1
00:00:00,410 --> 00:00:02,690
So let's practice using SQS.

2
00:00:02,690 --> 00:00:04,390
So let's go into the SQS console,

3
00:00:04,390 --> 00:00:07,560
close this message and create a queue.

4
00:00:07,560 --> 00:00:09,570
So, when we create a queue in SQS,

5
00:00:09,570 --> 00:00:12,640
we'll see we have two choices, Standard and FIFO,

6
00:00:12,640 --> 00:00:14,330
and FIFO we'll see in it's own time.

7
00:00:14,330 --> 00:00:17,060
So, for now we'll just focus on Standard.

8
00:00:17,060 --> 00:00:18,640
Okay, now we have to name the queue.

9
00:00:18,640 --> 00:00:21,290
So I'll call this one DemoQueue,

10
00:00:21,290 --> 00:00:23,500
and we need to configure that queue.

11
00:00:23,500 --> 00:00:25,430
So the queue has a lot of parameters,

12
00:00:25,430 --> 00:00:28,650
we'll see the visibility timeout impact in the next lecture

13
00:00:28,650 --> 00:00:30,910
we'll see delay as well in the next lectures,

14
00:00:30,910 --> 00:00:33,080
we'll see this as well in the next lectures.

15
00:00:33,080 --> 00:00:34,710
A lot of things we'll see very soon.

16
00:00:34,710 --> 00:00:37,320
The message retention period is four days

17
00:00:37,320 --> 00:00:42,260
but we can set it anywhere between one minute and 14 days.

18
00:00:42,260 --> 00:00:43,770
So this is how long the message will stay

19
00:00:43,770 --> 00:00:45,720
in the queue waiting to be processed

20
00:00:45,720 --> 00:00:48,460
before being dropped automatically out of the queue.

21
00:00:48,460 --> 00:00:50,070
And the maximum message size as you can see,

22
00:00:50,070 --> 00:00:52,690
the very maximum is 256 kilobytes,

23
00:00:52,690 --> 00:00:57,570
but it could be anywhere between one kilobytes and 256.

24
00:00:57,570 --> 00:01:01,570
Okay, so next we have to define an access policy.

25
00:01:01,570 --> 00:01:04,540
And the access policy is who can access the queue.

26
00:01:04,540 --> 00:01:06,410
By default, we can...

27
00:01:06,410 --> 00:01:08,210
Only the queue owner can send a message

28
00:01:08,210 --> 00:01:10,420
to the queue and receive message from the queue.

29
00:01:10,420 --> 00:01:13,000
But you can, if you use these drop-down,

30
00:01:13,000 --> 00:01:15,470
you can set other accounts, roles,

31
00:01:15,470 --> 00:01:19,270
or IAM users that could send messages into the queue,

32
00:01:19,270 --> 00:01:22,040
which is very helpful if we do some integrations

33
00:01:22,040 --> 00:01:24,970
with Amazon S3 or Amazon SNS.

34
00:01:24,970 --> 00:01:27,790
But for now, we'll just keep it to only the queue owner.

35
00:01:27,790 --> 00:01:29,340
And if you knew what you're doing,

36
00:01:29,340 --> 00:01:30,230
you could just directly go

37
00:01:30,230 --> 00:01:33,560
and edit this JSON policy in-line,

38
00:01:33,560 --> 00:01:36,180
to say who can write to your SQ SQ.

39
00:01:36,180 --> 00:01:37,840
We'll use the basic one,

40
00:01:37,840 --> 00:01:38,740
but as you can see,

41
00:01:38,740 --> 00:01:40,580
this JSON policy right here,

42
00:01:40,580 --> 00:01:43,060
looks a lot like an S3 bucket policy

43
00:01:43,060 --> 00:01:44,610
because they have the same purpose.

44
00:01:44,610 --> 00:01:46,660
This is to define who can access,

45
00:01:46,660 --> 00:01:49,620
an Amazon SQ SQ if you do cross-account

46
00:01:49,620 --> 00:01:51,310
or different roles or stuff like that.

47
00:01:51,310 --> 00:01:53,030
Okay, so for now we'll keep it as basic.

48
00:01:53,030 --> 00:01:54,280
This is a basic hands on.

49
00:01:55,120 --> 00:01:57,890
Queue encryption is possible.

50
00:01:57,890 --> 00:02:01,620
So we have in-transit encryption enabled by default,

51
00:02:01,620 --> 00:02:03,430
but you can add at-rest encryption

52
00:02:03,430 --> 00:02:05,680
by enabling server-side encryption,

53
00:02:05,680 --> 00:02:07,910
in which case we have to choose a CMK.

54
00:02:07,910 --> 00:02:10,690
And so we can ensure the default CMK,

55
00:02:10,690 --> 00:02:13,580
or we can choose an alias if we create our own key.

56
00:02:13,580 --> 00:02:14,460
But for now, I'm just going

57
00:02:14,460 --> 00:02:16,160
to use the default CMK,

58
00:02:16,160 --> 00:02:19,240
to get encryption on this queue.

59
00:02:19,240 --> 00:02:21,280
And the data key reuse period is,

60
00:02:21,280 --> 00:02:22,900
how long the same data key should be used

61
00:02:22,900 --> 00:02:24,010
to encrypt the data.

62
00:02:24,010 --> 00:02:25,420
For now, you can just leave it as five minutes,

63
00:02:25,420 --> 00:02:26,610
this is fine.

64
00:02:26,610 --> 00:02:29,490
Okay, dead-letter queue we'll see as well later on.

65
00:02:29,490 --> 00:02:31,360
So let's create this queue.

66
00:02:31,360 --> 00:02:33,350
And now the queue is successfully created.

67
00:02:33,350 --> 00:02:37,200
So, we can go ahead and send and receive messages from it.

68
00:02:37,200 --> 00:02:40,410
So we get a lot of different panels in this UI.

69
00:02:40,410 --> 00:02:43,210
But what we want to be doing is to go

70
00:02:43,210 --> 00:02:44,960
to the top right-hand side

71
00:02:44,960 --> 00:02:48,260
and click on send and receive messages.

72
00:02:48,260 --> 00:02:51,310
So here is a facility for us to send messages

73
00:02:51,310 --> 00:02:53,420
and then at the bottom to receive them.

74
00:02:53,420 --> 00:02:54,870
So as we can see right now in the queue,

75
00:02:54,870 --> 00:02:56,970
we have zero messages available.

76
00:02:56,970 --> 00:03:01,970
But if I enter hello world in the message body,

77
00:03:02,040 --> 00:03:04,490
and then send the message.

78
00:03:04,490 --> 00:03:05,880
As you can see the message is sent,

79
00:03:05,880 --> 00:03:07,300
is ready to be received.

80
00:03:07,300 --> 00:03:09,930
Now we have a messages available one.

81
00:03:09,930 --> 00:03:13,530
And so in here, as soon as I click on poll for messages,

82
00:03:13,530 --> 00:03:15,410
the messages will appear.

83
00:03:15,410 --> 00:03:16,243
So let's have a look.

84
00:03:16,243 --> 00:03:17,690
I click on poll for messages,

85
00:03:17,690 --> 00:03:20,220
and yes, we did receive that message right here.

86
00:03:20,220 --> 00:03:21,780
As we can see, we have a message ID,

87
00:03:21,780 --> 00:03:24,800
and if you want to look at the content of the message,

88
00:03:24,800 --> 00:03:26,220
I click on the message details,

89
00:03:26,220 --> 00:03:28,180
and I can have some information.

90
00:03:28,180 --> 00:03:30,550
So there's a lot of metadata around that message.

91
00:03:30,550 --> 00:03:32,500
For example, the hash of the message,

92
00:03:32,500 --> 00:03:34,630
who sent it, how many times it were received.

93
00:03:34,630 --> 00:03:35,680
So just one time right now,

94
00:03:35,680 --> 00:03:36,513
because we have...

95
00:03:36,513 --> 00:03:38,190
This is the first time we posted this message,

96
00:03:38,190 --> 00:03:41,590
the size in bytes, and if we go and want

97
00:03:41,590 --> 00:03:43,420
to receive the body itself,

98
00:03:43,420 --> 00:03:45,970
we can see that whatever I sent before hello world,

99
00:03:45,970 --> 00:03:48,830
has ended up right here in the message I just read.

100
00:03:48,830 --> 00:03:51,330
If we created attributes for the message,

101
00:03:51,330 --> 00:03:54,900
there was a message attributes panel that we didn't look at,

102
00:03:54,900 --> 00:03:57,900
we could create key values and read them from here as well.

103
00:03:57,900 --> 00:03:59,560
So, very simple what you would expect,

104
00:03:59,560 --> 00:04:02,870
when you send a message and then read it,

105
00:04:02,870 --> 00:04:05,120
you get the exact same message.

106
00:04:05,120 --> 00:04:06,240
But we have decoupled

107
00:04:06,240 --> 00:04:08,960
because a producer has sent some information,

108
00:04:08,960 --> 00:04:11,889
and a consumer has received that information.

109
00:04:11,889 --> 00:04:14,680
Now we can see that the message has been received twice

110
00:04:14,680 --> 00:04:19,269
because we didn't process it in enough time.

111
00:04:19,269 --> 00:04:20,839
So after 30 seconds, the lowest,

112
00:04:20,839 --> 00:04:22,700
the message went back into the queue,

113
00:04:22,700 --> 00:04:24,470
and we received it again.

114
00:04:24,470 --> 00:04:26,220
So if I poll for messages,

115
00:04:26,220 --> 00:04:28,170
now the message received count is three.

116
00:04:28,170 --> 00:04:31,170
So it has been read, yet again another time.

117
00:04:31,170 --> 00:04:33,070
So to be done with this message,

118
00:04:33,070 --> 00:04:35,610
because say we've processed this hello world message,

119
00:04:35,610 --> 00:04:37,290
I'm going to click on it,

120
00:04:37,290 --> 00:04:39,620
and then I'm going to click on delete.

121
00:04:39,620 --> 00:04:41,840
And by deleting the message from the queue,

122
00:04:41,840 --> 00:04:44,720
we have signaled to the SQ SQ,

123
00:04:44,720 --> 00:04:46,970
that the message has been successfully processed.

124
00:04:46,970 --> 00:04:47,890
And therefore,

125
00:04:47,890 --> 00:04:50,570
we have zero messages available in the queue,

126
00:04:50,570 --> 00:04:52,640
and if we poll again,

127
00:04:52,640 --> 00:04:54,270
we will not receive the same message again

128
00:04:54,270 --> 00:04:56,200
because we have deleted it.

129
00:04:56,200 --> 00:04:58,070
So you start seeing the power of queues.

130
00:04:58,070 --> 00:04:59,740
We could go ahead and send,

131
00:04:59,740 --> 00:05:01,080
many times different messages,

132
00:05:01,080 --> 00:05:01,913
hello world, and so on,

133
00:05:01,913 --> 00:05:03,440
and you can just play with it,

134
00:05:03,440 --> 00:05:06,030
and this is how you would set message attributes,

135
00:05:06,030 --> 00:05:08,140
but this is out of scope for the exam.

136
00:05:08,140 --> 00:05:10,930
And here, you would receive these messages,

137
00:05:10,930 --> 00:05:13,030
and you can receive many messages at a time.

138
00:05:13,030 --> 00:05:14,535
So if we send hello world,

139
00:05:14,535 --> 00:05:16,380
we'll send that message again,

140
00:05:16,380 --> 00:05:18,680
and hello world 2, for example,

141
00:05:18,680 --> 00:05:21,730
and send that message, and hello world 3,

142
00:05:21,730 --> 00:05:23,390
whatever you want really in that message.

143
00:05:23,390 --> 00:05:26,973
As we can see, as soon as I refresh this window,

144
00:05:28,030 --> 00:05:30,510
we can see that the number of messages available is three.

145
00:05:30,510 --> 00:05:32,380
And so if I poll for messages,

146
00:05:32,380 --> 00:05:35,670
I will get three messages available in here,

147
00:05:35,670 --> 00:05:37,100
to be processed.

148
00:05:37,100 --> 00:05:38,860
And again, you can take them all

149
00:05:38,860 --> 00:05:41,140
and delete them to signal to SQS

150
00:05:41,140 --> 00:05:42,500
that they have been processed.

151
00:05:42,500 --> 00:05:44,320
So fairly easy, but you've seen the power

152
00:05:44,320 --> 00:05:47,070
of producers and consumers.

153
00:05:47,070 --> 00:05:48,490
Now back in the queue,

154
00:05:48,490 --> 00:05:49,530
with just a few options as well,

155
00:05:49,530 --> 00:05:50,440
we can see out.

156
00:05:50,440 --> 00:05:52,180
So we can edit this queue

157
00:05:52,180 --> 00:05:54,340
to edit all the configurations

158
00:05:54,340 --> 00:05:56,070
that we've seen from before.

159
00:05:56,070 --> 00:05:57,520
Or you can purge the queue,

160
00:05:57,520 --> 00:06:00,240
this will delete all the messages in the queue.

161
00:06:00,240 --> 00:06:01,780
And so to delete all the messages,

162
00:06:01,780 --> 00:06:03,400
you just need to type purge,

163
00:06:03,400 --> 00:06:04,900
and it will go ahead and remove everything,

164
00:06:04,900 --> 00:06:07,250
which is very helpful when you do developments.

165
00:06:07,250 --> 00:06:09,327
But I don't think you should do this in production.

166
00:06:09,327 --> 00:06:12,350
And then you get some information around monitoring,

167
00:06:12,350 --> 00:06:14,630
for example here, which gives you some information

168
00:06:14,630 --> 00:06:17,367
around how many messages are in the queue,

169
00:06:17,367 --> 00:06:19,790
what's the approximate age of the oldest message;

170
00:06:19,790 --> 00:06:22,170
which could be another way to scale your SQ SQ

171
00:06:22,170 --> 00:06:24,430
if you have an Auto Scaling group reading from it,

172
00:06:24,430 --> 00:06:25,263
and so on.

173
00:06:25,263 --> 00:06:27,100
And finally, access policy,

174
00:06:27,100 --> 00:06:30,110
which is who can access the queue and how

175
00:06:30,110 --> 00:06:32,160
and encryption we have enabled,

176
00:06:32,160 --> 00:06:34,240
which is saying we use this encryption key

177
00:06:34,240 --> 00:06:36,340
to encrypt the messages at-rest.

178
00:06:36,340 --> 00:06:38,290
So that's it for the overview of SQS.

179
00:06:38,290 --> 00:06:40,560
We'll have a look at a few more options in a second

180
00:06:40,560 --> 00:06:43,860
but I hope that by now you understand better how this works

181
00:06:43,860 --> 00:06:45,810
and I will see you in the next lecture.

