1
00:00:06,180 --> 00:00:06,630
Here.

2
00:00:06,660 --> 00:00:14,060
Even so in this video we are going to finish a program that is the conditions when the columns are 2

3
00:00:14,120 --> 00:00:15,440
and columns are 3.

4
00:00:16,190 --> 00:00:16,950
So let's begin.

5
00:00:17,780 --> 00:00:22,250
So first of all we need to do with the two columns.

6
00:00:22,250 --> 00:00:25,760
Then we need to take two inputs from the user.

7
00:00:25,760 --> 00:00:29,150
So let we have X and we have Y.

8
00:00:30,110 --> 00:00:32,810
So these are the two inputs from the user.

9
00:00:33,170 --> 00:00:38,080
And we also need to add up and statement showing that and the two columns.

10
00:00:38,420 --> 00:00:48,680
So this one something like enter and the columns you warn to block it.

11
00:00:49,760 --> 00:01:07,820
And then the same syntax by selecting from data frame had Labor you'll note X will be like input and

12
00:01:07,820 --> 00:01:20,490
they we have first column then viable it'll be like input and then they will have second column.

13
00:01:20,960 --> 00:01:25,980
They will go with that one after that.

14
00:01:26,570 --> 00:01:33,060
Same we have the seven conditions just like the previous one that is bloat equal to one.

15
00:01:33,290 --> 00:01:36,860
Second one is the if deplored.

16
00:01:36,890 --> 00:01:39,790
Equal to equal to two.

17
00:01:40,100 --> 00:01:45,000
And let me organize them accordingly.

18
00:01:45,020 --> 00:01:55,390
After that we had if flawed equal to equal to three then fourth they go with full.

19
00:01:56,250 --> 00:02:06,740
Now five if bloat equal to five this time they are not going to use six and seven in one because they

20
00:02:06,740 --> 00:02:07,670
are different conditions.

21
00:02:07,680 --> 00:02:12,140
No we are going to have output at both the conditions.

22
00:02:12,140 --> 00:02:16,970
After that we have this one seven.

23
00:02:17,930 --> 00:02:21,200
In last we have an S condition.

24
00:02:21,200 --> 00:02:25,280
So these are the only possible conditions we need to work here.

25
00:02:25,520 --> 00:02:29,700
Make all these into NS so Elif leave.

26
00:02:29,800 --> 00:02:31,070
There we go with this one.

27
00:02:31,070 --> 00:02:37,380
This one now let me begin with the logic.

28
00:02:37,490 --> 00:02:43,460
First of all when the plot equal to one then on one we have this one that is the scatter.

29
00:02:43,700 --> 00:02:51,410
And if you remember how we can tell different plots is if I have this one here I need to pass there

30
00:02:52,190 --> 00:03:01,750
a list of variables like first column then I have here a second column shift written David go with two.

31
00:03:02,180 --> 00:03:05,090
So this is what we need to do in this particular situation.

32
00:03:06,080 --> 00:03:10,310
So for that just copy this one.

33
00:03:10,310 --> 00:03:19,070
Come on C and based in this case command we chase these in X go No way.

34
00:03:20,600 --> 00:03:25,060
So this is a scatter plot in that particular situation.

35
00:03:25,370 --> 00:03:30,110
So did the line plot and then we have of us get a plot.

36
00:03:30,110 --> 00:03:35,960
Let me go this with this one and change these in to X

37
00:03:39,110 --> 00:03:49,190
and Y I also just check this one so that you would not get any added after your code is complete.

38
00:03:49,190 --> 00:03:58,340
So I have copied that part shift on David over that one I should applaud with two columns.

39
00:03:58,460 --> 00:04:02,560
First one is to start load second one is that light blue.

40
00:04:02,960 --> 00:04:07,230
After that we have the third one is of a bar bloat.

41
00:04:07,650 --> 00:04:16,940
Then in that case let me just copy this one and paste it in every of these commands see this complete

42
00:04:17,150 --> 00:04:24,820
command we have and we command we command we and command we then we go.

43
00:04:24,920 --> 00:04:31,780
Now in case of this one that is this third one bar.

44
00:04:32,490 --> 00:04:42,240
We had this one and I think I of me I have made a mistake you lack one Beckett in that particular case.

45
00:04:43,380 --> 00:04:47,970
And after that one more record in this case

46
00:04:52,130 --> 00:04:53,130
admitted blessed is

47
00:05:02,380 --> 00:05:07,060
make sure there is no less and more brackets in particular situations.

48
00:05:07,090 --> 00:05:09,530
Now let me check the bar code.

49
00:05:09,580 --> 00:05:09,910
Come on.

50
00:05:09,910 --> 00:05:20,140
See this one board bloat and there we had this one colonel against a working to restart the again.

51
00:05:21,950 --> 00:05:29,580
Wait for this one restarting and David or maybe let me try to run this one.

52
00:05:29,990 --> 00:05:30,330
No

53
00:05:34,700 --> 00:05:36,300
so David O'Connor ready.

54
00:05:36,410 --> 00:05:37,530
This from running fine.

55
00:05:37,670 --> 00:05:45,050
And let me again go to that particular one that we're working at the situation and for that we need

56
00:05:45,050 --> 00:05:47,820
to run the data file one.

57
00:05:47,910 --> 00:05:49,950
There we go with that one.

58
00:05:50,060 --> 00:05:58,060
Now we have the spark plug x is not defined because hex is not in that one.

59
00:05:58,060 --> 00:06:02,650
Hey I need to pass a I need to pass be shifted on.

60
00:06:02,810 --> 00:06:07,620
David go with also for the histogram.

61
00:06:07,620 --> 00:06:11,710
We had this one for two columns box.

62
00:06:11,940 --> 00:06:12,830
We had this one.

63
00:06:13,530 --> 00:06:20,940
And let me check for surface one also shifted done and then we go with this office plot also.

64
00:06:22,080 --> 00:06:29,980
So up to surface plot all will work fine modify add bubble plot here.

65
00:06:30,090 --> 00:06:31,140
This will show me error.

66
00:06:31,320 --> 00:06:35,040
So let me change up to that one.

67
00:06:35,250 --> 00:06:37,310
So here we have haste.

68
00:06:37,410 --> 00:06:42,350
After the haste we have box after that one we have surface.

69
00:06:42,360 --> 00:06:49,860
So here we have office and in last we had the bubble one for which vilifies something else.

70
00:06:49,860 --> 00:06:57,780
And what that is we also need to have an entire variable that will be size added by the user.

71
00:06:58,140 --> 00:07:00,610
And this will be please.

72
00:07:00,660 --> 00:07:11,790
And to these sized column for bubble bloat.

73
00:07:12,200 --> 00:07:15,470
And we had this one after this one.

74
00:07:15,830 --> 00:07:18,890
We will pass the variables inside that one

75
00:07:21,860 --> 00:07:32,300
x equal to x because we had this one X and Y Y equal to weight and size equal to size.

76
00:07:32,600 --> 00:07:37,350
If I copy this come on and try to run that one here.

77
00:07:37,740 --> 00:07:49,780
Change these in to like see this one and this one a and this one like it shifted on.

78
00:07:50,050 --> 00:07:52,070
David go but this is scatter.

79
00:07:53,780 --> 00:08:03,550
This one must be lover and will be that one so this one also need to be bubble here.

80
00:08:03,730 --> 00:08:04,670
There we go.

81
00:08:05,060 --> 00:08:13,840
So this is how bubble folk here with this size and now the last condition that is the S in case then

82
00:08:13,850 --> 00:08:18,000
use it again and does something that is not required.

83
00:08:18,430 --> 00:08:24,160
So for that one of a final float will be equal to the same.

84
00:08:24,160 --> 00:08:25,660
Come on then there

85
00:08:28,660 --> 00:08:31,670
this will come on C and come on.

86
00:08:33,370 --> 00:08:35,950
So we are also done with that one.

87
00:08:35,980 --> 00:08:39,510
Now the condition when we have three columns.

88
00:08:39,990 --> 00:08:48,370
So for three columns we need to have three inputs into the columns

89
00:08:51,470 --> 00:08:56,140
you want to gloat there you have this one.

90
00:08:56,210 --> 00:09:01,790
After that we have two inputs ex input and first column

91
00:09:04,470 --> 00:09:09,570
y equal to second column.

92
00:09:09,600 --> 00:09:14,410
We had this on second column.

93
00:09:14,420 --> 00:09:20,630
After that we have said that will be about the third column.

94
00:09:20,630 --> 00:09:25,210
So here we have turn and column.

95
00:09:25,220 --> 00:09:30,980
Again you can add any number of column after this one.

96
00:09:31,010 --> 00:09:34,520
Now we need to plot similarly like all these.

97
00:09:35,300 --> 00:09:40,490
So for that one we just need to pass three variables instead of two.

98
00:09:41,150 --> 00:09:46,190
But let me first check whether that will VoG or not.

99
00:09:46,190 --> 00:09:48,940
So come on see this one.

100
00:09:49,070 --> 00:10:00,710
Come on we changed this one into a and descending to B and this also need to be with one more bracket

101
00:10:01,160 --> 00:10:03,290
maybe go with that one.

102
00:10:03,930 --> 00:10:14,470
Now the same must be done here and now the third one that is C..

103
00:10:14,660 --> 00:10:23,900
So this get bloat this one working fine after that one we have sketched out with more equal two markers

104
00:10:24,880 --> 00:10:33,620
that we had the sun working fine then we have Bob working fine

105
00:10:36,020 --> 00:10:51,290
paste working fine books working fine and in last we have so far is working fine.

106
00:10:51,290 --> 00:10:54,280
David go with that one now.

107
00:10:54,680 --> 00:10:59,820
The last one I need to check that is above the bubble blog.

108
00:10:59,840 --> 00:11:02,900
Then we will edit all these there.

109
00:11:02,900 --> 00:11:10,490
So just add bubble and never leave any command without checking that one so that you will be able to

110
00:11:10,490 --> 00:11:12,470
find editing last.

111
00:11:12,470 --> 00:11:25,610
So here we have X equal to x sorry a Y equal to B and then we have Z equal to C then we need to pass

112
00:11:25,610 --> 00:11:29,120
these sites that will be B.

113
00:11:30,020 --> 00:11:33,490
So David go with that one bubble broad also looking fine.

114
00:11:34,340 --> 00:11:40,080
So just add in the variable Z here for three.

115
00:11:40,610 --> 00:11:44,420
So that will be this one.

116
00:11:44,420 --> 00:11:58,240
Come on c come on we and discern with said similarly all these up to this one 7.

117
00:11:58,370 --> 00:12:00,380
We have this one.

118
00:12:00,630 --> 00:12:02,840
J Is this up to Z

119
00:12:05,680 --> 00:12:13,050
we have Z Z and this one also this one.

120
00:12:13,060 --> 00:12:21,090
So now we have done up to these and in the last when we need to do the same with this one with the bubble

121
00:12:21,130 --> 00:12:26,520
bloat we have this one bubble bloat here.

122
00:12:27,630 --> 00:12:29,250
What have been this.

123
00:12:29,290 --> 00:12:32,570
And they will then we have final blowout

124
00:12:35,500 --> 00:12:47,540
which will be equal to deafen and then don't I bloat and then pass the kind equal to bubble.

125
00:12:48,260 --> 00:12:50,140
They had this one bubble.

126
00:12:51,040 --> 00:12:53,800
And these are X Y.

127
00:12:53,800 --> 00:12:55,630
Come on T.

128
00:12:55,630 --> 00:13:01,730
Come on V just add one more here that is Z equal to say they deal with that one.

129
00:13:03,250 --> 00:13:10,170
So we are done with this thing and we just need to pass it as condition in that also.

130
00:13:10,180 --> 00:13:14,190
That is the same condition in the previous one.

131
00:13:14,380 --> 00:13:24,790
So come on c come on VE Day we had this one and this as is standing for these and lifts like when we

132
00:13:24,790 --> 00:13:30,100
have coal I mean put more than three or anything else.

133
00:13:30,250 --> 00:13:40,710
So in that case of Ed's condition will be like final bloat and that will be equal to print.

134
00:13:40,780 --> 00:13:44,680
And here we will pass please

135
00:13:47,350 --> 00:13:56,180
and to only 1 2 0 3 we go with that one.

136
00:13:56,440 --> 00:14:03,760
So I've uploaded two also done we have defined for one column we have defined for two columns we have

137
00:14:03,760 --> 00:14:08,950
defined for three columns one is very easy two is also easy you just need to focus that you need to

138
00:14:08,950 --> 00:14:15,780
pass a list and take more than one inputs and in bubble you also need to input the size.

139
00:14:15,780 --> 00:14:17,460
Same with the three.

140
00:14:17,530 --> 00:14:25,480
This is similar to that one just one additional variable that is said in that case then we have as conditions

141
00:14:25,480 --> 00:14:31,500
also and in last we will just return this final note to the program.

142
00:14:32,200 --> 00:14:35,030
So there we have this one completed.

143
00:14:35,980 --> 00:14:41,020
Now let me again replace this file with that filing the last.

144
00:14:41,020 --> 00:14:50,190
Come on take harmonics and that is this one command we David go with this file also.

145
00:14:50,590 --> 00:14:58,540
If I did on this one they we have dismissed so of a program is now completed we have set it up we have

146
00:14:58,540 --> 00:15:04,480
defined the create data function that will define the data then we have two functions here below trend

147
00:15:04,480 --> 00:15:08,560
plotted to one when we have to plot all the data.

148
00:15:08,560 --> 00:15:14,230
Second one is when we need to plot some specific columns in which we have three conditions like then

149
00:15:14,230 --> 00:15:22,300
we need to put 1 Column 2 Column 2 Column then we have program exceptions handling also in which program

150
00:15:22,300 --> 00:15:29,740
get added After that we have of a main function which will define that which function must be passed

151
00:15:29,800 --> 00:15:36,790
and where to pass then here we have our working cells that will define the data and all that.

152
00:15:36,940 --> 00:15:44,260
So in the next next video we will check all of the working of these cells.

153
00:15:44,460 --> 00:15:45,700
So thanks for watching.

154
00:15:45,700 --> 00:15:49,750
This is about the creation of that one and see in the next video.