1
00:00:00,150 --> 00:00:05,820
So in this video, we'll talk about the Tsipi versus the differences, and we are how we have already

2
00:00:05,820 --> 00:00:10,230
seen the TCP connection, establishment and connection termination in previous years.

3
00:00:10,800 --> 00:00:17,370
And this is a connection because the connection has to be established before sending the messages.

4
00:00:17,670 --> 00:00:22,680
And UDP is a diagram, protocol, disconnectedness, protocol.

5
00:00:25,320 --> 00:00:34,620
And this DCB ritual that I asked our patients and and Mrs. Transmeta segment boundaries where you diplomacies

6
00:00:34,620 --> 00:00:38,910
condensed that person one by one, it also takes integrity, either a relative.

7
00:00:39,270 --> 00:00:46,990
So basically, this is characteris protocol and for sending the messages, we need to initiate any connection.

8
00:00:47,160 --> 00:00:49,560
So we just send the data to the.

9
00:00:51,090 --> 00:00:59,500
This nation and this dispute, on the other hand, checks the integrity of every packet.

10
00:01:00,630 --> 00:01:08,220
So the spirit of the PXP is here because we need to check if each and every packet you sent is received

11
00:01:08,220 --> 00:01:09,730
correctly or not at the destination.

12
00:01:09,750 --> 00:01:10,020
So.

13
00:01:13,070 --> 00:01:16,750
And UDP is faster as recovery are ready to go to market.

14
00:01:16,820 --> 00:01:21,500
And so in Europe, you send the data with the.

15
00:01:26,160 --> 00:01:37,320
With the checksum, so there will to some it means the DA that us there will be algorithm to hash the

16
00:01:37,440 --> 00:01:44,080
data so that you to take something and you send the data analytics to the nation on the destination

17
00:01:44,130 --> 00:01:49,890
so it will receive the packet with the text and that data will be checked and rechecked somewhere that

18
00:01:49,890 --> 00:01:51,360
the data is corrupted or not.

19
00:01:51,660 --> 00:01:57,670
So what if the data does not Santa does not receive to the destination.

20
00:01:58,200 --> 00:02:06,650
So in that case, UDP is not much reliable because even that data can be lost in that network portrayed.

21
00:02:07,470 --> 00:02:17,350
So in Europe, the error code is not a it just sends the data, but their recovery is attempted.

22
00:02:17,910 --> 00:02:25,290
So I had to say that the top 20 words and I heard you repeat by UDP that eight points.

23
00:02:26,520 --> 00:02:33,880
So you can see the TCP has the handshake like Cincinnatian, and there is no handshake in that you repeat.

24
00:02:34,380 --> 00:02:41,220
Generally, this DCPI protocol is used in the tatting purposes, so you need to establish the connection

25
00:02:41,220 --> 00:02:44,010
first and you need to send the data.

26
00:02:44,610 --> 00:02:49,920
Generally, this protocol is used in the streaming purposes and also online games.

27
00:02:50,310 --> 00:02:54,630
So when you scream you re doing a YouTube even.

28
00:02:55,080 --> 00:03:00,080
There is so many lots of packets of data, but you do not get right.

29
00:03:00,540 --> 00:03:06,990
Even the YouTube video for something, you just wait for something and to see the packets.

30
00:03:07,530 --> 00:03:13,050
So in streaming purposes that Lassalle data is accepted.

31
00:03:13,050 --> 00:03:20,210
Right, that for that case you will be is preferred because the data is accepted.

32
00:03:20,460 --> 00:03:30,990
And if you use PXP for streaming purposes, even one if you read the video has before for the data,

33
00:03:31,140 --> 00:03:33,800
then you need to establish the communication again.

34
00:03:33,990 --> 00:03:38,390
So that will be recorded for every rosoff packet of data.

35
00:03:38,400 --> 00:03:39,130
That's right.

36
00:03:39,150 --> 00:03:42,630
For application purposes we will use TCP.

37
00:03:42,630 --> 00:03:43,080
Are you.

