1
00:00:00,990 --> 00:00:01,950
We have to create demand model.

2
00:00:02,580 --> 00:00:05,780
The first part is specifying the model architecture.

3
00:00:07,320 --> 00:00:14,140
This time we are going to have four convolutional layers coupled with four pulling lives.

4
00:00:14,770 --> 00:00:22,170
So if you look at this architecture, first is a convolutional layer with 32 Priddis, then there is

5
00:00:22,170 --> 00:00:26,000
a max pooling layer with a two by two gunmen.

6
00:00:26,400 --> 00:00:31,650
That is, it will reduce the size of image by half in both dimensions.

7
00:00:32,010 --> 00:00:36,270
So overall, the number of pixels will be one foot in this resulting image.

8
00:00:38,580 --> 00:00:40,370
Then there is a convolutional to deliver.

9
00:00:42,270 --> 00:00:43,570
Then there is a max pooling layer.

10
00:00:44,700 --> 00:00:45,690
Then again, a conditioner.

11
00:00:46,050 --> 00:00:47,090
Then a max pooling there.

12
00:00:47,640 --> 00:00:49,490
And the fourth congressional with a match.

13
00:00:51,200 --> 00:00:54,720
You can also notice that the number of printers are increasing.

14
00:00:55,890 --> 00:00:57,700
We first find out 32 features.

15
00:00:58,650 --> 00:01:02,490
Then in the next list, we have 60 plus features.

16
00:01:03,960 --> 00:01:06,300
After that, we have 128 and 128.

17
00:01:07,410 --> 00:01:13,260
So it is a common practice in convolutional neural networks to increase the number of features that

18
00:01:13,260 --> 00:01:15,600
you are taking out from the model.

19
00:01:16,740 --> 00:01:21,720
So you will often see a structure like this with increasing feature maps.

20
00:01:23,630 --> 00:01:24,110
Ask what?

21
00:01:24,110 --> 00:01:24,730
Deep, willingly.

22
00:01:26,220 --> 00:01:33,480
You can see that often each pulling list, the number of says we keep on reducing.

23
00:01:34,680 --> 00:01:38,520
So in the initial image, we have 150 by 150.

24
00:01:39,480 --> 00:01:47,400
When you apply a pulling layer, we will be left with 75 by 75 dimension feature layered up the second

25
00:01:47,400 --> 00:01:47,910
Pullinger.

26
00:01:48,090 --> 00:01:49,860
It will be 37 by 37.

27
00:01:50,290 --> 00:01:50,900
No ourselves.

28
00:01:51,030 --> 00:01:59,230
But we really are the third pulling that a really further reduce by half and up to deport putting there.

29
00:01:59,970 --> 00:02:09,720
You can see that we'll have very few cells, but each of these cells will then give their output, which

30
00:02:09,720 --> 00:02:10,490
will be flattened.

31
00:02:11,370 --> 00:02:12,680
So we have a flat and left.

32
00:02:13,720 --> 00:02:21,660
And this left will give the output to a normal multi-level Perceptron with phosphate and that which

33
00:02:21,660 --> 00:02:28,650
has 500 neurons and one output neuron with the activation function sigmoid.

34
00:02:31,350 --> 00:02:37,410
When we have fashion amnesty to say we used softmax function because there were multiple classes.

35
00:02:38,550 --> 00:02:46,200
Now, since we have only two classes, we can use sigmoid activation function to our degan unless we

36
00:02:46,200 --> 00:02:48,330
are using RELU using function.

37
00:02:51,270 --> 00:02:56,520
So this is the structure of our model, the state, to create the structure.

38
00:03:01,040 --> 00:03:08,170
You can run this model, come on, look at how many layers do you have in this deep checkbook?

39
00:03:08,960 --> 00:03:14,300
So one convolutional, then one max pooling the convolutional and the max pooling and so on.

40
00:03:15,580 --> 00:03:20,050
Overall, there are three point four million parameters to be trained.

41
00:03:22,160 --> 00:03:23,960
The next step is to compile a model.

42
00:03:25,130 --> 00:03:28,580
When we are compiling the model, there are two mandatory parameters.

43
00:03:28,870 --> 00:03:30,980
Manistee lost function that we have to use.

44
00:03:32,580 --> 00:03:36,320
Earlier we used sparse, categorical cross entropy.

45
00:03:36,860 --> 00:03:40,640
This time we are going to use binary cross and repeat because there are only two classes.

46
00:03:42,500 --> 00:03:50,030
We have also to optimize it using Artemus prop, optimize it this time with a learning radio 10 to the

47
00:03:50,040 --> 00:03:51,000
pilot minus put.

48
00:03:53,510 --> 00:03:59,900
We have done this because we know that orders prop gives a better result than its duty in a military

49
00:03:59,900 --> 00:04:01,170
commission type of problems.

50
00:04:03,190 --> 00:04:10,200
Will see often automats prop or Adam optimize it being used instead of a Judi's for such problems.

51
00:04:12,240 --> 00:04:20,390
However, as a Lennert, I would suggest that you also try to run with SDD once and with automats prop

52
00:04:20,390 --> 00:04:24,030
once and look at the defense.

53
00:04:24,330 --> 00:04:30,470
Indeed, learning time that it takes and the accuracy that is duty gives vs. Artemus problems.

54
00:04:32,570 --> 00:04:36,000
So try out both of these items.

55
00:04:36,000 --> 00:04:41,730
Prop will clearly stand out, which is why we are going to use automats prop optimizer Distin.

56
00:04:45,700 --> 00:04:47,830
Thirdly, we want to look at the accuracy.

57
00:04:48,280 --> 00:04:51,400
So we have specified that metrics to be monitored.

58
00:04:51,580 --> 00:04:55,560
Is accuracy to be underscored?

59
00:04:56,620 --> 00:04:58,380
And that model is combined.
