1
00:00:00,180 --> 00:00:06,210
All right, let's talk about some network devices, first one we are going to see you have.

2
00:00:08,360 --> 00:00:14,550
So this connects computers and allows these computers for data transfer and for communication.

3
00:00:15,470 --> 00:00:18,730
And already there is one property for the hub.

4
00:00:18,770 --> 00:00:26,240
That is, if this computer wants to send one to send data to this computer, then it will transfer the

5
00:00:26,240 --> 00:00:27,160
data to this hub.

6
00:00:27,890 --> 00:00:35,410
And what this does is it will broadcast that message to every other computers.

7
00:00:36,260 --> 00:00:41,900
So it will send them that same, which is the message sent by this computer to this computer, to this

8
00:00:41,900 --> 00:00:50,180
computer and to this and to this, because it's the hub's property that that is the Hoppes job.

9
00:00:51,320 --> 00:00:58,310
And how we transfer since we can take these computers through a capabilities, but I like you can just

10
00:00:58,310 --> 00:01:04,160
support help contain some pots and you need to plug in the Ethernet cable to these ports.

11
00:01:04,460 --> 00:01:13,040
And if this computer one sends data to this computer, the hub transmits that message to every other

12
00:01:13,040 --> 00:01:16,250
computer, which is connected to the to the port.

13
00:01:17,360 --> 00:01:19,430
So this is very security issue, right.

14
00:01:19,820 --> 00:01:25,700
The because the message is being transmitted by password to every other computer to do so.

15
00:01:26,000 --> 00:01:34,340
So in general, organizations, these hubs are very rarely used and it's better not to use at all because

16
00:01:34,340 --> 00:01:41,840
if any other hacker with a laptop can connect the cable to the spot and can eavesdrop on the messages

17
00:01:41,840 --> 00:01:44,990
going on to this, going over these computers.

18
00:01:47,980 --> 00:01:55,810
So the improvement to the happy switch, it also allows the data transfer between our computers, but

19
00:01:56,350 --> 00:01:57,480
it is somewhat covert.

20
00:01:57,540 --> 00:02:06,340
And so we have learned about this computer and this computer have its own marketers and say these are

21
00:02:06,340 --> 00:02:08,910
devices, content, they're all Mercado's.

22
00:02:10,150 --> 00:02:19,160
Then if this computer wants to send a message to this computer first, it sends data to the switch.

23
00:02:20,020 --> 00:02:23,080
And this data contains the Mercado's.

24
00:02:23,080 --> 00:02:26,940
How this computer, then the switch does not know where to send.

25
00:02:27,280 --> 00:02:34,390
And this computer also don't know where to send this just since to this switch.

26
00:02:34,720 --> 00:02:41,740
And what switch does is at first time the switch transfers, transmits the message to all other devices

27
00:02:42,190 --> 00:02:49,900
and after transmitting to all of the devices, these devices respond to the switch, saying that this

28
00:02:49,900 --> 00:02:56,530
is not my Mac address and this my Macintosh is this one after sending.

29
00:02:58,350 --> 00:03:04,680
After getting response from all the devices, the switched notes, each and every device Mac address,

30
00:03:04,680 --> 00:03:07,080
and it was to be comfortable.

31
00:03:07,740 --> 00:03:11,210
I will be looking at this in the iReport video.

32
00:03:12,360 --> 00:03:19,740
So this which eventually learns Mac addresses of all devices connect to to the port.

33
00:03:20,610 --> 00:03:28,480
And then after getting all the Mac addresses from all the devices, then it will check the data for

34
00:03:28,500 --> 00:03:29,800
the Destination Mac address.

35
00:03:29,820 --> 00:03:39,600
And since this computer wants to send data to this computer and just it should send this data to this

36
00:03:39,600 --> 00:03:45,540
computer because their destination is this one right for you to access your help.

37
00:03:46,020 --> 00:03:52,830
And later on it learns the ah, the Mac addresses of the devices connect to it.

38
00:03:54,410 --> 00:03:58,220
So by this way, which is somewhat clever, then how?

39
00:04:00,250 --> 00:04:06,490
And the next one we need to see is Rotar, Rueter or Rotaru can as you wish.

40
00:04:07,420 --> 00:04:10,150
So what the what does this rotaries Rotar.

41
00:04:10,480 --> 00:04:12,760
And it was the wireless network.

42
00:04:13,660 --> 00:04:15,200
We are using the Wi-Fi in the phones.

43
00:04:15,220 --> 00:04:19,510
And one of the properties simulating that wireless network.

44
00:04:22,350 --> 00:04:31,830
And the most important job of a router is it connects different networks, so whenever we are sending

45
00:04:31,930 --> 00:04:41,250
a data to any other outside of our home network, then these router implement some routing items to

46
00:04:41,250 --> 00:04:45,420
find the best efficient path to reach the destination.

47
00:04:46,350 --> 00:04:49,690
So here is my daughter and my modem connected to the Internet.

48
00:04:49,920 --> 00:04:51,620
So this is another network.

49
00:04:51,960 --> 00:04:59,880
And if I want to send this data to another network, these rotors are compulsory and we have seen the

50
00:04:59,880 --> 00:05:00,390
switches.

51
00:05:00,750 --> 00:05:03,450
This we just were calling it Mercado's.

52
00:05:04,290 --> 00:05:13,070
And we cannot send the data only based on the backorders because there are so many factors out there.

53
00:05:13,110 --> 00:05:21,450
That's why this router improvements since that data to other devices based on IP addresses.

54
00:05:22,920 --> 00:05:28,950
And this Koetter also contains some BHB service, and it will assign the IP address to a particular

55
00:05:28,950 --> 00:05:29,390
device.

56
00:05:30,990 --> 00:05:41,310
So only two important things you need to know for first router include some wireless network and also

57
00:05:41,310 --> 00:05:47,970
it performs the routing algorithms and find the best and efficient, but further from further source

58
00:05:47,970 --> 00:05:48,720
to destination.

59
00:05:52,090 --> 00:05:59,510
And the next one is going to be the bridge, so bridge just connects two separate networks.

60
00:05:59,530 --> 00:06:04,420
So as you can see, there is a horse to be and have one and how to.

61
00:06:04,780 --> 00:06:07,870
And this bridge connects these two networks.

62
00:06:08,320 --> 00:06:17,190
So these bridges are used when there is some say Anakonda first building or an office.

63
00:06:17,500 --> 00:06:25,300
And if you want to connect to like seven different network to the network or to the telephone network,

64
00:06:25,660 --> 00:06:29,800
then you can just cannot simply run the cables over the roads.

65
00:06:29,830 --> 00:06:32,960
Right then in that case, bridges are very useful.

66
00:06:33,730 --> 00:06:42,340
So if you want to connect, if a member of 74 want to contact with the tenth floor, then you can just

67
00:06:42,340 --> 00:06:44,140
send a message through this bridge.

68
00:06:44,740 --> 00:06:53,980
These bridges are very helpful in connecting some different networks where the street and the last one

69
00:06:53,980 --> 00:06:55,570
were going to see is the repeater.

70
00:06:55,930 --> 00:07:00,680
So the reporter's job is to strengthen the signal.

71
00:07:01,420 --> 00:07:08,080
So I had the Wi-Fi and the way rain you saw was a few meters.

72
00:07:08,080 --> 00:07:13,150
And after that, fumigators, my signal gets lost or it weakens.

73
00:07:13,150 --> 00:07:13,410
Right.

74
00:07:13,840 --> 00:07:17,740
Then if I use distributer, this repeater strengthens that signal.

75
00:07:18,070 --> 00:07:23,230
And with this repeater, I can get away for some more distance.

76
00:07:24,040 --> 00:07:32,500
So this is use it when you want to access the network at speed and also at a long distance.

