1
00:00:00,900 --> 00:00:06,240
All right, guys, now in this video, we're going to see about the file transfers, so first, if you

2
00:00:06,240 --> 00:00:12,600
got the shell from the commission, so there'll be some situations where you need to transfer the files

3
00:00:12,600 --> 00:00:13,510
from your car.

4
00:00:13,530 --> 00:00:15,660
Your next mission to the commission.

5
00:00:15,810 --> 00:00:22,590
So it was like a linchpin script or any other enumerations group which use you some other preregistration

6
00:00:22,590 --> 00:00:23,790
or some other advantage.

7
00:00:24,000 --> 00:00:32,640
So to transfer that file to the commission, you need to set up some servers in the corridor so that

8
00:00:32,640 --> 00:00:39,430
you can access the files with those clients in the, uh, with the mission.

9
00:00:39,840 --> 00:00:43,050
So first, what we want to do is we are going to install this.

10
00:00:43,560 --> 00:00:45,120
We have people in server.

11
00:00:49,650 --> 00:01:00,750
So Peiping, uh, should have been, shall we SFP peaty, so this is, uh, FPP server software, which

12
00:01:00,750 --> 00:01:07,890
is already installed in the current Linux and now run this, uh, previously before the out of the studio.

13
00:01:08,070 --> 00:01:10,160
And it has updated to the newer version.

14
00:01:11,640 --> 00:01:18,450
So one thing you need to change for this to release, you need to go to Sudan and all.

15
00:01:19,110 --> 00:01:24,090
I need to go to it, see and we to that configuration.

16
00:01:24,360 --> 00:01:29,260
So in this configuration file, you need to, uh, set this anonymously.

17
00:01:29,640 --> 00:01:30,570
And I will do.

18
00:01:31,170 --> 00:01:32,520
Yes, by default.

19
00:01:32,520 --> 00:01:39,720
It will be in the you need to set it to us so it will access the anonymous have to be that on the client

20
00:01:39,720 --> 00:01:44,040
and the victims personally will just simply download without any authentication.

21
00:01:44,580 --> 00:01:46,590
So that's what this setting is for.

22
00:01:46,600 --> 00:01:47,460
You put it as?

23
00:01:47,460 --> 00:01:49,100
Yes, by default it's not.

24
00:01:50,250 --> 00:01:51,840
So we need to start this.

25
00:01:51,900 --> 00:01:54,000
We have to release Sara.

26
00:01:55,020 --> 00:02:09,150
So need to to the service we use of the pre and start and he turned up OK of my years of Tripoli has

27
00:02:09,150 --> 00:02:10,170
been started.

28
00:02:10,440 --> 00:02:15,940
I will say this is, uh, this is my, uh, victims.

29
00:02:16,530 --> 00:02:21,470
Let's assume that and I can say fpp IP address of this mission.

30
00:02:25,040 --> 00:02:36,650
So you can see connected to the IP address, Sicari, so it's asking for the password, so it's not

31
00:02:36,650 --> 00:02:39,700
a problem because we know the password of this current execution.

32
00:02:39,890 --> 00:02:43,490
Maybe I should, uh, stop this and restart this.

33
00:02:43,780 --> 00:02:49,250
OK, it's not a problem because we know the of our current expansion rate, even though it's password

34
00:02:49,250 --> 00:02:50,870
is enabled.

35
00:02:51,200 --> 00:02:51,560
Sorry.

36
00:02:52,220 --> 00:02:55,130
Like a user need to enter the password.

37
00:02:55,160 --> 00:02:59,290
We know that our once carried our current IP address.

38
00:02:59,300 --> 00:03:07,600
So now you can say that you can read this first using this tab and you can see all the files here,

39
00:03:07,610 --> 00:03:18,500
you can see all the text and etc. and what you can do use you get all that, for example.

40
00:03:29,600 --> 00:03:38,230
So it's using a different binary and binary what is useful for transferring the binary data, like executables,

41
00:03:38,240 --> 00:03:39,300
Allfirst, et cetera.

42
00:03:40,610 --> 00:03:46,060
So that's one the user for the binary model.

43
00:03:46,580 --> 00:03:49,220
So you can get using this, uh, get comen.

44
00:03:50,830 --> 00:04:00,120
So let me close this one, so we have set up this FPP server and we are actually using this FPP crane.

45
00:04:01,120 --> 00:04:04,790
So that is one way and another matter is using the python, too.

46
00:04:05,110 --> 00:04:07,520
So there is a python and python three.

47
00:04:07,540 --> 00:04:08,530
There are two versions.

48
00:04:08,830 --> 00:04:14,620
You can start a simple UDP server on this directory, which you are running the command.

49
00:04:15,760 --> 00:04:17,860
So let me move to desktop.

50
00:04:19,750 --> 00:04:23,100
And if I say I am in the desktop, I have these files.

51
00:04:23,890 --> 00:04:35,350
So if I want to start the DP server on this folder, I need to sell Python to minus the module and the

52
00:04:35,350 --> 00:04:37,000
module name is simple.

53
00:04:38,300 --> 00:04:44,590
It should be a server only to the bottom, but two, one, two, three, four.

54
00:04:45,850 --> 00:04:48,160
So as you can see, serving that should be on the board.

55
00:04:48,440 --> 00:04:51,500
Are there other interfaces and the one, two, three, four.

56
00:04:51,790 --> 00:04:57,960
Now what I can do is I can go and say w get that IP address.

57
00:05:03,380 --> 00:05:09,500
The current put number, I need to specify the slash and then I need to switch the fighting if I want

58
00:05:09,500 --> 00:05:16,130
to download to this machine so I can simply sell dirty and if I download it.

59
00:05:19,360 --> 00:05:25,870
So as you can see, the door has been sealed for your last minutes earlier, you can see.

60
00:05:28,840 --> 00:05:29,410
OK.

61
00:05:31,240 --> 00:05:36,470
A big taste has been settled in the home for the previous food has been discovered.

62
00:05:36,940 --> 00:05:41,840
So this is the python to actually be thorough.

63
00:05:42,280 --> 00:05:48,850
So if the machine does not have Python to our it, it is having the python three and a python three

64
00:05:48,850 --> 00:05:51,880
minus its GDP that sarva.

65
00:05:54,390 --> 00:05:57,700
Knowledge, it's similar to the previous matter.

66
00:05:57,930 --> 00:06:04,010
It seems that we now, uh, for folder on this poll, number on the default.

67
00:06:04,290 --> 00:06:06,930
So the differences we are using pertain to a..

68
00:06:07,110 --> 00:06:12,700
In some cases, the victims machine may have done two, but not three.

69
00:06:12,750 --> 00:06:18,540
So in that case, you can run the python to early if, uh, there are.

70
00:06:18,540 --> 00:06:21,350
But, uh, there is no problem for the.

71
00:06:23,190 --> 00:06:26,610
So that is one way and another way is.

72
00:06:27,630 --> 00:06:33,750
We have already seen using the file transfer, using the network, I will just show you once more an

73
00:06:33,750 --> 00:06:43,440
ID card and we are going to listen on to one, two, three, four and take the input of the filename.

74
00:06:43,590 --> 00:06:45,720
We want to send a hash that

75
00:06:48,720 --> 00:07:01,440
I know I am in the home folder and also get my Nissan V. I would use my own local IP address and then

76
00:07:01,440 --> 00:07:04,270
I'm going connecting two, one, two, three, four.

77
00:07:05,640 --> 00:07:10,890
And I'm going to say it's a hash one dot.

78
00:07:18,710 --> 00:07:22,130
So now if I can control, I can control see?

79
00:07:25,460 --> 00:07:30,270
So if I said less minutes earlier, I regret this has nothing to.

80
00:07:30,920 --> 00:07:38,260
So this is a simple way for the Netcare and we have covered this FTB server, python server and network.

81
00:07:38,450 --> 00:07:52,520
And one more thing is, if you have access to that machine, you can use a as a separate hash and then

82
00:07:52,520 --> 00:07:57,670
you need to enter the user name after the A session you have the access to.

83
00:07:57,930 --> 00:08:06,470
If you know the username and password of the machine, that username is I'd been I need to address the

84
00:08:06,470 --> 00:08:07,010
IP address

85
00:08:10,160 --> 00:08:15,030
and then call in to send it to the destination.

86
00:08:15,440 --> 00:08:23,150
So this is stands for Secured Copy and we are copying from Pashupati, which is our own correct machine,

87
00:08:23,390 --> 00:08:29,260
to this admin address that with the machine and then the destination for the.

88
00:08:29,270 --> 00:08:31,430
So then it will ask for the password.

89
00:08:31,580 --> 00:08:37,500
And if you have access to login credentials, you can successfully transfer the files.

90
00:08:37,790 --> 00:08:42,950
So these are comes under Porche exploitation after you get the basic QA from the user.

91
00:08:43,730 --> 00:08:47,390
So these are the some common file transfer techniques.

92
00:08:48,200 --> 00:08:54,320
And if there are more techniques, we will recover in that we do at the right time and, uh, in the

93
00:08:54,320 --> 00:08:55,160
right situation.

94
00:08:55,640 --> 00:08:59,480
So that server this will be the basic method for the file transfer.

