WEBVTT

00:00:00.000 --> 00:00:03.610 align:middle line:90%


00:00:03.610 --> 00:00:06.340 align:middle line:84%
This has been
footprinting and scanning.

00:00:06.340 --> 00:00:09.370 align:middle line:84%
I've been your
instructor Joshua Mason.

00:00:09.370 --> 00:00:13.690 align:middle line:84%
And in this whole
section, we've covered

00:00:13.690 --> 00:00:17.440 align:middle line:84%
what you need to
know to understand

00:00:17.440 --> 00:00:22.630 align:middle line:84%
why port scanning and network
host discovery exists.

00:00:22.630 --> 00:00:27.370 align:middle line:84%
And hopefully you're able to
do it a little bit on your own.

00:00:27.370 --> 00:00:29.890 align:middle line:84%
Again, we want to think
like the adversary--

00:00:29.890 --> 00:00:34.550 align:middle line:84%
what our value is
doing and what do

00:00:34.550 --> 00:00:38.390 align:middle line:84%
we need to do in order to either
emulate them in a useful way

00:00:38.390 --> 00:00:43.640 align:middle line:84%
during a penetration test or
if we're thinking about it

00:00:43.640 --> 00:00:45.980 align:middle line:84%
from a defensive
standpoint, what

00:00:45.980 --> 00:00:48.200 align:middle line:90%
do we need to block against.

00:00:48.200 --> 00:00:52.440 align:middle line:84%
We've seen some good examples of
some evasion by changing ports.

00:00:52.440 --> 00:00:55.010 align:middle line:84%
We've seen some good
examples of evasion

00:00:55.010 --> 00:00:59.243 align:middle line:90%
by blocking ARP and ping.

00:00:59.243 --> 00:01:01.410 align:middle line:84%
Those are the sorts of
things you want to implement.

00:01:01.410 --> 00:01:04.790 align:middle line:84%
And if we're on an attacking
side, if you know machine is up

00:01:04.790 --> 00:01:06.740 align:middle line:84%
and they don't respond
to those and you

00:01:06.740 --> 00:01:08.940 align:middle line:84%
can't find the ports
in the standard place,

00:01:08.940 --> 00:01:12.410 align:middle line:84%
make sure to be very
thorough in your enumeration.

00:01:12.410 --> 00:01:15.530 align:middle line:84%
We're going to get into
that in later sections.

00:01:15.530 --> 00:01:17.520 align:middle line:84%
Once we understand
what the services are,

00:01:17.520 --> 00:01:19.700 align:middle line:84%
we can then start looking
up and seeing if there are

00:01:19.700 --> 00:01:21.140 align:middle line:90%
vulnerabilities that are known.

00:01:21.140 --> 00:01:23.730 align:middle line:90%


00:01:23.730 --> 00:01:25.230 align:middle line:84%
So I'm going to
leave you with that.

00:01:25.230 --> 00:01:28.020 align:middle line:90%
One last thing, this disclaimer.

00:01:28.020 --> 00:01:31.020 align:middle line:84%
We're touching machines
and if it's not yours,

00:01:31.020 --> 00:01:34.020 align:middle line:84%
don't touch it unless you've
been given permission.

00:01:34.020 --> 00:01:37.570 align:middle line:84%
That's the last I'm
going to say about that.

00:01:37.570 --> 00:01:40.040 align:middle line:84%
Thank you and I'll
see you in the next.

00:01:40.040 --> 00:01:41.000 align:middle line:90%