1 00:00:00,000 --> 00:00:01,000 Okay. 2 00:00:01,000 --> 00:00:07,000 So now that we configured our bias properly to boot into the USB stick that has the Cube's image. 3 00:00:07,000 --> 00:00:13,000 As you can see, we managed to successfully boot into cubes and we have the installer right here. 4 00:00:14,000 --> 00:00:17,000 So as you can see right now, we have two options. 5 00:00:17,000 --> 00:00:24,000 We can select the first option to go ahead and install cubes straight away, or we can go with the second 6 00:00:24,000 --> 00:00:31,000 option to test the hardware that we have first and then install cubes if everything is fine. 7 00:00:31,000 --> 00:00:33,000 So I'm going to go with the second option. 8 00:00:33,000 --> 00:00:38,000 So I'm going to press the down arrow and hit enter to first test the hardware that I have. 9 00:00:38,000 --> 00:00:42,000 And if everything is fine, we will go ahead and install cubes. 10 00:00:43,000 --> 00:00:44,000 Perfect. 11 00:00:44,000 --> 00:00:48,000 So we have the installer here, which means that we passed all the tests so far. 12 00:00:48,000 --> 00:00:51,000 Now the next steps are actually going to be pretty simple. 13 00:00:51,000 --> 00:00:54,000 First, it's asking us for the language. 14 00:00:54,000 --> 00:00:55,000 I'm going to keep it at English. 15 00:00:55,000 --> 00:00:58,000 You can change it to whatever language you want. 16 00:00:58,000 --> 00:01:01,000 So I'm just going to click on Continue here on the bottom. 17 00:01:01,000 --> 00:01:01,000 Right. 18 00:01:03,000 --> 00:01:07,000 Next, we have a window that allows us to change a number of settings. 19 00:01:07,000 --> 00:01:11,000 You can change the keyboard, the time, the language. 20 00:01:11,000 --> 00:01:13,000 I'm actually going to keep everything the same. 21 00:01:13,000 --> 00:01:21,000 The only thing that I want to change is under the system category in there, which is the installation 22 00:01:21,000 --> 00:01:22,000 destination. 23 00:01:23,000 --> 00:01:29,000 This is the location where Cubes is going to be installed to, and this is the only difference that 24 00:01:29,000 --> 00:01:35,000 I've always been talking about between installing cubes to us, a main operating system or installing 25 00:01:35,000 --> 00:01:37,000 it on a USB stick. 26 00:01:38,000 --> 00:01:44,000 So we're going to click on this to change the setting and this will show us a window that'll list all 27 00:01:44,000 --> 00:01:48,000 the storage devices connected to this computer. 28 00:01:48,000 --> 00:01:54,000 So the first storage device that I have there on the left, you can see the size of it is 931 gigabytes. 29 00:01:54,000 --> 00:01:58,000 This is the built in hard drive inside my computer. 30 00:01:58,000 --> 00:02:05,000 So if you want to install details on this hard drive as a main operating system on this computer, you'll 31 00:02:05,000 --> 00:02:07,000 need to select this hard drive. 32 00:02:08,000 --> 00:02:14,000 Alternatively, if you want to install cubes on a USB stick and then use it as a live operating system 33 00:02:14,000 --> 00:02:17,000 similar to what we were doing with tails. 34 00:02:17,000 --> 00:02:22,000 So you'll be able to connect it to any computer that supports cubes and use it on that computer. 35 00:02:22,000 --> 00:02:27,000 And then when you remove it, the computer will be back to using its default operating system. 36 00:02:28,000 --> 00:02:32,000 If you want to do this, then connect a second USB device to this computer. 37 00:02:32,000 --> 00:02:36,000 The minimum size of this USB device should be 32 gigabytes. 38 00:02:36,000 --> 00:02:43,000 As you can see, I have one connected to it and its size is actually 57 gigabytes, so it's over the 39 00:02:43,000 --> 00:02:43,000 minimum. 40 00:02:43,000 --> 00:02:49,000 So all I'm going to do right now is literally just click on the storage device that I want to install 41 00:02:49,000 --> 00:02:53,000 cubes to, which is my USB device right here. 42 00:02:53,000 --> 00:02:55,000 As you can see, it's ticked right now. 43 00:02:55,000 --> 00:02:59,000 So it's telling me that this is where Cubes is going to be installed to. 44 00:02:59,000 --> 00:03:06,000 And again, keep in mind that when you select a device in here, everything stored on this storage device 45 00:03:06,000 --> 00:03:09,000 will be removed and cubes will be installed there. 46 00:03:09,000 --> 00:03:14,000 So make sure you don't have anything important to you because it will be erased. 47 00:03:14,000 --> 00:03:18,000 So I'm going to click on down there on the top left. 48 00:03:18,000 --> 00:03:23,000 Now cubes by default will encrypt the storage device that you pick. 49 00:03:23,000 --> 00:03:27,000 So right now it's asking me for a passphrase to use for this. 50 00:03:27,000 --> 00:03:32,000 Encryption will be used in this password to unlock the storage device that we picked in the future when 51 00:03:32,000 --> 00:03:34,000 we want to use cubes. 52 00:03:35,000 --> 00:03:37,000 So I'm going to put my password in here. 53 00:03:38,000 --> 00:03:41,000 And I'm going to click on Save Passphrase. 54 00:03:42,000 --> 00:03:47,000 Now in general, you should go back to the main menu at this stage. 55 00:03:47,000 --> 00:03:51,000 In my case, the USB device that I picked is not formatted properly. 56 00:03:52,000 --> 00:03:55,000 I intentionally did this just in case you face this issue. 57 00:03:55,000 --> 00:03:58,000 So if you are back at the main window, this is perfect. 58 00:03:58,000 --> 00:04:03,000 If you got the same warning that I have right here, then follow what I'm going to do in order to properly 59 00:04:03,000 --> 00:04:07,000 format the storage device and install cubes on it. 60 00:04:07,000 --> 00:04:11,000 So we're going to click on Reclaim Space here at the bottom, right? 61 00:04:12,000 --> 00:04:14,000 We're going to click on Delete All. 62 00:04:15,000 --> 00:04:18,000 And we're going to click on Reclaim Space. 63 00:04:19,000 --> 00:04:20,000 And that's it. 64 00:04:20,000 --> 00:04:23,000 We're back at the main window and we're good to go. 65 00:04:23,000 --> 00:04:28,000 So we're going to click on Begin Installation on the bottom right here. 66 00:04:28,000 --> 00:04:32,000 Now, like I said, this will take some time, so be patient with it. 67 00:04:32,000 --> 00:04:37,000 It will even take longer time if you're installing it to a USB stick like I'm doing right now. 68 00:04:38,000 --> 00:04:43,000 So I'm going to pause the video and we'll resume once the installation is finished. 69 00:04:44,000 --> 00:04:44,000 Okay. 70 00:04:45,000 --> 00:04:47,000 So now the installation is complete. 71 00:04:47,000 --> 00:04:54,000 We will need to create a user in order to boot into cubes using the USB stick. 72 00:04:54,000 --> 00:04:57,000 So I'm going to click here on user creation. 73 00:04:59,000 --> 00:05:02,000 I'm going to set a username and then I'm going to set a password. 74 00:05:03,000 --> 00:05:05,000 And I'm going to click on Done. 75 00:05:08,000 --> 00:05:12,000 And right now I'm going to click on finish configuration on the bottom. 76 00:05:12,000 --> 00:05:12,000 Right. 77 00:05:14,000 --> 00:05:14,000 Okay. 78 00:05:14,000 --> 00:05:17,000 Now the configuration is complete. 79 00:05:17,000 --> 00:05:22,000 And as you can see here at the bottom, right, I can click on reboot to reboot the computer. 80 00:05:22,000 --> 00:05:30,000 And then if I keep the second USB stick connected to the computer, it will automatically boot into 81 00:05:30,000 --> 00:05:33,000 cubes because I change the boot order. 82 00:05:33,000 --> 00:05:40,000 Or if I disconnect all the USB sticks, it will boot into the default operating system that this computer 83 00:05:40,000 --> 00:05:41,000 runs on. 84 00:05:42,000 --> 00:05:44,000 So I'm going to click on Ridgewood. 85 00:05:45,000 --> 00:05:51,000 And as soon as the computer restarts, I will disconnect the first USB stick. 86 00:05:51,000 --> 00:05:59,000 This one, this is the one that I used to install the Cube's image and I kept the one, the second one, 87 00:05:59,000 --> 00:06:06,000 the bigger one, connected to the computer in order to boot into the Cubes operating system. 88 00:06:06,000 --> 00:06:10,000 And as you can see, it's automatically booting into cubes. 89 00:06:11,000 --> 00:06:15,000 So it's very important to distinguish between the two USB sticks. 90 00:06:15,000 --> 00:06:22,000 We use one of them in order to install cubes either to the built in hard drive as a main operating system 91 00:06:22,000 --> 00:06:24,000 or to another USB stick. 92 00:06:24,000 --> 00:06:31,000 And then if we installed it on another USB stick, the second one will be the one that we use when we 93 00:06:31,000 --> 00:06:35,000 want to boot into the actual operating system. 94 00:06:36,000 --> 00:06:39,000 Right now, it's booting into the operating system. 95 00:06:39,000 --> 00:06:40,000 Be patient with it. 96 00:06:41,000 --> 00:06:44,000 And as it's booting, as you can see, it's asking me for the disk password. 97 00:06:44,000 --> 00:06:50,000 This is the encryption passphrase that we chose when we installed cubes. 98 00:06:51,000 --> 00:06:58,000 So I'm going to enter it and hit enter and just wait for the operating system to start. 99 00:06:59,000 --> 00:07:04,000 Now we're going to click on Cubes or to set some final options. 100 00:07:04,000 --> 00:07:07,000 I'm going to keep everything to the default settings. 101 00:07:07,000 --> 00:07:13,000 You might want to enable this option if you want to download updates over the Tor network. 102 00:07:13,000 --> 00:07:16,000 I'm going to keep it unchecked because that will slow it down. 103 00:07:17,000 --> 00:07:22,000 Downloading updates is usually not bad, so you can just keep this unchecked. 104 00:07:22,000 --> 00:07:24,000 So I'm just going to click on Done. 105 00:07:25,000 --> 00:07:31,000 And wait for cubes to configure the virtual machines needed to run the whole operating system. 106 00:07:33,000 --> 00:07:34,000 Okay. 107 00:07:34,000 --> 00:07:37,000 So the configuration is finally complete now. 108 00:07:37,000 --> 00:07:43,000 This did take some time again and it actually seemed like it froze at some stage there. 109 00:07:43,000 --> 00:07:49,000 So you will get this during the installation process if it seems like it's stuck at a certain point, 110 00:07:49,000 --> 00:07:55,000 as long as the mouse is moving, then don't turn off the computer, just give it its time, be patient 111 00:07:55,000 --> 00:07:58,000 with it, and it should finish the installation. 112 00:07:59,000 --> 00:08:00,000 So now everything is done. 113 00:08:00,000 --> 00:08:04,000 I'm going to click on finish configuration here at the bottom. 114 00:08:04,000 --> 00:08:04,000 Right. 115 00:08:07,000 --> 00:08:07,000 On. 116 00:08:07,000 --> 00:08:07,000 Perfect. 117 00:08:07,000 --> 00:08:10,000 Now we have the normal login screen for cubes. 118 00:08:10,000 --> 00:08:16,000 So now in the future all you have to do is connect the second USB, stick to the computer that you want 119 00:08:16,000 --> 00:08:22,000 to boot cubes from, boot from USB, and you will get to the screen. 120 00:08:22,000 --> 00:08:25,000 You won't go through the configuration every time. 121 00:08:25,000 --> 00:08:29,000 So put the password that we said, hit enter. 122 00:08:30,000 --> 00:08:31,000 I'm perfect. 123 00:08:31,000 --> 00:08:35,000 Now we are inside the Cubes desktop. 124 00:08:35,000 --> 00:08:40,000 Now you can see this is very similar to a basic Linux interface. 125 00:08:40,000 --> 00:08:44,000 If you have some experience with that, you'll be able to easily navigate this. 126 00:08:44,000 --> 00:08:45,000 If you don't. 127 00:08:45,000 --> 00:08:46,000 Don't worry about it. 128 00:08:46,000 --> 00:08:49,000 We'll talk about it in details, in future lectures. 129 00:08:49,000 --> 00:08:56,000 But right now we finished installing cubes as a live operating system to a USB stick. 130 00:08:57,000 --> 00:09:05,000 Now to turn it off, we're going to go to the top right click on Shut Down and click on Shut Down Again. 131 00:09:07,000 --> 00:09:09,000 Now just to show you. 132 00:09:09,000 --> 00:09:16,000 So if I disconnect my second USB stick, this one right there, this is the one that we installed cubes 133 00:09:16,000 --> 00:09:17,000 to. 134 00:09:17,000 --> 00:09:20,000 So if I disconnect it and start my computer. 135 00:09:23,000 --> 00:09:29,000 You'll see that it's going to boot into windows into the operating system that it used to run before 136 00:09:29,000 --> 00:09:30,000 by default. 137 00:09:30,000 --> 00:09:37,000 So this is the whole point of installing cubes to a USB stick will be able to connect it to any computer 138 00:09:37,000 --> 00:09:41,000 that can run cubes, use cubes on that computer and what? 139 00:09:41,000 --> 00:09:46,000 And when we're done, the computer will be back to its original state and we'll be able to take this 140 00:09:46,000 --> 00:09:50,000 USB stick with us anywhere we want and use cubes from it.