1
00:00:00,970 --> 00:00:08,710
OK, we are aware of the intercept option inside of it, but we did also notice that there are other

2
00:00:08,710 --> 00:00:13,060
things here, such as intruder, repeater and others.

3
00:00:14,010 --> 00:00:15,540
What are those options?

4
00:00:16,200 --> 00:00:18,610
Well, they all have their own purpose.

5
00:00:19,140 --> 00:00:23,490
Let's first start by checking out this target's tab right here.

6
00:00:24,360 --> 00:00:31,920
So in this Target tab will be all the websites that we visited while having it as proxy in the current

7
00:00:31,920 --> 00:00:32,330
session.

8
00:00:32,790 --> 00:00:36,600
They will be listed in this left window right here.

9
00:00:37,860 --> 00:00:45,750
Let's give it a try, for example, if I go and visit Tesla Dotcom, let's first of all, make sure

10
00:00:45,750 --> 00:00:50,300
that intercept is turned off so we don't get stuck on a certain request.

11
00:00:50,310 --> 00:00:51,060
Turn it off.

12
00:00:51,570 --> 00:00:53,430
Go back to the target tab.

13
00:00:54,310 --> 00:01:01,210
And here are all the links that we visited once we tried to visit Tesla Dotcom in order for us to load

14
00:01:01,210 --> 00:01:07,480
Tesla dot com page, we had to send the request to all of these domains right here and somewhere in

15
00:01:07,480 --> 00:01:07,750
here.

16
00:01:07,750 --> 00:01:09,970
We should also see Tesla dot com.

17
00:01:10,360 --> 00:01:11,660
Let me check it out.

18
00:01:11,680 --> 00:01:12,540
Here it is.

19
00:01:12,550 --> 00:01:14,320
It's last in my case.

20
00:01:14,950 --> 00:01:21,700
And once you select it or once you select any of these links or domains in the window to the right,

21
00:01:22,090 --> 00:01:26,830
we will see all of the HTP requests that we performed with that website.

22
00:01:28,160 --> 00:01:33,670
Let's, for example, take a look at this first request, so this is the first request that we performed,

23
00:01:33,890 --> 00:01:43,580
it's us trying to get w w w teszler dot com and here the beheaders of our http get request for this

24
00:01:43,580 --> 00:01:44,030
page.

25
00:01:45,190 --> 00:01:51,270
If we wanted to check out the HTP response, we can take a look at this right window right here.

26
00:01:51,700 --> 00:01:54,430
This is the response to our HTP request.

27
00:01:55,240 --> 00:02:02,830
We can scroll all the way down and we will be able to see the HTML code of Teszler dot com page, which

28
00:02:02,830 --> 00:02:04,210
is this one right here.

29
00:02:05,460 --> 00:02:07,330
We can print it out like this.

30
00:02:08,070 --> 00:02:15,600
We can also take a look at the raw headers right here as well as the code, and we can also press the

31
00:02:15,600 --> 00:02:16,500
render option.

32
00:02:16,500 --> 00:02:19,890
And this will render the HTML code of that page.

33
00:02:19,890 --> 00:02:24,570
And we should be able to see the page right here in just a couple of seconds.

34
00:02:25,960 --> 00:02:33,280
And here it is now, it doesn't look quite that good as it does look right here, but nonetheless,

35
00:02:33,280 --> 00:02:34,690
it tried to render it.

36
00:02:35,780 --> 00:02:42,720
OK, now let's check out these actions right here, but let's check it out on our TV page.

37
00:02:42,830 --> 00:02:47,140
So let's visit our Alaskan BBWAA machine.

38
00:02:47,960 --> 00:02:51,290
Let's navigate once again to this Steve apage.

39
00:02:52,550 --> 00:02:59,780
And once it floats, let us first log out just in case, because we did log in last time we used this

40
00:02:59,780 --> 00:03:06,110
application, and if we go to our targets tab now, we should see somewhere our own virtual machine.

41
00:03:06,330 --> 00:03:08,270
And in my case, here it is.

42
00:03:08,540 --> 00:03:11,600
You should see just the IP address of your Auvers machine.

43
00:03:12,230 --> 00:03:16,520
And you can see once we have the render tab, it does render out the page for us.

44
00:03:17,240 --> 00:03:24,470
But let's go back to the printed response, which will give us the HTP response headers as well as the

45
00:03:24,470 --> 00:03:25,280
HTML code.

46
00:03:26,060 --> 00:03:29,570
Now let's try to find a request where we visit TV w a.

47
00:03:30,790 --> 00:03:33,050
And let's see it right here.

48
00:03:33,070 --> 00:03:35,380
I do believe it's this one.

49
00:03:35,650 --> 00:03:36,990
Let us check out.

50
00:03:37,930 --> 00:03:43,420
And if you don't want to scroll to all of these requests, what you can do is you can just turn on your

51
00:03:43,420 --> 00:03:47,290
intercept and specify once again, incorrect username and password.

52
00:03:47,530 --> 00:03:54,170
And once it intercept this request, you can click on action and let's go with repeater.

53
00:03:54,170 --> 00:03:56,260
Let's send to repeater.

54
00:03:57,260 --> 00:04:02,370
As soon as you click on that, you will see this repeater tab light up, it will become orange.

55
00:04:03,260 --> 00:04:10,220
So for now, we can turn off int., we can navigate to the repeater and there we should be able to see

56
00:04:10,490 --> 00:04:11,720
our request.

57
00:04:12,140 --> 00:04:12,890
Here it is.

58
00:04:13,640 --> 00:04:19,459
Now, what you can do with the repeater is you can send a certain request as many times as you want.

59
00:04:19,700 --> 00:04:26,480
For example, I can try to send this request and in the right we know we will get the response.

60
00:04:27,320 --> 00:04:29,840
Now, you might notice something weird right here.

61
00:04:29,870 --> 00:04:32,540
We're not getting the HTML code down here.

62
00:04:33,410 --> 00:04:34,830
So what does this mean?

63
00:04:35,150 --> 00:04:39,950
Well, if we take a look at this response a little bit better, we're going to see that we didn't get

64
00:04:39,950 --> 00:04:44,030
the code of two hundred, which means that the page loaded successfully.

65
00:04:44,450 --> 00:04:46,700
We got the code of three hundred and two.

66
00:04:47,360 --> 00:04:53,260
And once this happens, this usually means that you're about to get redirected to a certain page.

67
00:04:53,690 --> 00:05:00,680
In that case, we can click on this button, follow redirection and it will redirect us to the page.

68
00:05:01,220 --> 00:05:07,850
As we can see now, we have the HTML code and since we submitted the username and password of test,

69
00:05:08,150 --> 00:05:13,820
we get the log failed the message, which is the same message that we have right here, we specified

70
00:05:13,820 --> 00:05:15,380
incorrect username and password.

71
00:05:16,100 --> 00:05:19,670
So we can also do the same thing that we did with intercept.

72
00:05:19,700 --> 00:05:21,150
We can also do it in repeater.

73
00:05:21,170 --> 00:05:25,330
We can change the incorrect username and password to the correct username and password.

74
00:05:25,760 --> 00:05:30,560
For example, let's go to the intercept turned on.

75
00:05:31,990 --> 00:05:34,030
Let's forward these packets.

76
00:05:35,390 --> 00:05:41,510
Or let me just do it like this, I'm going to type test and then test, turn on the intercept.

77
00:05:42,570 --> 00:05:44,550
And click on login.

78
00:05:45,540 --> 00:05:54,810
Now, let me go and find this specific request for the TV page, and here it is now let's send it once

79
00:05:54,810 --> 00:05:55,890
again to the repeater.

80
00:05:56,820 --> 00:06:02,510
Turn off the intercept, go to the repeater, and here we will have once again this request.

81
00:06:02,700 --> 00:06:06,830
Now you can change any thing that you want in this request.

82
00:06:06,840 --> 00:06:14,460
For example, we can see the user agent tab right here that says Mozilla 5.0 and says the Linux version.

83
00:06:14,670 --> 00:06:16,890
It pretty much gives the information about us.

84
00:06:17,220 --> 00:06:24,090
And if you wanted to hide that information to the TV, a page and to our USB virtual machine, you can

85
00:06:24,090 --> 00:06:31,770
type, for example, that user agent is iPhone seven, for example, and leave it just like this.

86
00:06:31,980 --> 00:06:33,720
And this will get sent to the page.

87
00:06:34,560 --> 00:06:43,380
We can also change the correct details, I mean, correct usernames and passwords to admin and admin.

88
00:06:43,920 --> 00:06:48,150
And then we can send this request, remember that it will get redirected.

89
00:06:48,150 --> 00:06:54,470
So we must follow the redirection and now we shouldn't get that login failure.

90
00:06:54,960 --> 00:06:57,570
Instead, we should successfully log to the page.

91
00:06:57,570 --> 00:07:00,330
And if we go to render, it should render out.

92
00:07:00,360 --> 00:07:02,730
I logged in page, as we can see right here.

93
00:07:03,000 --> 00:07:04,770
Down here, it says user name is admin.

94
00:07:04,780 --> 00:07:08,220
So we successfully logged in, as it says, right here as well.

95
00:07:09,290 --> 00:07:15,610
You will also notice that the next request that we are about to send has the user agent of iPhone seven,

96
00:07:15,620 --> 00:07:17,810
so that is also something that we managed to change.

97
00:07:18,530 --> 00:07:19,730
How cool is that?

98
00:07:20,680 --> 00:07:28,540
OK, this is reporter, it is similar option as to intercept just here, it saves our HTP request.

99
00:07:28,840 --> 00:07:34,120
It allows us to modify it as we like and we send it as many times as we want.

100
00:07:34,870 --> 00:07:39,190
Then we can easily take a look at the response and render its HTML code.

101
00:07:39,190 --> 00:07:45,990
Right here in the next video, we will be checking out the intruder option, which is also really useful.

102
00:07:46,660 --> 00:07:47,710
See you in the next lecture.

