1
00:00:00,000 --> 00:00:01,000
Right.

2
00:00:01,000 --> 00:00:07,000
So now that we downloaded cubes and verified its integrity, so we're sure that it did not get modified

3
00:00:07,000 --> 00:00:12,000
by anybody else since it was released by the Cube's developers.

4
00:00:12,000 --> 00:00:21,000
The next step is to flash cubes to a USB stick so we can use that USB stick to install cubes.

5
00:00:21,000 --> 00:00:24,000
Now we're going to use a program called Escher.

6
00:00:24,000 --> 00:00:30,000
This is the exact same program that we used to flash tails to a USB stick.

7
00:00:30,000 --> 00:00:35,000
So as we know, this program runs on Windows, Linux and OSX.

8
00:00:35,000 --> 00:00:38,000
I have its download page in here.

9
00:00:38,000 --> 00:00:40,000
All you have to do is just go to it.

10
00:00:40,000 --> 00:00:43,000
It will automatically detect what operating system you have.

11
00:00:43,000 --> 00:00:46,000
Click on download and install it.

12
00:00:46,000 --> 00:00:53,000
You can also use this dropdown menu to download it for other operating systems if it did not detect

13
00:00:53,000 --> 00:00:55,000
your operating system properly.

14
00:00:55,000 --> 00:01:00,000
Now I will not show you how to download and install it because I've already showed you how to do that

15
00:01:00,000 --> 00:01:01,000
previously.

16
00:01:01,000 --> 00:01:08,000
If you don't remember how to do that, please go back to the lecture where we flash tails to a USB.

17
00:01:08,000 --> 00:01:12,000
So what I'm going to do right now, I'm just going to run a chair.

18
00:01:13,000 --> 00:01:17,000
And use it to flush cubes to my USB stick.

19
00:01:17,000 --> 00:01:22,000
Now you'll notice using it is identical to the way that we used it with tails, but I'm just going to

20
00:01:22,000 --> 00:01:25,000
do it again for the sake of completion.

21
00:01:25,000 --> 00:01:31,000
So first of all, you want to click on Select Image to select the image that you want to flash to a

22
00:01:31,000 --> 00:01:32,000
USB stick.

23
00:01:32,000 --> 00:01:37,000
So we're going to navigate to my downloads where I downloaded cubes and I'm going to select the Cubes

24
00:01:37,000 --> 00:01:41,000
ISO image that I downloaded in the previous lecture.

25
00:01:42,000 --> 00:01:45,000
We're going to click on Open and that's it selected.

26
00:01:45,000 --> 00:01:51,000
The next thing is we need to select the drive that we want to flash this Cube's image to.

27
00:01:51,000 --> 00:01:56,000
Now, I haven't connected my USB stick yet, so I'm just going to connect it to my computer.

28
00:01:58,000 --> 00:02:02,000
And as you can see, it will automatically get detected by ETA.

29
00:02:03,000 --> 00:02:08,000
If this wasn't the correct USB stick that you want to flash cubes to.

30
00:02:08,000 --> 00:02:12,000
You can click on change and select the USB device that you want.

31
00:02:12,000 --> 00:02:16,000
Keep in mind, the USB stick that you're going to pick in here will be formatted.

32
00:02:16,000 --> 00:02:19,000
Everything stored on it will be deleted.

33
00:02:19,000 --> 00:02:25,000
So if you're sure this is the correct one, you can click on Flash to start the process.

34
00:02:25,000 --> 00:02:32,000
We're going to click on Yes to Continue, and all we have to do right now is just wait for Archer to

35
00:02:32,000 --> 00:02:38,000
flash the image that we selected, which is the Cube's image to the USB stick that we selected.

36
00:02:40,000 --> 00:02:41,000
Okay.

37
00:02:41,000 --> 00:02:41,000
Perfect.

38
00:02:41,000 --> 00:02:43,000
So now the process is complete.

39
00:02:43,000 --> 00:02:48,000
As you can see, the image was flashed successfully.

40
00:02:48,000 --> 00:02:55,000
So now the USB stick that we selected can be used to boot into the Cube's installer.

41
00:02:55,000 --> 00:03:02,000
So in the next lecture I'll show you how to boot into that and how to use it to install cubes as a main

42
00:03:02,000 --> 00:03:10,000
operating system or use it to install cubes on another USB stick so that we have a USB stick with a

43
00:03:10,000 --> 00:03:19,000
live cubes installation that we can use to use cubes on any supported computer regardless of what operating

44
00:03:19,000 --> 00:03:20,000
system it runs.