:40,670 Similarly trimmed, unwanted, but. 43 00:03:43,180 --> 00:03:44,430 The site of the sketch. 44 00:03:55,090 --> 00:03:58,300 So we are done creating with this outer part of the sketch. 45 00:03:58,840 --> 00:04:08,410 Now we need to create these three slots in C Central Circle along with these slots run having a diameter 46 00:04:08,410 --> 00:04:12,460 value of seventy units so I can go to the circle, too. 47 00:04:13,650 --> 00:04:19,090 And this time I'll create a circle the radius value of 35 units. 48 00:04:26,840 --> 00:04:31,630 Selects for construction, shake box and head document. 49 00:04:33,210 --> 00:04:34,690 That is first create this flood. 50 00:04:36,270 --> 00:04:37,090 Create this slot. 51 00:04:37,300 --> 00:04:43,150 We need to create these two reference lights, flash reference line is at an angle of 30 degrees with 52 00:04:43,150 --> 00:04:49,480 respect to the horizontal and the second reference line, it's at an angle value of 45 degrees with 53 00:04:49,480 --> 00:04:50,950 respect to the phosphorescence. 54 00:04:53,970 --> 00:04:59,850 After creating these two defense lines, we will get two points of intersection, first one between 55 00:04:59,850 --> 00:05:02,820 this reference line and the circle. 56 00:05:03,300 --> 00:05:06,280 And second one between this reference line and this set. 57 00:05:06,890 --> 00:05:11,780 And these intersection points will act as the start and end points of the slope. 58 00:05:13,300 --> 00:05:16,490 So let us walk the line to what's to fall. 59 00:05:16,600 --> 00:05:18,400 I'll create a horizontal line. 60 00:05:20,230 --> 00:05:24,280 Arcing through the quadrant and centrepoint of the circles. 61 00:05:27,810 --> 00:05:35,900 Select this line and convert it into a construction line by selecting for construction checkbox again 62 00:05:35,900 --> 00:05:36,890 in the line two. 63 00:05:38,300 --> 00:05:39,350 This is the first point. 64 00:05:42,180 --> 00:05:46,910 And the second point will lie on the southern France of this dotted circle. 65 00:05:48,780 --> 00:05:52,150 The able went online tools for the second reference line. 66 00:05:55,790 --> 00:06:04,160 So we have created these two reference lanes, so like the center line created earlier and fix its location 67 00:06:04,400 --> 00:06:06,200 by clicking on this fix option. 68 00:06:07,530 --> 00:06:08,610 And then to document. 69 00:06:10,740 --> 00:06:14,840 And what a smart, dimensioned tool and select this line. 70 00:06:15,020 --> 00:06:16,100 And then the center line. 71 00:06:17,610 --> 00:06:18,970 Plays that angle value. 72 00:06:22,470 --> 00:06:26,830 This angle value is 30 degrees, change disvalue to 31. 73 00:06:29,560 --> 00:06:33,580 Now, again, select this line segment and the center line. 74 00:06:36,040 --> 00:06:37,180 In place, the damage already. 75 00:06:38,110 --> 00:06:40,330 This time the angle value will be 45 plus 30. 76 00:06:40,380 --> 00:06:41,430 Seventy five degrees. 77 00:06:45,970 --> 00:06:51,450 Now select these two line segments by pressing and holding the control keys on your keyboard. 78 00:06:51,930 --> 00:06:52,470 And then. 79 00:06:53,670 --> 00:06:56,530 She this for Construction Checkbook's. 80 00:07:00,700 --> 00:07:04,540 Now we have the Centrepoint start point and end point of the slide. 81 00:07:04,950 --> 00:07:09,490 Choose this Centrepoint out slot to. 82 00:07:12,020 --> 00:07:13,190 This is the center point. 83 00:07:13,880 --> 00:07:15,170 This is the start point. 84 00:07:15,320 --> 00:07:15,740 And. 85 00:07:16,840 --> 00:07:19,310 This one is the end point for the start. 86 00:07:22,150 --> 00:07:25,280 You can see the verdict of the slaughters, 10 units. 87 00:07:27,150 --> 00:07:30,650 As the values are displayed here in Meeta, so this rally is fine. 88 00:07:31,150 --> 00:07:38,960 So we created the first slot after creating the slot as the escape key to get out of the slot to. 89 00:07:41,830 --> 00:07:47,660 I can see in the sketch we need to create two more slots like this and on the sitcom Friends of This 90 00:07:47,660 --> 00:07:48,170 Inner Circle. 91 00:07:49,180 --> 00:07:52,370 So choose the Sirtris sketch pattern two from this dropped out. 92 00:07:54,110 --> 00:07:56,300 And click on the entities to pardon. 93 00:07:57,980 --> 00:08:00,130 Let's folks link this slot. 94 00:08:02,800 --> 00:08:06,460 And in the number of instances, it blocks have changed the value to three. 95 00:08:08,710 --> 00:08:09,800 Then I choose this. 96 00:08:09,880 --> 00:08:10,050 OK. 97 00:08:15,100 --> 00:08:17,110 So we are done with creating the sketch. 98 00:08:17,640 --> 00:08:21,810 Now click on this excerpt sketch tool to get into the part modeling and. 99 00:08:23,500 --> 00:08:28,930 Good features, come on, manager, and choose this extruded boss face to. 100 00:08:30,590 --> 00:08:37,370 The value required extrusion is 20 of the type 20 and hit the Okimoto. 101 00:08:46,070 --> 00:08:48,900 In this way, we have created the solid modern. 102 00:08:51,410 --> 00:08:55,190 You'll rotate it and view it at the desired orientation. 103 00:08:58,980 --> 00:09:00,210 Thank you for watching this video.