Hi there.
In this tutorial, we will learn how to create a photographic logo in Adobe Photoshop.
So let's take a look at how it will create a simple photograph, a logo.
At first we have to create a new document.
And therefore, we will go in file menu and then new option.
So here is the pop up for creating or new document.
And our wheat will be six inches and a high two will be four inches.
So I am clicking on OK.
Here is our document.
And at first I will use that type tool and I'm using type two because at first we will write the name
of photography agenesis.
Therefore, we have to use that type tool to type the name of a photography agency.
So here is the type tool.
And we will use these ethnocentric funt if you don't have these ethnocentric font.
You don't have to worry about.
Already we have given the ethnocentric font in our exercise file.
You will get in a logo design folder.
So let me write the name of adeno.
See, but they must as agency see is a flame photograph.
So.
But you're right.
Flame.
OK.
So here is the name of a photograph agency.
Or look so well.
So here is a checkmark and I'm clicking on here.
OK, cool.
And right now I will write the photographs.
And therefore I have to type photography.
Let me write.
Photographs.
Oh, let me radials the font size.
Therefore, I have to select this.
And Chad takes to and here is the size option for font.
I will go for Hardan point six.
Dean sixteen point will, Richard.
OK, but we will not use this.
It most cindric font in this text and we will use every font for this text.
So let's change the font.
Jeri's that aerial font.
And we will lose the bond.
So here is the bullet, Monch.
Looks better and we have to capitalized every alphabet, so therefore we have to we have to select these
properties options.
So here is the properties option and we want to capitalized into text.
So here is the option type option, some selecting here and you can take a look.
Every alphabet is the low end capital letter.
OK.
And we Will Cain.
These are photographic eggs to along we of flame takes.
So let's do that.
We have to select this into text.
And again, we will go for proper option and we will do some spacing.
We want to increase the space between Alphabet's.
So let's increase the space here.
OK, let me minimize the properties.
And here is the cheek Mark, OK?
Looks good.
By two, we will scale Agel with the same wheat margin.
Therefore, we have to scale it.
And therefore, emplacing control our Carment T bottom from our keyboard and let's scan it properly.
OK.
Looks good.
And here is a tick mark.
I want to place this to text in central L.A. mantle.
So therefore, I have to select bought two layers.
And here I am in two takes clear.
And let me select what, two takes.
Layers and I will be able.
The move tall for you is the most to.
And then it will change the alignment option.
So I want to place it center of the document.
Now looks much better, but we will not use this color, as I told you before, that we will create
a simple photograph, a logo.
And therefore, we will not ale's this color.
But before changing color, let's complete the logo part.
And right now, I want to insert a camera image as because we are creating a photography logo.
Therefore, camera a major will be or will eventual with this logo.
So let's import a camera image and therefore we have to open our exercise file.
So here is the file menu.
And here is the open option in the logo design folder.
It will get this camera image.
You just have to select this camera image and then you have to click open option.
So here is our camera image and we have to crack and drop this image in our logo design document.
So you just have to use the most tool and you have to drag and drop here.
OK.
Right now I will turn off the takes layers.
So let me turn off the text layers.
And right now we will work with this camera image.
So at first I will cart this camera and I will make it in a two part.
And therefore, I have to use a rectangular mark.
Three tools, such areas, that rectangular market tools.
And I want to place this part in our part and this part in lower.
So the Selectric part I want to place in the lower part of logo.
Therefore, I want to cut it and to cut.
You can press control our command X from your keyboard.
Ah, here is the edit menu.
From there you can go for cut options.
So let me click this cut option and it can take a look.
The lower part is gone.
But we have to do some little work in here.
So let me zoom in.
This image.
We want to put this into our area with the black khaliah.
You can take a look at only two part is remaining white.
I mean, is the part of the.
But I don't want to put this white area in here.
I want to poured into our black area.
So therefore, I have to remove the white part.
And therefore, we have to use quick selection tool.
So here is a quick selection tool and we will select this entire part.
So at first I think we have to select this wide part.
Let me select Venture White.
OK?
And right now we will use a brush tool.
So why is the brush tool?
Here is a brush tool.
OK, so here's the brush tool.
And please make sure your foreground color should be black.
So you have to choose the black color for your foreground color.
And now we will draw the black color over here.
OK, cool.
So let's do this and let the selection by pressing control our homeland.
D..
OK, but.
Here is a wide selection remaining.
And I want to remove this wide selection in the flesh.
So one second, I have to use the quick selection to and to let me see, like this entire white part.
And you can take a look.
This entire white part get selected and you just have to press delete button from your keyboard.
So let me tell it.
This white board.
OK.
Done.
It's gone.
And you have to press control our common D button to deselect.
OK.
So let me zoom out the image and to zoom out.
I will do this manually.
So here is the View manual.
And here is that zoom out option
once more.
We'll zoom out.
OK.
So our upper part is done.
And right now we will turn off the layers.
So let me turn off the name first.
So here is the name of a photography agency, Flame.
So let's scale.
This takes all with this camera.
IMH.
And therefore, you have to select this.
Flame layers in our layer panel.
I mean, this takes clear and then you have to press control or command to you from your keyword.
OK, let's scale it properly.
OK.
Looks good.
You can click on this checkmark or you can press on the interim what's on your keyboard.
OK.
Looks good.
And now we will turn on the photograph.
See?
Takes later.
So let's turn on this photograph it takes to layer.
OK.
Looks good.
And right now we will paste the rest of duck coming apart.
And therefore, we have to use control.
Zieba Botulin, are those where you are using megabuck you can for us.
Come on to V, watch an R.
There is this tool where two.
Do you have tool.
Click this edit menu and here is the paste option.
So you just have to click on here.
And here is that.
Rest of the part off camera.
So we have to scale it first, and therefore we have to press control our common T.
OK.
Looks good.
And we will place this photograph it takes in here inside this camera body.
And let us do that.
But before doing that, we have to make this entire body black.
So we will do the same things as like before, which we did in here.
And we will do the same things and we will make this entire body part black.
So let's do this on one things.
Let me press the enter button on my keyboard and then I have to use this quick selection tool and let
me select this entire part.
And then we will use the Brosh tools.
Here is the Brosh tool.
And let's paint the entire white part.
OK.
Now we can press control a comment D button to be select and you can take a look some extra quiet or
remain.
And we don't want to use these extra wide part.
We want to delay this and therefore we will use that rectangle market tool.
So here is that Rectangle Mochrie tools and we will ease this.
I mean, we will select this extra part and then we will press delete button from our keyboard.
OK, it's gone.
And you can press control or common D button to deselect this.
So let's plays this photography.
Text inside this body and therefore we have to scale these body parts properly.
And therefore, let me press control our common T.
And I want to please sit here.
Looks good.
And all right, now I will scale this takes properly with the body.
So therefore, we have to select this photograph, see layer in here.
So here is the layer.
And you have to press control our common T button to scale it properly.
And we will place it.
Right now, we will change the font color of photography as because it's placed inside a black background,
so therefore we have to use the white font color.
So therefore, you just have to double click on this photograph.
It takes later.
Then they will get the selection and A is the color for your font.
So you just have to select on here and we will pick the white color.
And there is the tick mark.
OK.
Looks good.
And right now we will change the flame text color.
So let's find out the flame layer inside only our panel.
So here is the flame takes the air.
You just have to double click on here and they will get the selection.
And here is the color picker option and we will use the black color.
So here is the black color and I'm selecting.
Okay.
And here is the tick mark.
So this is how it will create a simple photography logo and Adobe Photoshop.
But this is just a logo in Photoshop.
And all we want to take Kolo.
What is the realistic view of this logo?
And therefore, we will place this logo in a mockup.
And therefore, we have to open our exercise file and inside our exercise file, we have at the glass
mockup.
And let's open that mockup file.
So here is the file menu.
Open option and inside our logo design folder.
You will get this mockup folder.
So here is the 3D glass window logo mockup.
If I just have to open this.
So here is the open option.
So we have to double Plake on this smart object and the name of this layer is your lobal and we have
to place our photography logo on here.
So let me open this.
Your local layers.
And we have to double click on here.
And here is.
The tab and we have to place our logo on here.
And I want to turn up this review level layer.
So here is the Bravia logo layers.
I want to turn off this layer and we will place our.
Photography logo on here.
So let's bring our photography local in here, but we have to make our all logo transparent.
We don't have to place the background.
And here is the background layer we have to turn off in the background layer.
And right now, it's totally transparent.
So we have to select this entire layers in our layer panel.
So there's a scene.
This entire list.
We don't have too much layers in here because it's quite simple photography logo.
And you can take a look.
Already we have selected this entire layers.
You can select this and share layer by pressing control our common bottom on your keyboard.
And then you can select each and layers in order layer panels.
So here is the move tool.
You have to use this most tool.
And we will place this logo on our your logo.
So let's truck and truck over there.
Let me try again.
Try try to track and let me drop in here.
We just have to click, OK?
So here is our logo.
And I want to scale it properly.
And there are four.
You have to press control our comment, tea and.
Or let's make this logo bigger.
Then we will have the clear view.
OK.
Looks good.
And here is the tick Mark Flitwick plate on this cheek, Mark.
And right now you have to save this tab, because if you save this tab, then you will get a clear view
on here right now.
We will save the stab and therefore we have to go in file menu and here is a save option.
So you just have to like this.
See you option.
It will take time.
OK.
Our images saved.
And let's get back to this 3D Lessel window mockup is different and we will get a triple a realistic
view.
Here we go.
This really looks mind blowing.
And let me zoom in.
This image you can take a look.
Is really awesome.
Really awesome.
And this is the realistic view.
So this is quite simple, but fantastic.
A photograph SEAL logo.
So if you have any question regarding this tutorial to create a photograph in local, you can arrive
in our common box.
Ah.
And you can try minimum three or four times by watching this tutorial and you feel practice minimum
three or four times by watching this tutorial.
Then you can easily create the photographing logo and Adobe Photoshop.
So I'll see you in the next place on my right.