1
00:00:00,510 --> 00:00:06,210
In this video, we will learn how to decompose time series data using Python

2
00:00:09,110 --> 00:00:10,290
in order to Reflektor.

3
00:00:10,530 --> 00:00:19,320
We have discussed that we can create a time series data as a combination of four different parts.

4
00:00:20,070 --> 00:00:29,540
Level grained seasonality and noise level is the average value in the cities trend.

5
00:00:29,730 --> 00:00:33,680
Is that increasing or decreasing value in the cities?

6
00:00:35,100 --> 00:00:41,300
Seasonality is the repeating short term cycle in the cities and noise is the random variation in those

7
00:00:41,310 --> 00:00:41,830
cities.

8
00:00:44,910 --> 00:00:50,660
Now there are two ways to combine these four parts to create a time series data.

9
00:00:50,880 --> 00:00:59,640
First is the additive model in which we treat our Time series data as a sum of these four components

10
00:00:59,720 --> 00:01:02,130
leveret crane seasonality and noise.

11
00:01:03,660 --> 00:01:10,860
The second way is the multiplicative model in which we assume that our Time series is the multiplication

12
00:01:10,860 --> 00:01:13,200
of all these four different parts.

13
00:01:14,940 --> 00:01:20,750
Now, it would be great if we can identify these four components from our series.

14
00:01:22,050 --> 00:01:25,860
It will help us in better understanding over time cities.

15
00:01:27,060 --> 00:01:34,410
And it will also help to perform different types of preprocessing for all this, for different parts

16
00:01:34,410 --> 00:01:35,340
of their time cities.

17
00:01:36,840 --> 00:01:44,400
So now let's learn how to decompose our time cities data in these four different parts.

18
00:01:47,540 --> 00:01:53,080
Now, decomposing time cities in these four different parts is very easy in Britain.

19
00:01:54,500 --> 00:02:01,520
There are premade functions available in libraries such as steak murder to barbarically decompose time

20
00:02:01,520 --> 00:02:03,860
cities using just a single come on.

21
00:02:06,800 --> 00:02:08,330
So let's take an example.

22
00:02:09,200 --> 00:02:13,040
We will be using the same data that tells us U.S. airline data.

23
00:02:13,800 --> 00:02:17,600
And and this time we are saving it in our data frame.

24
00:02:17,730 --> 00:02:21,450
Miles Beacom, underscore D.F..

25
00:02:22,700 --> 00:02:23,950
Now, let's run this.

26
00:02:23,960 --> 00:02:24,290
Come on.

27
00:02:27,940 --> 00:02:33,770
And now let's also change the index of, what, minus two duffing?

28
00:02:34,970 --> 00:02:37,860
So before that, let's have a look.

29
00:02:40,800 --> 00:02:43,580
And the first five values of this stuffing.

30
00:02:48,770 --> 00:02:54,800
You can see we have the money in our first column which contained the beat data.

31
00:02:55,730 --> 00:03:00,460
The second column here is Mines M-m, which contain the value of data frame.

32
00:03:01,640 --> 00:03:08,040
And you can also see the indexes are numeric starting from zero.

33
00:03:10,430 --> 00:03:13,760
Not to use premade functions and liabilities.

34
00:03:13,850 --> 00:03:18,230
We have to convert our data frame in that data frame.

35
00:03:18,410 --> 00:03:21,290
Their indexes are in the form of data.

36
00:03:22,130 --> 00:03:28,420
So that's why we are changing indexes of our data frame from numeric to beat format.

37
00:03:28,790 --> 00:03:29,960
So let's run this.

38
00:03:31,780 --> 00:03:36,320
This index we are using is minus the com d.f. dot index.

39
00:03:36,650 --> 00:03:38,420
So we are referring to index.

40
00:03:38,780 --> 00:03:44,600
And then we are basically saving what month data in place of this index value.

41
00:03:45,520 --> 00:03:46,340
That stand this.

42
00:03:46,380 --> 00:03:48,930
Let's look at the first five values again.

43
00:03:49,760 --> 00:03:56,780
So you can see now the indexes are in the form on dates and set of numeric.

44
00:04:00,530 --> 00:04:09,710
Now we're going to use seasonally decompose function from such small liability to directly get these

45
00:04:09,710 --> 00:04:12,240
components from our data cities.

46
00:04:12,860 --> 00:04:17,960
So let's import seasonally decompose function from a search model first.

47
00:04:19,160 --> 00:04:21,590
And to use this function.

48
00:04:21,710 --> 00:04:24,380
We need to provide two parameters.

49
00:04:25,190 --> 00:04:29,170
First, we have to grow in the cities which contains our values.

50
00:04:29,750 --> 00:04:37,010
And in the second parameter, we have to provide whether we want to use an additive model or make duplicate

51
00:04:37,010 --> 00:04:37,460
a model.

52
00:04:40,250 --> 00:04:45,780
So we are creating another variable result which is going to contain the result of this function.

53
00:04:46,430 --> 00:04:54,210
We are using seasonally compose and as a series we are providing our minus data from this Dufresne.

54
00:04:54,860 --> 00:05:02,870
So we are mentioning our data, Femia, and the column which contains the values of Forward Time series

55
00:05:02,870 --> 00:05:03,140
data.

56
00:05:03,530 --> 00:05:10,760
So we are mentioning models decompose, SBF and minus M-m and first we are going to use an additive

57
00:05:10,760 --> 00:05:11,120
model.

58
00:05:11,300 --> 00:05:14,170
So that's why we are writing more than we do additive.

59
00:05:15,170 --> 00:05:16,100
Let's run this.

60
00:05:18,790 --> 00:05:20,780
Now our result object is ready.

61
00:05:20,930 --> 00:05:30,260
We can Derek lead right with a dot plot to get the values of seasonality, train and noise, et cetera.

62
00:05:30,570 --> 00:05:31,940
So let's run this.

63
00:05:36,040 --> 00:05:40,100
So you can see we are getting four different line checks.

64
00:05:41,040 --> 00:05:42,550
First is the observed.

65
00:05:43,570 --> 00:05:46,590
This is the line chart of over what is not data cities.

66
00:05:49,120 --> 00:05:51,400
The second line chart is off trends.

67
00:05:52,330 --> 00:05:59,410
This line chart give us the trend values after removing noise and seasonality from our data.

68
00:06:02,110 --> 00:06:03,810
The next is the seasonal line.

69
00:06:03,830 --> 00:06:08,480
Check this line chart will give us the seasonality trend in our data.

70
00:06:11,220 --> 00:06:19,020
The next line chart is of the reservation values that are remaining after incorporating trend and seasonality.

71
00:06:22,430 --> 00:06:28,010
One thing to note here is that you have to look at y axis as well.

72
00:06:28,700 --> 00:06:34,160
So for the first group, the Y axis is between zero to four Pinto's and train.

73
00:06:34,250 --> 00:06:39,230
The Y axis is between zero to 12500 and fourth seasonality.

74
00:06:39,290 --> 00:06:44,290
The Y axis labels are between minus two tosing to 2000.

75
00:06:44,990 --> 00:06:51,680
So we can see that the seasonality variation in our data is from minus two poles on unit two plus two

76
00:06:51,680 --> 00:06:52,350
thousand unit.

77
00:06:53,720 --> 00:07:01,100
So don't just look at the graphs, look at the scale of your y axis as well to better understand the

78
00:07:01,100 --> 00:07:01,610
city's.

79
00:07:04,270 --> 00:07:10,600
Now let's learn how to decompose data, cities using them multiplicative more than so earlier.

80
00:07:10,840 --> 00:07:16,480
While using a great deal more than we were giving model equal to a relative as one of the argument.

81
00:07:19,420 --> 00:07:26,890
To be composed using multiplicative more than we have to give than equal to multiplicative instead of

82
00:07:26,950 --> 00:07:28,520
additive as an outcome.

83
00:07:30,100 --> 00:07:34,060
So this time we are saving our reserves and to reserve, too.

84
00:07:34,630 --> 00:07:37,350
And we are using the same functions seasonally decompose.

85
00:07:37,450 --> 00:07:44,870
We are mentioning the column where we have our values, which is mights decompose, D.F. and minus cement.

86
00:07:45,580 --> 00:07:48,140
And this time we are going to use multiplicative more.

87
00:07:49,720 --> 00:07:51,600
So let's run this on.

88
00:07:51,910 --> 00:07:55,910
Let's again load this new desert of multiplicative model.

89
00:08:00,350 --> 00:08:04,780
So this is the result we are getting in the first line, Chad.

90
00:08:05,120 --> 00:08:10,410
We have to observe the values of what the densities and the second target.

91
00:08:11,750 --> 00:08:13,940
We have the trained values and the code.

92
00:08:14,240 --> 00:08:15,950
We have the seasonality variation.

93
00:08:16,370 --> 00:08:19,400
And in the fourth chart, we have that as a real value.

94
00:08:20,390 --> 00:08:22,850
Again, look at why it is as well.

95
00:08:23,930 --> 00:08:26,360
So you can see that for seasonality.

96
00:08:26,770 --> 00:08:30,800
A word is what varies from point eight to one point two.

97
00:08:31,940 --> 00:08:34,950
That's because we are using multiplicative model here.

98
00:08:35,900 --> 00:08:40,010
So for additive seasonality, we were adding seasonality value.

99
00:08:40,040 --> 00:08:42,920
That's why we were getting minus 2000 to 2000.

100
00:08:43,850 --> 00:08:46,460
But here we are multiplying the seasonality.

101
00:08:47,120 --> 00:08:50,540
So point eight means we are reducing the value of whity.

102
00:08:50,960 --> 00:08:56,840
And one point two means we are increasing the value of whity by 20 percent.

103
00:08:59,960 --> 00:09:01,410
So it ended in murder.

104
00:09:01,970 --> 00:09:10,310
We were using absolute value to add on, but in my typical day model, we are multiplying that value

105
00:09:10,550 --> 00:09:11,390
with our data.

106
00:09:11,420 --> 00:09:16,490
That's why the seasonality value lies between point eight to one point.

107
00:09:18,950 --> 00:09:27,050
Now, this is a very easy way to analyze whether your data have Grendon seasonality in it or not.

108
00:09:27,650 --> 00:09:31,220
So just use seasonally decompose function from its search.

109
00:09:31,230 --> 00:09:37,640
Smardon to analyze your data cities and identify the tendencies, the literary pattern in your data.

110
00:09:39,020 --> 00:09:40,190
That's all for this lecture.

111
00:09:40,340 --> 00:09:40,820
Thank you.
