1
00:00:00,660 --> 00:00:08,460
Now, in this video, we are going to create artificial image data, which we are going to use as training

2
00:00:08,460 --> 00:00:11,700
data to improve the performance of our model.

3
00:00:14,520 --> 00:00:16,570
So the first step is same.

4
00:00:17,370 --> 00:00:19,170
We need to create directory variables.

5
00:00:20,100 --> 00:00:25,080
If you are continuing with the last project, these variables will already be created for you.

6
00:00:26,460 --> 00:00:32,970
Since I have created a new project, I need to run these lines of code again to create directory variables.

7
00:00:36,840 --> 00:00:43,710
Now, this is the point where we have difference between the last model and this model, this time in

8
00:00:43,710 --> 00:00:45,120
the image data generator.

9
00:00:45,720 --> 00:00:52,470
Instead of just having this rescale parameter, we are going to give a few more parameters.

10
00:00:53,280 --> 00:01:04,980
The concept is image data generator is going to generate new images by rotating, shifting, sharing

11
00:01:05,210 --> 00:01:08,670
or zooming the images that we already have in us.

12
00:01:10,860 --> 00:01:16,020
So imagine that we have an image of a cat face image.

13
00:01:16,020 --> 00:01:23,790
Data generator will create a new image from that face by rotating that at some particular angle.

14
00:01:24,990 --> 00:01:35,390
We have given that range for that angle from zero to 40 degrees or shifting that face horizontally or

15
00:01:35,400 --> 00:01:37,350
vertically by 20 percent.

16
00:01:38,460 --> 00:01:41,390
Sheering the image sharing.

17
00:01:41,400 --> 00:01:46,710
There was two translating different pixel roles, but different values.

18
00:01:47,490 --> 00:01:54,710
So the bottom most rule of pixel will remain at its position and the top most will move horizontally

19
00:01:54,720 --> 00:01:55,920
by some percentage.

20
00:01:56,550 --> 00:02:02,700
So we have given a sheer range of, again, 20 percent, a zoom range of 20 percent.

21
00:02:05,550 --> 00:02:07,380
Horizontal flip is also allowed.

22
00:02:07,830 --> 00:02:17,610
So the image can be horizontally flipped and film mode suggest what is to be done with newly created

23
00:02:17,610 --> 00:02:18,240
pixels.

24
00:02:18,540 --> 00:02:23,130
For example, when we hear the end image, there will be some newly created pixels.

25
00:02:23,550 --> 00:02:27,450
When we zoom out, there will be some newly created pixels.

26
00:02:27,930 --> 00:02:30,030
What should be done with those pixels?

27
00:02:31,110 --> 00:02:37,800
When we said phillimore to nearest, it means whatever is the nearest value of pixel in that actual

28
00:02:37,800 --> 00:02:38,160
image.

29
00:02:38,430 --> 00:02:41,400
That would be free throughout the newly created pixels.

30
00:02:43,500 --> 00:02:44,970
So I'll go through this again.

31
00:02:45,690 --> 00:02:53,580
Rotation means you can give a value between zero to 180 and it tells what is the range of rotation within

32
00:02:53,580 --> 00:02:56,400
which the image will be randomly rotated.

33
00:02:57,230 --> 00:02:57,810
Hi, Chip.

34
00:02:58,050 --> 00:03:05,070
And we'd shift our ranges within which deep picture will be horizontally or vertically translated.

35
00:03:08,210 --> 00:03:13,060
Shearing's is what shearing transformations luminance is for.

36
00:03:13,220 --> 00:03:23,990
Zooming in or zooming out, horizontal flip is flipping the image horizontally, and Fillmore is used

37
00:03:23,990 --> 00:03:31,310
for filling the newly created pixels, which will appear when we do a rotation or zoom in or shirting.

38
00:03:33,200 --> 00:03:38,810
So when we give all these parameters, random values of all these parameters will be taken.

39
00:03:39,350 --> 00:03:42,410
And a new image will be created from the old image.

40
00:03:43,040 --> 00:03:43,870
That's underscored.

41
00:03:44,780 --> 00:03:52,220
Now, this data gene function is really this will be used for generating data, for training and validation

42
00:03:53,720 --> 00:03:54,650
for testing.

43
00:03:55,100 --> 00:03:57,020
We do not need to do any such things.

44
00:03:57,170 --> 00:03:58,580
We have our test set.

45
00:03:59,180 --> 00:04:07,400
We just need to reskill the information in that using image data generator function, but only specifying

46
00:04:07,430 --> 00:04:07,640
this.

47
00:04:07,660 --> 00:04:10,190
But we drove reskilling by 255.

48
00:04:10,940 --> 00:04:17,510
So we'd underscore the strange NATO function will be exactly same as last time.

49
00:04:17,900 --> 00:04:19,940
Only difference will be the second parameter.

50
00:04:21,080 --> 00:04:26,750
Instead of using the train gen that we created last time, we are going to use this data engine data.

51
00:04:27,890 --> 00:04:31,600
Will have additional randomly generated images also.

52
00:04:32,300 --> 00:04:39,770
So when this brain generator is giving images of bad taste today, to this time we distribute instead

53
00:04:39,770 --> 00:04:40,370
of going deep.

54
00:04:41,750 --> 00:04:49,310
So when this dream generator is giving images in batches of today to all of the images, will have something

55
00:04:49,310 --> 00:04:51,350
changed from the original dataset.

56
00:04:53,360 --> 00:04:58,530
So the original image will have a random mutations in all of these parameters.

57
00:04:58,880 --> 00:05:06,020
And those 32 newly generated images will be sending class more is still binary.

58
00:05:06,650 --> 00:05:07,100
Exactly.

59
00:05:07,100 --> 00:05:09,230
Same thing is done for validation generated.

60
00:05:10,510 --> 00:05:12,910
We run both of these lines of code.

61
00:05:17,260 --> 00:05:20,460
Our model architecture, again, stays the same.

62
00:05:21,420 --> 00:05:28,470
We have Ford Convolutional Lears for Max pulling levers in combination with each convolutional layer.

63
00:05:29,370 --> 00:05:38,100
After that, we have a flattened layer which gives its output as input to our densely connected neural

64
00:05:38,100 --> 00:05:38,610
network.

65
00:05:39,670 --> 00:05:40,990
So we create this architecture.

66
00:05:43,650 --> 00:05:45,510
You can see the model again if you want to.

67
00:05:47,010 --> 00:05:54,600
Then we compile this model again with these same lost function, which is binary cross and Droopy Optimizer

68
00:05:54,780 --> 00:05:58,170
is automats prop with a learning rate of 10 is about minus four.

69
00:05:58,980 --> 00:06:01,890
And the metric we are going to monitor is accuracy.

70
00:06:05,820 --> 00:06:07,710
This fit function is all the same.

71
00:06:08,970 --> 00:06:17,450
So if you have noticed the only difference in this model than the previous model is here, the Rangin

72
00:06:17,730 --> 00:06:20,470
has been replaced by dadaji and data.

73
00:06:20,480 --> 00:06:28,770
Jane has more parameters instead of just one of rescaling with all the random values of these parameters

74
00:06:29,110 --> 00:06:31,380
will have newly created images.

75
00:06:31,800 --> 00:06:38,610
Those images will go in a batch of 32 and the steps, but epoch is still hundred.

76
00:06:39,510 --> 00:06:47,070
So the thing is, last thing in each people, there were two thousand images using which the training

77
00:06:47,070 --> 00:06:48,900
was being done this time.

78
00:06:49,530 --> 00:06:56,800
Since we are generating 32 image bache, we will have 32 hundred images but epoch.

79
00:06:58,560 --> 00:07:08,520
Now when we done this, it is again going to take a long time, but hopefully this will give us better

80
00:07:08,580 --> 00:07:09,750
validation, accuracy.

81
00:07:11,190 --> 00:07:12,150
Let's wait and watch.
