1
00:00:00,150 --> 00:00:00,600
Hello.

2
00:00:00,870 --> 00:00:01,650
And this will you.

3
00:00:01,940 --> 00:00:10,500
We will create a very simple single Perceptron model to classify flower species depending on their Bitel

4
00:00:10,800 --> 00:00:11,880
length and pattern.

5
00:00:15,030 --> 00:00:19,650
We will be using a Skillern to create this single Perceptron model.

6
00:00:20,730 --> 00:00:28,080
In the latter part of this course, we will use Get US and 10 SAP flow to create multi-level Perceptron

7
00:00:28,080 --> 00:00:34,770
models, as Skillern is a very popular machine learning liablity for Python.

8
00:00:36,510 --> 00:00:46,650
It is the go to library to create regression classification decision trees or as we are models, we

9
00:00:46,650 --> 00:00:50,160
have separate lectures on all this machine learning models.

10
00:00:50,640 --> 00:00:57,000
So if you are interested in learning any one of these, you can go ahead and check out what courses

11
00:00:57,090 --> 00:01:01,350
on regression classification be Sentry's and SVM.

12
00:01:03,620 --> 00:01:06,260
So let's start first.

13
00:01:06,470 --> 00:01:08,750
We will import numbers and find us.

14
00:01:10,010 --> 00:01:12,530
Now, if you have installed Anakonda.

15
00:01:14,190 --> 00:01:17,550
There is no need to install a skillern separately.

16
00:01:18,300 --> 00:01:19,860
You just have to import Eskinder.

17
00:01:20,970 --> 00:01:29,400
But in case you are facing any error in importing a Skillern, you can install it using BEP or Condah

18
00:01:29,400 --> 00:01:29,910
installed.

19
00:01:30,600 --> 00:01:32,550
So just run this.

20
00:01:32,550 --> 00:01:36,270
Come on, Pip, install a Skillern in your command prompt.

21
00:01:37,680 --> 00:01:46,080
You can open your command prompt by pressing windows odd and write CMB and that one come on and hit

22
00:01:46,080 --> 00:01:49,110
enter there in the command prompt.

23
00:01:49,260 --> 00:01:53,790
You can write this code and execute it to install Escalon.

24
00:01:55,110 --> 00:01:57,620
What else you can directly lead on this code?

25
00:01:58,090 --> 00:02:03,030
And despite the notebook and this will also install Escalon for you.

26
00:02:04,440 --> 00:02:06,540
So if you have installed a Skillern.

27
00:02:07,770 --> 00:02:09,990
First, we will load iris data.

28
00:02:11,880 --> 00:02:14,220
There are various CSP files out there.

29
00:02:14,400 --> 00:02:17,640
You can also import those see as we file to load this data.

30
00:02:19,230 --> 00:02:25,140
But as Skillern have some predefined datasets and we will load our ideas data from there.

31
00:02:26,730 --> 00:02:29,650
So just right from Eskil under datasets.

32
00:02:29,820 --> 00:02:30,830
Import load.

33
00:02:31,110 --> 00:02:32,250
Underscore itis.

34
00:02:32,880 --> 00:02:37,220
And then we are saving the world IRI's data into this variable iris.

35
00:02:38,930 --> 00:02:40,200
So just run this.

36
00:02:42,240 --> 00:02:49,040
Now, let's take a look at the data, you can see there are four columns.

37
00:02:51,230 --> 00:02:59,780
To call, said Sepur Land Sepúlveda by the land and Paton's with, as I have said earlier this year,

38
00:02:59,790 --> 00:03:01,950
data of different types of flowers.

39
00:03:02,760 --> 00:03:06,140
There are three different types of flowers, Sentosa.

40
00:03:06,920 --> 00:03:08,860
What's the color virginica?

41
00:03:09,420 --> 00:03:13,600
And for each of this flower, we have their Sepur length Sepúlveda.

42
00:03:13,890 --> 00:03:15,120
But the length and petals.

43
00:03:16,860 --> 00:03:25,680
So here we have this four variables and that category is stored in Iris Dort Target.

44
00:03:26,970 --> 00:03:34,740
So in our example, we want to create a Perceptron model which would identify whether the flower what

45
00:03:34,740 --> 00:03:42,210
is Sentosa or not using by Dalvik and by the length as the independent variables.

46
00:03:44,400 --> 00:03:47,310
If you want, you can take all the four variables.

47
00:03:47,840 --> 00:03:54,480
But for example, we are just taking these two variables to predict where the flower is Towser or not.

48
00:03:56,130 --> 00:04:01,650
So we want our independent variable to be this petal length and petal look.

49
00:04:02,550 --> 00:04:07,300
We will store this information in another variable which we are calling X.

50
00:04:08,460 --> 00:04:11,250
We are defining X as itis DOT data.

51
00:04:11,640 --> 00:04:15,270
And here we just want the third and fourth column.

52
00:04:15,360 --> 00:04:17,510
That's why we have returned to comment three.

53
00:04:18,450 --> 00:04:21,060
If you remember, the indexing starts with zero.

54
00:04:21,540 --> 00:04:24,930
So the last two columns are two and three.

55
00:04:25,560 --> 00:04:26,640
Just run this.

56
00:04:27,780 --> 00:04:29,970
So over X variable is now ready.

57
00:04:31,040 --> 00:04:34,070
Now let's just look at the target variable.

58
00:04:36,240 --> 00:04:44,820
Here you can see we have different categories, zero one and two zero percent for Sentosa.

59
00:04:45,390 --> 00:04:50,070
One sentence for what Ziggler and two stands for Virginica.

60
00:04:51,760 --> 00:04:57,270
Now, if you have some machine learning knowledge, you may know that to create classification more

61
00:04:57,270 --> 00:05:00,780
than what y variable should be in the form of zero and one.

62
00:05:02,190 --> 00:05:11,910
So ideally we want one and all these records where the flower is set, Oza and zero and all this records

63
00:05:12,270 --> 00:05:15,420
where the flower is vertical or virginica.

64
00:05:16,760 --> 00:05:23,000
So let's just convert this target, we able using some basic operations first.

65
00:05:25,130 --> 00:05:29,660
Let's convert this target variable in the form of true and false.

66
00:05:30,450 --> 00:05:34,430
We want to where the flowery sentosa.

67
00:05:34,820 --> 00:05:37,400
That is the value of target is zero.

68
00:05:38,090 --> 00:05:42,770
And we want false where the flower is Virginica or Cicala.

69
00:05:43,400 --> 00:05:47,690
That is the numerical value is one or two.

70
00:05:49,850 --> 00:05:52,300
So let's just blend this.

71
00:05:52,310 --> 00:05:52,730
Come on.

72
00:05:53,060 --> 00:05:57,640
We are just checking whether the target is equal to zero or not.

73
00:05:58,280 --> 00:06:00,610
If the target is zero, we will get group.

74
00:06:00,800 --> 00:06:03,950
And if the target is not equal to zero, we will get false.

75
00:06:04,040 --> 00:06:05,000
Let's run this.

76
00:06:08,180 --> 00:06:09,980
Now let's look at our very well.

77
00:06:11,650 --> 00:06:18,250
You can see we have converted zeros, two crew and one or two boot false.

78
00:06:20,810 --> 00:06:25,820
Now, in the next step, we want to convert this windfalls falls to one zero.

79
00:06:26,330 --> 00:06:28,610
We want one in place of all.

80
00:06:28,910 --> 00:06:32,760
And we want zero in place of false.

81
00:06:34,670 --> 00:06:39,730
So we will just use as type method and we will convert it to.

82
00:06:39,990 --> 00:06:45,670
And so just on and on look at our way variable.

83
00:06:47,000 --> 00:06:54,560
So as you can see now, our way variable is an array with one and zero.

84
00:06:55,070 --> 00:06:58,900
One means that Dorsa and zero means not sentosa.

85
00:07:02,390 --> 00:07:07,250
Now let's look at our X variable before creating a Perceptron model.

86
00:07:09,350 --> 00:07:16,340
You can see our X variable is a two dimensional array with by the length and patella with.

87
00:07:20,360 --> 00:07:22,880
No one would extend Liberty Bell, said Brady.

88
00:07:23,960 --> 00:07:30,260
We just have to create our Perceptron model and dream that model using this X and Y variables.

89
00:07:33,230 --> 00:07:40,110
We can create a single Perceptron more than using a Skillern, but to create MLP on my level, but it's

90
00:07:40,110 --> 00:07:42,690
separate more than we have to use Cadeaux Intensive.

91
00:07:44,150 --> 00:07:48,260
We will be looking at l.P in the later part of this Goetze.

92
00:07:49,560 --> 00:07:54,920
But now we will create this sub growth model using Escalon only.

93
00:07:58,270 --> 00:08:02,950
Now first we need to import Perceptron from Eskil and Autoline anymore.

94
00:08:02,990 --> 00:08:06,330
Then let's just import it.

95
00:08:06,990 --> 00:08:10,950
And you can also look at the documentation using this link.

96
00:08:11,850 --> 00:08:16,380
This Dubai term notebook is also shared in the resources section of this video.

97
00:08:16,890 --> 00:08:20,940
So you can download it and learn it if you want to practice.

98
00:08:23,100 --> 00:08:27,090
So this is the official document of Perceptron in Skillern.

99
00:08:28,360 --> 00:08:34,380
You can look at all the parameters which we can give, the first one is the penalty.

100
00:08:35,500 --> 00:08:42,400
If you remember, in linear regression, there are regularization terms, L1, a clue also known as

101
00:08:42,460 --> 00:08:43,550
LASO and Rich.

102
00:08:45,490 --> 00:08:50,390
You can also give us a thought that is the variable we use for regularization.

103
00:08:51,970 --> 00:08:54,880
Then there are different other hyper parameters.

104
00:08:54,970 --> 00:08:59,230
We will just stick to basic before hyper parameters.

105
00:08:59,860 --> 00:09:01,870
But you can look at it if you want.

106
00:09:02,350 --> 00:09:09,130
These are just some very basic parameters that we get with most of the machine learning algorithms.

107
00:09:11,240 --> 00:09:19,640
Now, as with any other on machine learning, more than we first have to create an object of that algorithm,

108
00:09:20,150 --> 00:09:29,300
then we have to fit over X and Y variables and to that object and then we can use that object to predict

109
00:09:29,330 --> 00:09:30,910
the future values of way.

110
00:09:32,240 --> 00:09:37,430
So first, let's create an object that is Perceptron classifier.

111
00:09:37,970 --> 00:09:47,510
We are naming Autobody Willis, but underscored see L.F. and then we are using Perceptron that we have

112
00:09:47,510 --> 00:09:51,450
just imported and we are giving only one hyper parameter.

113
00:09:51,560 --> 00:09:54,020
That is a random mistake to equate to 42.

114
00:09:54,770 --> 00:09:59,330
This is basically to reproduce the same result whenever we run this model.

115
00:09:59,840 --> 00:10:04,550
So if you give random set, you will always going to get the same result.

116
00:10:06,320 --> 00:10:09,050
Giving this hyper parameter is not mandatory.

117
00:10:09,080 --> 00:10:11,840
You can skip that also if you want.

118
00:10:12,620 --> 00:10:19,610
And in the next lane, we are putting our X and Y variables into this object.

119
00:10:20,030 --> 00:10:21,380
So let's find this.

120
00:10:23,480 --> 00:10:24,800
So what model is screened?

121
00:10:25,400 --> 00:10:27,500
You can get the values of before you type in.

122
00:10:27,540 --> 00:10:29,300
But I might add here if you want.

123
00:10:32,030 --> 00:10:35,090
Now, let's clear the value using overclassify, our object.

124
00:10:35,820 --> 00:10:37,940
We can just use DOT, predict my.

125
00:10:38,430 --> 00:10:45,870
So this is the word object and we are using DOT predict and we are giving our independent and variable,

126
00:10:46,020 --> 00:10:49,020
which is X as an input.

127
00:10:51,060 --> 00:10:52,170
Let's do that.

128
00:10:55,620 --> 00:10:58,350
You can see this are the predicted values.

129
00:10:58,740 --> 00:11:02,970
We can compare this predicted values with the actual values.

130
00:11:04,200 --> 00:11:06,390
There is no need to manually do that.

131
00:11:07,020 --> 00:11:08,580
That isn't another function.

132
00:11:08,760 --> 00:11:18,270
That is accuracy scored available in Escalon, which will give us the accuracy of what prediction accuracy

133
00:11:18,270 --> 00:11:25,830
score vary between zero and one zero means zero percent accuracy, which means all the predictions are

134
00:11:25,830 --> 00:11:26,130
wrong.

135
00:11:26,820 --> 00:11:31,340
And one means hundred percent accuracy, which meant all the predictions are right.

136
00:11:32,970 --> 00:11:39,750
So let's just first import accuracy score from a scalar, not my cricks.

137
00:11:40,350 --> 00:11:42,960
And then we are going to use accuracy score.

138
00:11:43,920 --> 00:11:46,020
And here there are two arguments.

139
00:11:46,050 --> 00:11:48,330
First, we have to provide the actual values.

140
00:11:48,570 --> 00:11:52,020
And in the next argument, we have put away the predicted values.

141
00:11:52,770 --> 00:11:55,590
So what actual values are restored in just five variable?

142
00:11:56,220 --> 00:11:57,570
And the predicted values?

143
00:11:57,750 --> 00:12:00,120
We have restored in VI underscore pride.

144
00:12:00,780 --> 00:12:05,550
So let's get the accuracy score of forward predictions.

145
00:12:06,840 --> 00:12:11,820
So the accuracy here is one that is hundred percent accuracy or what?

146
00:12:11,820 --> 00:12:18,720
Perceptron was able to identify the speci of the float with 100 percent accuracy.

147
00:12:20,490 --> 00:12:22,290
Now, this is a very simple model.

148
00:12:22,350 --> 00:12:28,320
Usually we don't use Perceptron for any regression or classification tasks.

149
00:12:29,590 --> 00:12:34,530
We usually go for machine learning techniques where the data is not falling.

150
00:12:34,700 --> 00:12:38,680
And in context, Petten and we use really well for an LP.

151
00:12:38,960 --> 00:12:39,340
We're.

152
00:12:40,440 --> 00:12:42,810
The details following a very complex pattern.

153
00:12:43,740 --> 00:12:49,030
Usually you will never find yourself using Perceptron and business settings.

154
00:12:49,470 --> 00:12:51,360
But this is just an introduction.

155
00:12:51,690 --> 00:12:58,100
And we want you to give just some basic idea about running Perceptron models using Escolar.

156
00:12:59,910 --> 00:13:03,900
Now, after training your mother, you will get these two attributes.

157
00:13:04,200 --> 00:13:05,250
That is the coefficient.

158
00:13:05,360 --> 00:13:06,510
And then Sept.

159
00:13:08,270 --> 00:13:13,820
Basically over Perceptron is dividing this space using linear regression line.

160
00:13:14,360 --> 00:13:16,130
So this is the coefficient.

161
00:13:17,030 --> 00:13:20,270
And this is the intercept of that line.

162
00:13:21,440 --> 00:13:31,130
So your equation of that line will be four minus one point four times by the length minus two point

163
00:13:31,130 --> 00:13:31,790
two times.

164
00:13:31,810 --> 00:13:32,500
But Elphick.

165
00:13:34,750 --> 00:13:43,990
So if you want to create that line, you can use coefficient and intercept values to do that, and you

166
00:13:43,990 --> 00:13:49,510
can also see the impact of our different variables on the Y variable.

167
00:13:50,410 --> 00:13:55,360
So this coefficient is giving you the impact of each of those variables.

168
00:13:55,570 --> 00:13:59,350
This is the impact of the land and this the impact of pattern.

169
00:14:01,210 --> 00:14:02,650
That's all for this lecture.

170
00:14:03,970 --> 00:14:09,880
Next, we will look at tensor flow and get us to create our MLP model.

171
00:14:10,210 --> 00:14:10,600
Thank you.
