1
00:00:01,170 --> 00:00:07,570
So in the studio, we're going to talk about those people in the program, so if you have two hundred

2
00:00:07,570 --> 00:00:16,710
thousand two hundred lines of court, if you want to check out the content, you this is the point of

3
00:00:17,340 --> 00:00:17,980
sale here.

4
00:00:18,180 --> 00:00:23,550
And then you print the will and you will see whether the program is going correctly or not.

5
00:00:24,330 --> 00:00:29,760
That's a basic way of determining any errors.

6
00:00:30,210 --> 00:00:38,330
And actually, it's very tough when you have long court like 300, 400 lines of code and tolerance of.

7
00:00:38,850 --> 00:00:47,760
And in that, uh, if you have those code and you just putting up shipments everywhere is very bad.

8
00:00:48,120 --> 00:00:51,220
And it's also time consuming and it's a waste.

9
00:00:51,360 --> 00:00:54,070
So that's why we need to be able to program.

10
00:00:54,090 --> 00:01:02,210
So what this means is you can stop the program at a certain point and you can inspect the contents up

11
00:01:02,220 --> 00:01:09,570
to that point, and then you can chip through the program called one one instruction per day.

12
00:01:10,590 --> 00:01:13,720
So now we are going to do this now quick on this here.

13
00:01:13,740 --> 00:01:20,370
There is a place and it has a hidden section, but there is the bug and this is the debugger.

14
00:01:20,580 --> 00:01:28,000
And if you click on this sideboard open and click on this romantical and it will ask what to do with

15
00:01:28,030 --> 00:01:29,570
that file.

16
00:01:29,640 --> 00:01:34,620
So we need to see this pattern, currently active python working on this one.

17
00:01:35,820 --> 00:01:37,900
And you can see there are some controls here.

18
00:01:38,520 --> 00:01:40,330
So this one is the pause button.

19
00:01:41,700 --> 00:01:42,100
OK.

20
00:01:42,360 --> 00:01:47,730
Now, this program has been executed directly because we did not set the breakpoint.

21
00:01:48,000 --> 00:01:55,760
So this breakpoint, whenever it was hit by the Python interpreter, the program for us stops.

22
00:01:56,310 --> 00:01:57,380
Sorry, sir.

23
00:01:58,050 --> 00:02:04,610
I'm going to set the breakpoint just before this for you can set the breakpoint here.

24
00:02:05,590 --> 00:02:12,300
Uh, you can see the, uh, right to this box and you can see there is a column and you can set the

25
00:02:12,780 --> 00:02:15,050
red dot and it says Bridgepoint.

26
00:02:15,390 --> 00:02:19,790
Now, what I want to do is I want to run this now program and execute this line.

27
00:02:19,890 --> 00:02:24,400
But at starting up this right, it will wait for it to execute.

28
00:02:24,810 --> 00:02:28,390
So we need to manually step through this are the order of the court.

29
00:02:28,740 --> 00:02:29,700
Now, let me run.

30
00:02:29,700 --> 00:02:32,130
And David, going on despite pattern.

31
00:02:37,630 --> 00:02:44,160
Now, as you can see, there is a little color line indicating that the U.S. is going to be this one,

32
00:02:44,620 --> 00:02:52,270
and if you expand here, we got the local news that is Al Elizalde, and it is a variable containing

33
00:02:52,270 --> 00:02:57,650
the values of this, uh, content of any of these values.

34
00:02:58,270 --> 00:03:05,530
So you can see l can condense all this, uh, function variables and you can see index on and all those

35
00:03:05,530 --> 00:03:06,070
variables.

36
00:03:06,430 --> 00:03:09,340
Now, what you want is I want to do this program.

37
00:03:09,340 --> 00:03:11,510
I want to execute for only once.

38
00:03:11,860 --> 00:03:14,590
So these are the controls.

39
00:03:14,590 --> 00:03:16,150
I can control the program.

40
00:03:16,630 --> 00:03:19,890
So if you click on this continues, the program continues to the end.

41
00:03:20,410 --> 00:03:23,510
And if there is any breakpoint, then it will stop there.

42
00:03:24,040 --> 00:03:26,160
And this one is a step over.

43
00:03:26,680 --> 00:03:30,040
If you don't want to hear this one, you can step over this.

44
00:03:32,080 --> 00:03:38,120
If there is a function here and you're going to step over the function, you need not go to this function.

45
00:03:38,440 --> 00:03:42,490
So if you want to step into it, we step exactly one instruction.

46
00:03:42,640 --> 00:03:48,760
And if you are reading inside the thousand lines of code of a function, then if you want to step out

47
00:03:48,760 --> 00:03:53,030
of that function, you can see what this is, the restart and this is a stop.

48
00:03:53,410 --> 00:03:57,430
Now, I'm going to step into now this instruction gets a good.

49
00:03:59,060 --> 00:04:01,560
Now, if you can see, I bet you used.

50
00:04:02,600 --> 00:04:11,420
And next U.S., I am going to print it and it is going to be if I click on this, uh, step into print

51
00:04:11,420 --> 00:04:19,530
of a love I love, that is now a we get printed, as you can see, the output.

52
00:04:19,970 --> 00:04:22,610
The city certainly can also see the cards stacked here.

53
00:04:24,380 --> 00:04:31,970
And now we are going to use this again because it will exist until the end of this, uh, list.

54
00:04:33,170 --> 00:04:37,100
Now, I'm going to go this step into step again.

55
00:04:37,310 --> 00:04:43,570
You can see the second world now in that same way, you can print out the elements, step into step

56
00:04:43,580 --> 00:04:46,810
in twos and step two times to print one element.

57
00:04:47,750 --> 00:04:56,300
And now this condition is going to be checked Ivory's fight and then tough and off.

58
00:04:56,300 --> 00:05:00,900
This list is six and this is it we take with.

59
00:05:01,280 --> 00:05:06,890
So, no, it will get out of this for now.

60
00:05:06,890 --> 00:05:14,090
As you can see, this instruction pointer is pointing to is crucial to know if you go a step into this,

61
00:05:14,420 --> 00:05:17,450
we can see a new word has been added, easy to do.

62
00:05:17,810 --> 00:05:20,110
And if we step through this again, we use too far.

63
00:05:20,570 --> 00:05:27,380
Now, the if condition is going to be it is going to be close to find if you are greater than be.

64
00:05:27,650 --> 00:05:34,310
So it is not going to be that way to pass to the next condition to step into this.

65
00:05:34,310 --> 00:05:41,210
You can see this statement is not executed because he he's not resentful against each other.

66
00:05:41,210 --> 00:05:45,950
Is course to be A and B are both equally into this now.

67
00:05:45,950 --> 00:05:47,600
It will get out of this.

68
00:05:47,630 --> 00:05:55,430
Uh, it is wrong because these two conditions fail and of course, is will execute every condition other

69
00:05:55,430 --> 00:05:56,060
than this one.

70
00:05:56,810 --> 00:05:58,250
And I will go to print nothing.

71
00:05:59,430 --> 00:05:59,900
I will.

72
00:05:59,900 --> 00:06:02,840
As you can see, our program director has been closed.

73
00:06:03,410 --> 00:06:04,910
So that's sad about this.

74
00:06:05,750 --> 00:06:06,860
I hope you have understood.

75
00:06:07,340 --> 00:06:16,730
So don't worry, I will include, uh, uh, this Windows expert and also assembly language.

76
00:06:16,730 --> 00:06:19,250
Then you will get much more idea of debugging.

77
00:06:19,460 --> 00:06:21,530
But this is generally the high level.

78
00:06:22,190 --> 00:06:27,400
You just put the breakpoint over here and then you step into this program.

79
00:06:29,000 --> 00:06:30,500
Now, I want to show you this.

80
00:06:30,500 --> 00:06:37,310
I will also say that if before if I am going to run any current pattern for.

81
00:06:40,260 --> 00:06:41,790
So now I'm going to.

82
00:06:44,230 --> 00:06:54,590
On this one, I'm getting three values, so now if I want to leave out of this, I can just simply continue

83
00:06:55,010 --> 00:06:59,490
and continue will go on continuing our or the core.

84
00:06:59,510 --> 00:07:02,040
And if there are any requirements, it will stop there.

85
00:07:02,090 --> 00:07:03,590
Now, let's continue.

86
00:07:10,410 --> 00:07:19,830
So at this point, OK, no, as you can see out the open then it has been, uh, program has been paused

87
00:07:19,840 --> 00:07:21,950
here because this is the breakpoint point.

88
00:07:22,170 --> 00:07:24,330
I continue here, the program.

89
00:07:24,330 --> 00:07:29,480
Just print out the print and I nothing just continuing the program.

90
00:07:30,930 --> 00:07:39,450
So that's what I hope we have understood that in the breakpoints and, uh, skipping through the program

91
00:07:39,540 --> 00:07:40,630
that sorry about that.

92
00:07:41,490 --> 00:07:42,590
This is very important.

93
00:07:42,600 --> 00:07:49,700
And when you have written so much lines of code and then worrying about the, uh, available input,

94
00:07:50,730 --> 00:07:54,930
so this debugging is used for, uh, solving these logical errors.

