1 00:00:14,470 --> 00:00:17,770 Welcome to the world of computer aided design with SolidWorks. 2 00:00:18,930 --> 00:00:24,670 Rick, you are going to create this model in front of you and dot two of the model. 3 00:00:24,810 --> 00:00:31,740 I'm giving you all the dimensions that are required to create this model available in these beautiful. 4 00:00:33,490 --> 00:00:37,110 Image file is available in the resource section for Don. 5 00:00:39,170 --> 00:00:40,730 Let's start creating this model. 6 00:00:42,330 --> 00:00:45,050 What the file menu and then choose this new option. 7 00:00:46,820 --> 00:00:49,150 SolidWorks documented, Chatterbox's displayed. 8 00:00:50,470 --> 00:00:54,460 It sure this Port Dabb is chosen here and then take on the occupant. 9 00:00:56,550 --> 00:00:58,910 We are in the modeling environment of solid. 10 00:00:59,920 --> 00:01:06,420 Now we need to create the base feature the base feature, we need to create its sketch. 11 00:01:07,040 --> 00:01:09,620 So from the sketch, come on, manager. 12 00:01:10,110 --> 00:01:11,640 Choose this sketch to. 13 00:01:12,590 --> 00:01:13,660 Look differently. 14 00:01:14,630 --> 00:01:15,550 Select differently. 15 00:01:15,660 --> 00:01:16,600 That's a sketching plan. 16 00:01:17,820 --> 00:01:21,840 Choose this corner rectangle to create a rectangle. 17 00:01:22,380 --> 00:01:28,260 This okay button, which is the spot dimension to this lower edge of the rectangle. 18 00:01:28,520 --> 00:01:29,550 That is the dimension. 19 00:01:30,030 --> 00:01:31,020 And change it to. 20 00:01:32,210 --> 00:01:33,260 300 units. 21 00:01:36,500 --> 00:01:41,810 This edge of the rectangle is the dimension and change it to twenty five units. 22 00:01:44,490 --> 00:01:45,570 The second to. 23 00:01:55,660 --> 00:02:00,370 So you introduce value to the units and does it create? 24 00:02:02,210 --> 00:02:03,680 Circle with the same center. 25 00:02:10,890 --> 00:02:13,050 Radius valued to 100 Fabians. 26 00:02:15,570 --> 00:02:16,350 On the ocular. 27 00:02:18,630 --> 00:02:21,810 Was the smart dimensioned to select this? 28 00:02:23,690 --> 00:02:27,140 What is of the rectangle and intellect, the center point of the circle? 29 00:02:28,320 --> 00:02:31,260 The damage in and changed is valued at thirty nine units. 30 00:02:34,100 --> 00:02:39,920 Make sure the centerpoint of the circles is in alignment with the center point of this. 31 00:02:41,020 --> 00:02:42,180 Lord of the recording. 32 00:02:44,260 --> 00:02:49,350 I know the trim entity's tool and trim unwonted, but like this. 33 00:03:01,620 --> 00:03:05,080 Driving then wanted but luck on the Edzard sketchpad. 34 00:03:07,380 --> 00:03:08,650 Did this gets a bit. 35 00:03:10,080 --> 00:03:13,720 The features command manager, she was this excellent boss. 36 00:03:13,810 --> 00:03:14,280 Best to. 37 00:03:15,550 --> 00:03:18,760 This end condition dropdown list choose the military option. 38 00:03:21,110 --> 00:03:24,560 The death added box type 150 into. 39 00:03:25,650 --> 00:03:26,460 Lincoln, Documentum. 40 00:03:27,900 --> 00:03:29,280 We have created the best feature. 41 00:03:30,940 --> 00:03:32,840 Now we need to create the cottage. 42 00:03:34,640 --> 00:03:38,750 Look at this reference to Mitry drop down Konda name to. 43 00:03:40,500 --> 00:03:42,640 Like this covered face as the first reference. 44 00:03:43,910 --> 00:03:46,520 Second difference, so this. 45 00:03:47,510 --> 00:03:48,290 On that point. 46 00:03:49,640 --> 00:03:50,720 The good fleece. 47 00:03:51,850 --> 00:03:54,400 It's on the chromatin created a plane. 48 00:03:55,900 --> 00:03:59,630 Select this plane and then choose this sketch button from the public menu. 49 00:04:01,530 --> 00:04:04,130 Space on your back and then choose just normal to. 50 00:04:06,260 --> 00:04:07,400 Choose the circled tool. 51 00:04:08,270 --> 00:04:13,520 SNAP to this point of the edge and drag the goal set in horizontal direction. 52 00:04:15,680 --> 00:04:19,960 The key for the centrepoint on the circle and change the radius value. 53 00:04:20,660 --> 00:04:23,960 Seventy five units into. 54 00:04:25,810 --> 00:04:29,950 Like on the spot damage and to this point and select this point. 55 00:04:31,390 --> 00:04:33,880 So you decided to 150 units send. 56 00:04:39,460 --> 00:04:45,660 Any move to circle, to snap to this midpoint of the edge and create a circle like this? 57 00:04:47,120 --> 00:04:48,200 The greatest value. 58 00:04:48,410 --> 00:04:49,430 Twenty five minutes. 59 00:04:51,310 --> 00:04:56,530 Yet another circle is in what is until alignment that this is Centrepoint. 60 00:05:00,790 --> 00:05:01,910 Mean that he just ran. 61 00:05:02,040 --> 00:05:03,010 Twenty five minutes. 62 00:05:04,770 --> 00:05:06,280 To the slight dimension to. 63 00:05:08,790 --> 00:05:12,170 The center point of the circle and this age. 64 00:05:15,320 --> 00:05:16,530 If the damage in value. 65 00:05:17,810 --> 00:05:19,520 Change it to twenty five minutes. 66 00:05:23,960 --> 00:05:27,760 The center and this age, the value of 225 becomes. 67 00:05:30,130 --> 00:05:32,680 Now linked to yet. 68 00:05:33,610 --> 00:05:34,870 Lines like this. 69 00:05:46,880 --> 00:05:48,200 The animal declined to. 70 00:05:49,560 --> 00:05:51,270 Yate landslips. 71 00:06:03,330 --> 00:06:10,590 You have to make sure that these lines are tangent to the circles like this line segment where the control 72 00:06:10,590 --> 00:06:10,950 key. 73 00:06:11,540 --> 00:06:12,200 This circle. 74 00:06:14,130 --> 00:06:16,470 Daniel, adoption and click on the occupant. 75 00:06:18,930 --> 00:06:22,740 So the line segment prison, the control key, select this circle. 76 00:06:23,890 --> 00:06:26,630 Like the Tenjin talks, like on the ultimate. 77 00:06:28,470 --> 00:06:29,030 Gladly. 78 00:06:29,280 --> 00:06:31,920 We need to make the lines tangent to the circles. 79 00:06:46,440 --> 00:06:47,520 This line segment. 80 00:06:48,990 --> 00:06:51,930 Circle holding the control key. 81 00:06:53,630 --> 00:06:54,840 To the Daniel Tosh. 82 00:07:16,730 --> 00:07:20,770 Now we need to trim the unwanted by the click on this trim entities to. 83 00:07:23,580 --> 00:07:27,050 But but but this. 84 00:07:28,630 --> 00:07:29,570 They can document. 85 00:07:31,570 --> 00:07:32,610 There's a sketch button. 86 00:07:35,830 --> 00:07:37,450 Click on this extruded cut to. 87 00:07:39,010 --> 00:07:41,790 Like this flip side to cut tables. 88 00:07:44,280 --> 00:07:46,170 From this condition dropdown list. 89 00:07:47,360 --> 00:07:48,550 Was this two hour auction? 90 00:07:50,020 --> 00:07:51,130 Take on the okay button. 91 00:07:52,680 --> 00:07:56,210 Now go to this different cemetery dropdown and choose the plane to. 92 00:08:00,620 --> 00:08:06,970 What did this feature manager design, three button choose toppling as the first reference. 93 00:08:08,980 --> 00:08:11,930 Is the offset value to 150 units? 94 00:08:13,340 --> 00:08:13,730 Into. 95 00:08:15,030 --> 00:08:16,420 And click on The Ultimate. 96 00:08:18,480 --> 00:08:19,590 She was displaying to. 97 00:08:21,060 --> 00:08:27,180 Then choose the sketch option from the pop up menu, spacebar and the keyboard and then choose this 98 00:08:27,180 --> 00:08:27,760 normal to but. 99 00:08:29,550 --> 00:08:31,710 Now back on the circle to. 100 00:08:32,770 --> 00:08:36,520 Drag the up in horizontal alignment with. 101 00:08:37,680 --> 00:08:38,250 This point. 102 00:08:41,830 --> 00:08:43,250 A circle like this. 103 00:08:44,470 --> 00:08:48,380 The radius rallying 75 units into. 104 00:08:50,210 --> 00:08:51,040 Gondar Okimoto. 105 00:08:54,440 --> 00:09:01,870 Will the smart dimension to this point at this point change its value to 150 units? 106 00:09:05,490 --> 00:09:05,880 Mandan. 107 00:09:07,740 --> 00:09:08,960 Click on the exit sketchbook. 108 00:09:11,040 --> 00:09:12,730 This extruded boss based to. 109 00:09:15,370 --> 00:09:16,690 This was dedication button. 110 00:09:17,890 --> 00:09:26,940 Now, from this dropdown list, was this up to surface option in see the face splenetic boxes like this 111 00:09:27,390 --> 00:09:28,980 dogface of the modern. 112 00:09:31,310 --> 00:09:32,780 Like on the welcome mat. 113 00:09:36,000 --> 00:09:36,440 Extinct. 114 00:09:36,520 --> 00:09:42,040 We need to do is we need to create the counterweight or stop face of the modern. 115 00:09:43,990 --> 00:09:47,490 What did this whole desert drop down into this whole resort to? 116 00:09:55,810 --> 00:09:56,950 The whole tape roll out. 117 00:09:57,100 --> 00:10:00,550 We have this untoward option selected. 118 00:10:02,810 --> 00:10:03,670 It sure does. 119 00:10:03,920 --> 00:10:04,130 Sure. 120 00:10:04,350 --> 00:10:06,630 Custom sizing, check boxes selected. 121 00:10:08,720 --> 00:10:11,040 Now, the two hold diameter is. 122 00:10:12,270 --> 00:10:13,390 75 units. 123 00:10:14,480 --> 00:10:17,980 Jean Dispended, a 75 dappy. 124 00:10:19,520 --> 00:10:24,530 Now we need to specify the countable diameter, which is one hundred units under it. 125 00:10:26,980 --> 00:10:35,050 Next thing you need to specify, the countable depth is just 20 unquoted, the position stop and then 126 00:10:35,310 --> 00:10:37,040 select the top face of the modern. 127 00:10:41,820 --> 00:10:43,380 Least of all like this. 128 00:10:45,360 --> 00:10:45,930 Okay, Martin. 129 00:10:47,220 --> 00:10:51,760 We need to locate this comparable hole at its exact location. 130 00:10:53,350 --> 00:10:55,290 Look on this little sign here. 131 00:10:56,370 --> 00:11:02,060 Justice this it's full and then choose this sketch option on the public many. 132 00:11:04,790 --> 00:11:07,100 Sketching enlightenment, not select this. 133 00:11:08,820 --> 00:11:12,780 Right here in prison, holder control key and sitting this ultrarich. 134 00:11:14,280 --> 00:11:18,110 She looked as concentric option from the adulations rule out other properties. 135 00:11:18,240 --> 00:11:19,050 Property manager. 136 00:11:21,170 --> 00:11:21,500 London. 137 00:11:23,050 --> 00:11:23,910 They did Scotchman. 138 00:11:26,580 --> 00:11:29,230 Counterposed hall is at its exact location. 139 00:11:33,470 --> 00:11:37,280 We need to create two more balls on this one on this case. 140 00:11:37,430 --> 00:11:38,510 And one on this face. 141 00:11:39,780 --> 00:11:42,860 So click in this box and type. 142 00:11:44,800 --> 00:11:45,760 Simple whole option. 143 00:11:49,060 --> 00:11:50,350 Need to select a location. 144 00:11:51,550 --> 00:11:52,800 We want to create the whole. 145 00:11:54,830 --> 00:11:56,750 I'm going to select this face. 146 00:11:58,730 --> 00:12:00,480 The depth value for the hole is. 147 00:12:01,660 --> 00:12:02,570 Five units. 148 00:12:03,040 --> 00:12:07,030 Twenty five year into the diameter of the hole is. 149 00:12:09,580 --> 00:12:10,440 Thirty five units. 150 00:12:10,980 --> 00:12:12,300 Yes, this and. 151 00:12:14,990 --> 00:12:15,930 The okay button. 152 00:12:19,210 --> 00:12:19,540 OK. 153 00:12:19,710 --> 00:12:22,740 We need to place this whole at its exact location. 154 00:12:24,400 --> 00:12:29,650 The Columbus sign said it skipped six and then to this edit schedule. 155 00:12:31,670 --> 00:12:34,180 It's like this of the whole. 156 00:12:37,350 --> 00:12:40,810 This age of the model while pressing the control key. 157 00:12:42,770 --> 00:12:43,920 This concentric option. 158 00:12:45,200 --> 00:12:46,180 The condo occupant. 159 00:12:48,430 --> 00:12:50,140 Look, on this exit sketch, what? 160 00:12:52,600 --> 00:12:58,160 In the same way, you can create a hole on this face of the model. 161 00:13:00,360 --> 00:13:00,830 Spacebar. 162 00:13:01,310 --> 00:13:04,250 And you keep that to this isometric button. 163 00:13:06,350 --> 00:13:07,540 This is the final model. 164 00:13:08,780 --> 00:13:10,190 Thank you for watching this week.