WEBVTT

00:00:00.000 --> 00:00:10.200 align:middle line:90%


00:00:10.200 --> 00:00:12.000 align:middle line:90%
Reverse Shell Cheatsheet.

00:00:12.000 --> 00:00:14.820 align:middle line:84%
In this video, I'll be taking
you through various resources

00:00:14.820 --> 00:00:17.310 align:middle line:84%
that you can use,
more specifically

00:00:17.310 --> 00:00:21.300 align:middle line:84%
cheatsheets that you can use
to, essentially, obtain code

00:00:21.300 --> 00:00:24.000 align:middle line:84%
that can be executed
on the target system

00:00:24.000 --> 00:00:27.540 align:middle line:84%
to connect back to
a Netcat listener.

00:00:27.540 --> 00:00:30.960 align:middle line:84%
All right, so as I mentioned
in the previous videos,

00:00:30.960 --> 00:00:33.240 align:middle line:84%
or more specifically
in the previous video

00:00:33.240 --> 00:00:36.840 align:middle line:84%
where I was explaining
what a reverse shell is,

00:00:36.840 --> 00:00:39.750 align:middle line:84%
one of the great features
or one of the great things

00:00:39.750 --> 00:00:42.630 align:middle line:84%
about reverse shells
is that you do not

00:00:42.630 --> 00:00:45.390 align:middle line:84%
need to have Netcat
or a Netcat listener

00:00:45.390 --> 00:00:47.880 align:middle line:90%
on the actual target system.

00:00:47.880 --> 00:00:51.630 align:middle line:84%
The connection to the Netcat
listener on the attacker system

00:00:51.630 --> 00:00:55.470 align:middle line:84%
can be made through the
use of PowerShell code.

00:00:55.470 --> 00:00:58.350 align:middle line:84%
You can do it with
simple bash code

00:00:58.350 --> 00:01:02.400 align:middle line:90%
or just Python code, C code.

00:01:02.400 --> 00:01:04.680 align:middle line:84%
You can also
generate executables

00:01:04.680 --> 00:01:07.110 align:middle line:84%
that will connect to
that particular listener

00:01:07.110 --> 00:01:09.360 align:middle line:84%
and provide you with
a reverse shell.

00:01:09.360 --> 00:01:11.700 align:middle line:84%
And you don't need
to rely on Netcat

00:01:11.700 --> 00:01:13.180 align:middle line:90%
to initiate the connection.

00:01:13.180 --> 00:01:14.970 align:middle line:84%
So that's really
what I'm going to be

00:01:14.970 --> 00:01:16.210 align:middle line:90%
highlighting in this video.

00:01:16.210 --> 00:01:20.040 align:middle line:84%
So again, just to go
through the process,

00:01:20.040 --> 00:01:22.680 align:middle line:84%
I'm going to be performing
or demonstrating

00:01:22.680 --> 00:01:24.270 align:middle line:84%
all the techniques
within this video,

00:01:24.270 --> 00:01:26.260 align:middle line:90%
within my own lab environment.

00:01:26.260 --> 00:01:29.220 align:middle line:84%
So there isn't a lab environment
attached to this video.

00:01:29.220 --> 00:01:30.667 align:middle line:84%
The reason for
that is, again, I'm

00:01:30.667 --> 00:01:32.250 align:middle line:84%
just going through
resources, and I'll

00:01:32.250 --> 00:01:36.870 align:middle line:84%
give you a simple example of
how to utilize these cheatsheets

00:01:36.870 --> 00:01:38.460 align:middle line:84%
or tools that I'll
be highlighting.

00:01:38.460 --> 00:01:41.460 align:middle line:84%
So I'll just switch over
to my Kali Linux VM,

00:01:41.460 --> 00:01:43.095 align:middle line:84%
and I'll take you
through the process.

00:01:43.095 --> 00:01:45.800 align:middle line:90%


00:01:45.800 --> 00:01:48.530 align:middle line:84%
All right, so I'm currently
in my Kali Linux VM,

00:01:48.530 --> 00:01:50.720 align:middle line:84%
and these are the
two resources that I

00:01:50.720 --> 00:01:52.707 align:middle line:90%
wanted to share with you.

00:01:52.707 --> 00:01:54.290 align:middle line:84%
And these are resources
that are going

00:01:54.290 --> 00:01:56.390 align:middle line:84%
to be extremely
beneficial to you

00:01:56.390 --> 00:02:00.110 align:middle line:84%
as you get into a
penetration testing career.

00:02:00.110 --> 00:02:03.320 align:middle line:84%
So the first resource
is a GitHub repository

00:02:03.320 --> 00:02:05.840 align:middle line:84%
called swissky repo, and
the repository in question

00:02:05.840 --> 00:02:07.820 align:middle line:90%
is PayloadAllTheThings.

00:02:07.820 --> 00:02:10.729 align:middle line:84%
Under the PayloadAllTheThings
repository,

00:02:10.729 --> 00:02:12.530 align:middle line:84%
on the methodology
and resources,

00:02:12.530 --> 00:02:15.530 align:middle line:84%
you'll find a file or markdown
file called Reverse Shell

00:02:15.530 --> 00:02:18.920 align:middle line:84%
Cheatsheet that essentially
contains a list of commands

00:02:18.920 --> 00:02:23.120 align:middle line:84%
or code that can be used
to connect back to a Netcat

00:02:23.120 --> 00:02:27.860 align:middle line:84%
listener after being executed
on the target system.

00:02:27.860 --> 00:02:29.780 align:middle line:84%
And in terms of
the target system,

00:02:29.780 --> 00:02:32.690 align:middle line:84%
there are various
cheatsheets are based

00:02:32.690 --> 00:02:34.350 align:middle line:90%
on the target operating system.

00:02:34.350 --> 00:02:38.000 align:middle line:84%
So for example, if the target
operating system is Linux,

00:02:38.000 --> 00:02:40.040 align:middle line:90%
you can click on Bash TCP.

00:02:40.040 --> 00:02:44.000 align:middle line:84%
And all you need to do
is execute this code here

00:02:44.000 --> 00:02:45.450 align:middle line:90%
on the target system.

00:02:45.450 --> 00:02:48.560 align:middle line:84%
And again, this code
can be executed manually

00:02:48.560 --> 00:02:50.600 align:middle line:84%
by physically
accessing the system

00:02:50.600 --> 00:02:53.150 align:middle line:90%
or through social engineering.

00:02:53.150 --> 00:02:56.810 align:middle line:84%
This can be essentially be
embedded into a payload,

00:02:56.810 --> 00:02:58.800 align:middle line:90%
so on, and so forth.

00:02:58.800 --> 00:03:01.280 align:middle line:84%
And of course, in
most cases, this code

00:03:01.280 --> 00:03:04.230 align:middle line:84%
is typically included
as part of exploit code.

00:03:04.230 --> 00:03:06.200 align:middle line:84%
So once a vulnerability
has been exploited,

00:03:06.200 --> 00:03:09.740 align:middle line:84%
the following code is
executed on the target system.

00:03:09.740 --> 00:03:13.250 align:middle line:84%
And then, it's executed,
and then the connection

00:03:13.250 --> 00:03:15.800 align:middle line:84%
is made back to the
attacker's system

00:03:15.800 --> 00:03:19.140 align:middle line:84%
or to the Netcat listener
on the attacker system.

00:03:19.140 --> 00:03:22.320 align:middle line:84%
So you can see
that, in this case,

00:03:22.320 --> 00:03:24.260 align:middle line:84%
the information that
needs to be changed

00:03:24.260 --> 00:03:28.520 align:middle line:84%
is you need to substitute
this value with your own IP

00:03:28.520 --> 00:03:30.020 align:middle line:90%
address as the attacker.

00:03:30.020 --> 00:03:32.570 align:middle line:84%
And you can then
specify the port

00:03:32.570 --> 00:03:35.000 align:middle line:84%
on which the netcar
listener is running,

00:03:35.000 --> 00:03:36.150 align:middle line:90%
and that's pretty much it.

00:03:36.150 --> 00:03:40.430 align:middle line:84%
So that's an example
of a very cool command

00:03:40.430 --> 00:03:43.100 align:middle line:84%
that you can run
for Linux targets.

00:03:43.100 --> 00:03:45.560 align:middle line:84%
In terms of Windows,
as I said, you're

00:03:45.560 --> 00:03:48.840 align:middle line:84%
pretty much limited
to only two options.

00:03:48.840 --> 00:03:50.985 align:middle line:84%
You can either utilize
PowerShell code.

00:03:50.985 --> 00:03:52.610 align:middle line:84%
So for example, if
this PowerShell code

00:03:52.610 --> 00:03:55.460 align:middle line:84%
is executed on the target,
it will connect back

00:03:55.460 --> 00:03:56.840 align:middle line:90%
to our Netcat listener.

00:03:56.840 --> 00:03:59.480 align:middle line:84%
And as I said, there isn't
a reliance on Netcat,

00:03:59.480 --> 00:04:03.020 align:middle line:84%
and the target system does not
have to have Netcat installed.

00:04:03.020 --> 00:04:06.140 align:middle line:84%
And PowerShell is very powerful
because every Windows system

00:04:06.140 --> 00:04:08.750 align:middle line:84%
comes with PowerShell
and the ability

00:04:08.750 --> 00:04:10.580 align:middle line:90%
to execute PowerShell code.

00:04:10.580 --> 00:04:13.890 align:middle line:90%
So that's one of the techniques.

00:04:13.890 --> 00:04:18.079 align:middle line:84%
Now, if the target is a Linux
target or even a Windows target

00:04:18.079 --> 00:04:20.240 align:middle line:84%
and has Python
installed, then you also

00:04:20.240 --> 00:04:23.190 align:middle line:84%
have Python code that will
essentially connect to a Netcat

00:04:23.190 --> 00:04:27.230 align:middle line:84%
listener, and all you need to do
is just substitute this IP here

00:04:27.230 --> 00:04:31.670 align:middle line:84%
with your Kali Linux IP
or the attacker system IP,

00:04:31.670 --> 00:04:35.030 align:middle line:84%
and then specify the port on
which your Netcat listener is

00:04:35.030 --> 00:04:35.720 align:middle line:90%
running.

00:04:35.720 --> 00:04:38.790 align:middle line:84%
So again, this is a really,
really helpful resource.

00:04:38.790 --> 00:04:43.910 align:middle line:84%
And again, it's not limited
to just operating systems.

00:04:43.910 --> 00:04:46.890 align:middle line:84%
If you're targeting or
exploiting a web application,

00:04:46.890 --> 00:04:50.640 align:middle line:84%
you also have PhP reverse
shells right over here.

00:04:50.640 --> 00:04:54.800 align:middle line:84%
So you can see that if this
code is executed, you can--

00:04:54.800 --> 00:04:57.080 align:middle line:90%
let's use this example here.

00:04:57.080 --> 00:05:01.430 align:middle line:84%
This code can be executed with
PhP, and it'll essentially--

00:05:01.430 --> 00:05:02.870 align:middle line:84%
you can see right
over here, it's

00:05:02.870 --> 00:05:05.780 align:middle line:84%
going to connect to the target
or rather the attacker's

00:05:05.780 --> 00:05:09.650 align:middle line:84%
system, and then executes
bin bash or bin/sh,

00:05:09.650 --> 00:05:12.800 align:middle line:84%
and you obtain a
reverse shell session.

00:05:12.800 --> 00:05:15.620 align:middle line:84%
Now, the other resource
that's fantastic,

00:05:15.620 --> 00:05:18.050 align:middle line:84%
and one that I recommend
that you take a look at

00:05:18.050 --> 00:05:21.590 align:middle line:84%
is one called reverse
shell generator,

00:05:21.590 --> 00:05:25.790 align:middle line:84%
and it's accessible
under revshells.com.

00:05:25.790 --> 00:05:28.160 align:middle line:84%
And you can see the
interface is very simple.

00:05:28.160 --> 00:05:32.330 align:middle line:84%
Number one, you need to specify
the IP address of the attacker

00:05:32.330 --> 00:05:32.850 align:middle line:90%
system.

00:05:32.850 --> 00:05:35.270 align:middle line:84%
So your Kali Linux or
pen testing distribution

00:05:35.270 --> 00:05:36.600 align:middle line:90%
IP address.

00:05:36.600 --> 00:05:40.010 align:middle line:84%
And then, the port on which
the Netcat listener is running.

00:05:40.010 --> 00:05:41.910 align:middle line:84%
In my case, I've
already done that.

00:05:41.910 --> 00:05:45.770 align:middle line:84%
So you just need to change
it up to your own IP address.

00:05:45.770 --> 00:05:47.390 align:middle line:84%
On the right, you
have your listener.

00:05:47.390 --> 00:05:51.260 align:middle line:84%
So, again, instead of using
only Netcat as your listener,

00:05:51.260 --> 00:05:56.000 align:middle line:84%
you can also use ncat, rustcat,
pwncat, socat, et cetera.

00:05:56.000 --> 00:05:58.460 align:middle line:84%
Of course, we're not going
to be exploring these--

00:05:58.460 --> 00:06:01.610 align:middle line:84%
we're not going to be exploring
any of these other alternatives

00:06:01.610 --> 00:06:02.450 align:middle line:90%
in this course.

00:06:02.450 --> 00:06:05.810 align:middle line:84%
That's something that we'll
be exploring in the future.

00:06:05.810 --> 00:06:08.060 align:middle line:84%
So yeah, in this case, we're
just going to use Netcat,

00:06:08.060 --> 00:06:10.310 align:middle line:84%
and it gives you
the actual command

00:06:10.310 --> 00:06:13.620 align:middle line:84%
to set up the Netcat listener
based on the report that you

00:06:13.620 --> 00:06:14.970 align:middle line:90%
have specified right over here.

00:06:14.970 --> 00:06:16.387 align:middle line:84%
So again, if you
change this port,

00:06:16.387 --> 00:06:17.820 align:middle line:90%
it's going to change over here.

00:06:17.820 --> 00:06:19.968 align:middle line:90%
So really, really cool.

00:06:19.968 --> 00:06:22.010 align:middle line:84%
At the bottom, you can
see-- you have the ability

00:06:22.010 --> 00:06:26.450 align:middle line:84%
to generate a reverse shell,
a bind shell, and MSFVenom

00:06:26.450 --> 00:06:27.180 align:middle line:90%
payloads.

00:06:27.180 --> 00:06:29.630 align:middle line:84%
So again, those are
also quite useful.

00:06:29.630 --> 00:06:32.210 align:middle line:90%
In terms of bind--

00:06:32.210 --> 00:06:34.310 align:middle line:84%
in terms of bind
code, you can see

00:06:34.310 --> 00:06:37.340 align:middle line:84%
that you're pretty much only
limited to Python 3 and PhP,

00:06:37.340 --> 00:06:41.000 align:middle line:84%
in the event that target does
not have a Netcat installed.

00:06:41.000 --> 00:06:43.700 align:middle line:84%
And in the context of
Windows, the only other option

00:06:43.700 --> 00:06:46.770 align:middle line:84%
is Python 3, which,
again, is very rare.

00:06:46.770 --> 00:06:48.420 align:middle line:84%
So again, if we
click on reverse,

00:06:48.420 --> 00:06:50.890 align:middle line:84%
you can sort through
by operating system.

00:06:50.890 --> 00:06:53.400 align:middle line:84%
So in this case, what
we'll be trying to do

00:06:53.400 --> 00:06:55.710 align:middle line:84%
is obtain a reverse
shell on a Windows system

00:06:55.710 --> 00:06:57.750 align:middle line:84%
that doesn't have
Netcat installed,

00:06:57.750 --> 00:07:01.020 align:middle line:84%
and we are only going to
utilize the PowerShell code.

00:07:01.020 --> 00:07:03.120 align:middle line:90%
So we'll use PowerShell.

00:07:03.120 --> 00:07:06.150 align:middle line:84%
This particular option here,
so that's PowerShell 2.

00:07:06.150 --> 00:07:08.850 align:middle line:84%
And you may have to test
around the different variants

00:07:08.850 --> 00:07:10.950 align:middle line:90%
of this PowerShell generator.

00:07:10.950 --> 00:07:14.220 align:middle line:84%
So again, all you need
to do is just copy it.

00:07:14.220 --> 00:07:18.270 align:middle line:84%
Once you specify the actual
Kali Linux or attacker's IP

00:07:18.270 --> 00:07:21.300 align:middle line:84%
and the port, this has
already been added for you

00:07:21.300 --> 00:07:22.200 align:middle line:90%
or substituted.

00:07:22.200 --> 00:07:25.140 align:middle line:84%
So all you need to do is just
copy this right over here.

00:07:25.140 --> 00:07:29.100 align:middle line:84%
And then, somehow, transfer
it over to the target system.

00:07:29.100 --> 00:07:32.910 align:middle line:84%
That can be-- as I said, this
can be part of a larger exploit

00:07:32.910 --> 00:07:36.150 align:middle line:84%
or you can essentially copy
it or paste all of this

00:07:36.150 --> 00:07:38.850 align:middle line:84%
into a PowerShell file
or a PowerShell script

00:07:38.850 --> 00:07:41.963 align:middle line:84%
for that matter, and get
it executed on the target.

00:07:41.963 --> 00:07:43.380 align:middle line:84%
In this case, what
I'm going to do

00:07:43.380 --> 00:07:46.350 align:middle line:84%
is I'm just going to copy this
here, as I've already done.

00:07:46.350 --> 00:07:48.000 align:middle line:84%
And I'll show you
that you can actually

00:07:48.000 --> 00:07:51.760 align:middle line:84%
obtain a reverse shell without
Netcat on the target site.

00:07:51.760 --> 00:07:53.400 align:middle line:84%
So for receiving
the reverse shell,

00:07:53.400 --> 00:07:55.590 align:middle line:84%
we're going to set up
the Netcat listener here.

00:07:55.590 --> 00:07:59.130 align:middle line:90%
So nc -nvlp 1234.

00:07:59.130 --> 00:08:00.815 align:middle line:90%
Hit Enter.

00:08:00.815 --> 00:08:02.190 align:middle line:84%
And I'm just going
to switch over

00:08:02.190 --> 00:08:05.730 align:middle line:84%
to my Windows 7 system,
just to demonstrate this.

00:08:05.730 --> 00:08:07.960 align:middle line:84%
All right, so I'm on
my Windows 7 system,

00:08:07.960 --> 00:08:10.410 align:middle line:84%
and I can just open up a
command prompt session.

00:08:10.410 --> 00:08:13.170 align:middle line:90%
So I'll just search for cmd.

00:08:13.170 --> 00:08:15.385 align:middle line:84%
And before we actually
executed, there

00:08:15.385 --> 00:08:17.010 align:middle line:84%
are a few changes
that need to be made.

00:08:17.010 --> 00:08:19.500 align:middle line:84%
Because if we
paste this in here,

00:08:19.500 --> 00:08:21.820 align:middle line:84%
it might actually work
during the first run.

00:08:21.820 --> 00:08:23.070 align:middle line:90%
So I'm just going to paste it.

00:08:23.070 --> 00:08:26.040 align:middle line:84%
And in some cases, you
may need to specify

00:08:26.040 --> 00:08:28.440 align:middle line:84%
that you want to
execute powershell.exe

00:08:28.440 --> 00:08:30.540 align:middle line:90%
on certain versions of Windows.

00:08:30.540 --> 00:08:34.690 align:middle line:84%
And let me just increase
the font size here.

00:08:34.690 --> 00:08:37.425 align:middle line:84%
And yeah, we can just
increase that there.

00:08:37.425 --> 00:08:40.510 align:middle line:84%
And we also-- you can see
that code is being executed.

00:08:40.510 --> 00:08:41.980 align:middle line:84%
As I said, in some
cases, you may

00:08:41.980 --> 00:08:45.610 align:middle line:84%
need to modify the PowerShell
code that has been generated

00:08:45.610 --> 00:08:47.470 align:middle line:90%
by the reversal generator.

00:08:47.470 --> 00:08:49.700 align:middle line:84%
But lets hit Enter, and
let's see what happens.

00:08:49.700 --> 00:08:51.460 align:middle line:90%
So we don't get some--

00:08:51.460 --> 00:08:54.850 align:middle line:84%
we don't get any feedback, which
means this is probably working.

00:08:54.850 --> 00:08:58.770 align:middle line:84%
So I'll just switch over
to my Kali Linux VM.

00:08:58.770 --> 00:09:00.510 align:middle line:90%
OK, so I'm back on my Kali VM.

00:09:00.510 --> 00:09:02.160 align:middle line:84%
And as you can see,
we get a connection

00:09:02.160 --> 00:09:05.200 align:middle line:84%
from the actual target,
the Windows 7 system.

00:09:05.200 --> 00:09:08.490 align:middle line:84%
And if we hit Enter, you can
see we get a partial session.

00:09:08.490 --> 00:09:10.890 align:middle line:84%
And we've successfully
been able to obtain

00:09:10.890 --> 00:09:13.590 align:middle line:84%
a reverse shell on
the target system

00:09:13.590 --> 00:09:15.490 align:middle line:90%
without Netcat being installed.

00:09:15.490 --> 00:09:17.340 align:middle line:84%
So this is really
where you can start

00:09:17.340 --> 00:09:20.310 align:middle line:84%
seeing the power of reverse
shells, as opposed to bind

00:09:20.310 --> 00:09:23.400 align:middle line:84%
shells, where you need to have
a Netcat listener on the target

00:09:23.400 --> 00:09:24.280 align:middle line:90%
system.

00:09:24.280 --> 00:09:27.150 align:middle line:84%
So you can see that
we can pretty much

00:09:27.150 --> 00:09:28.150 align:middle line:90%
do whatever we want.

00:09:28.150 --> 00:09:31.330 align:middle line:84%
I can say who am I, and I
get the information there.

00:09:31.330 --> 00:09:35.460 align:middle line:84%
And then, we can type in
systeminfo, for example,

00:09:35.460 --> 00:09:38.850 align:middle line:84%
get information regarding
the operating system itself.

00:09:38.850 --> 00:09:39.630 align:middle line:90%
There we go.

00:09:39.630 --> 00:09:40.470 align:middle line:90%
Fantastic.

00:09:40.470 --> 00:09:44.670 align:middle line:84%
We can see it's running
Windows 7 Ultimate, Build 7601,

00:09:44.670 --> 00:09:46.290 align:middle line:90%
so on, and so forth, right?

00:09:46.290 --> 00:09:49.200 align:middle line:84%
And as I said, you're not just
limited to just PowerShell.

00:09:49.200 --> 00:09:54.240 align:middle line:84%
You also have the ability
to actually compile

00:09:54.240 --> 00:09:57.910 align:middle line:84%
your own executable that
will connect to the listener.

00:09:57.910 --> 00:10:01.380 align:middle line:84%
So this is your Windows C code
that you can then compile.

00:10:01.380 --> 00:10:04.320 align:middle line:84%
And the compilation process
is essentially the same

00:10:04.320 --> 00:10:09.150 align:middle line:84%
as you would be if you are
trying to compile or cross

00:10:09.150 --> 00:10:11.250 align:middle line:90%
compile a Windows exploit.

00:10:11.250 --> 00:10:12.550 align:middle line:90%
We've already explored that.

00:10:12.550 --> 00:10:14.910 align:middle line:84%
So you can use the
various compilers that

00:10:14.910 --> 00:10:16.650 align:middle line:90%
are highlighted in that video.

00:10:16.650 --> 00:10:19.830 align:middle line:84%
And as I said, it really
is a fantastic resource.

00:10:19.830 --> 00:10:22.830 align:middle line:84%
Because, as I said, it's
not just limited to--

00:10:22.830 --> 00:10:24.870 align:middle line:84%
it's not just limited
to one operating system.

00:10:24.870 --> 00:10:28.840 align:middle line:84%
You also have your Mac
reverse shells here,

00:10:28.840 --> 00:10:29.830 align:middle line:90%
so on, and so forth.

00:10:29.830 --> 00:10:32.040 align:middle line:84%
So again, definitely
check this out.

00:10:32.040 --> 00:10:34.050 align:middle line:90%
This is revshells.com.

00:10:34.050 --> 00:10:38.190 align:middle line:84%
And the GitHub repository
here is just under Payload

00:10:38.190 --> 00:10:41.520 align:middle line:84%
All The Things, and it's called
the Reverse Shell Cheatsheet.

00:10:41.520 --> 00:10:45.000 align:middle line:84%
So both of them are good,
but I would personally

00:10:45.000 --> 00:10:48.180 align:middle line:84%
recommend utilizing the
reverse shell generator

00:10:48.180 --> 00:10:50.040 align:middle line:84%
if you're just
getting started out

00:10:50.040 --> 00:10:51.540 align:middle line:84%
or if you're just
getting started,

00:10:51.540 --> 00:10:55.020 align:middle line:84%
and you'd like to explore the
various types of reverse shell

00:10:55.020 --> 00:10:58.650 align:middle line:84%
code that you can generate,
essentially, for execution

00:10:58.650 --> 00:11:00.270 align:middle line:90%
on the target system.

00:11:00.270 --> 00:11:04.230 align:middle line:84%
OK, so this is going to conclude
the practical demonstration

00:11:04.230 --> 00:11:06.770 align:middle line:90%
side of this video.

00:11:06.770 --> 00:11:10.480 align:middle line:84%
All right, so that concludes
the bind and reverse shell

00:11:10.480 --> 00:11:12.160 align:middle line:90%
section of this course.

00:11:12.160 --> 00:11:14.470 align:middle line:84%
In the next section, we're
going to be taking a look

00:11:14.470 --> 00:11:17.080 align:middle line:84%
at various exploitation
frameworks that

00:11:17.080 --> 00:11:20.680 align:middle line:84%
can be used to streamline
and automate the exploitation

00:11:20.680 --> 00:11:21.380 align:middle line:90%
process.

00:11:21.380 --> 00:11:24.870 align:middle line:84%
So I'll see you in
the next section.

00:11:24.870 --> 00:11:26.000 align:middle line:90%