WEBVTT

00:00:00.000 --> 00:00:05.302 align:middle line:90%


00:00:05.302 --> 00:00:09.158 align:middle line:90%
[MUSIC PLAYING]

00:00:09.158 --> 00:00:10.140 align:middle line:90%


00:00:10.140 --> 00:00:12.520 align:middle line:84%
Introduction to
post-exploitation.

00:00:12.520 --> 00:00:15.120 align:middle line:84%
So welcome to the first
section and the first video

00:00:15.120 --> 00:00:16.360 align:middle line:90%
within this course.

00:00:16.360 --> 00:00:18.750 align:middle line:84%
In this video, I'm going
to be introducing you

00:00:18.750 --> 00:00:20.320 align:middle line:90%
to post-exploitation.

00:00:20.320 --> 00:00:22.830 align:middle line:84%
So we're going to take a look
at what post-exploitation is

00:00:22.830 --> 00:00:25.020 align:middle line:84%
and the various tasks
and techniques that

00:00:25.020 --> 00:00:27.870 align:middle line:90%
fall under post-exploitation.

00:00:27.870 --> 00:00:30.840 align:middle line:84%
We'll also be exploring
a few important things

00:00:30.840 --> 00:00:32.820 align:middle line:84%
that you need to
keep in mind when

00:00:32.820 --> 00:00:35.370 align:middle line:84%
performing post-exploitation,
so some very

00:00:35.370 --> 00:00:37.030 align:middle line:90%
important considerations.

00:00:37.030 --> 00:00:37.530 align:middle line:90%
All right.

00:00:37.530 --> 00:00:39.070 align:middle line:90%
So let's get started.

00:00:39.070 --> 00:00:42.660 align:middle line:84%
First and foremost, what is
post-exploitation, right?

00:00:42.660 --> 00:00:46.470 align:middle line:84%
Because if this is your first
foray into penetration testing,

00:00:46.470 --> 00:00:48.150 align:middle line:84%
you might be a
little bit confused

00:00:48.150 --> 00:00:51.160 align:middle line:84%
because you have exploitation
and then post-exploitation.

00:00:51.160 --> 00:00:55.020 align:middle line:84%
So post-exploitation is the
final phase of the penetration

00:00:55.020 --> 00:00:58.200 align:middle line:84%
testing process or
life cycle and consists

00:00:58.200 --> 00:01:00.690 align:middle line:84%
of the tactics,
techniques, and procedures

00:01:00.690 --> 00:01:03.540 align:middle line:84%
that attackers or
penetration testers undertake

00:01:03.540 --> 00:01:07.080 align:middle line:84%
after obtaining initial
access on a target system.

00:01:07.080 --> 00:01:09.630 align:middle line:84%
To put it simply,
post-exploitation

00:01:09.630 --> 00:01:13.950 align:middle line:84%
involves what you do or
have to do after or once

00:01:13.950 --> 00:01:18.420 align:middle line:84%
you gain access or an initial
foothold on the target system.

00:01:18.420 --> 00:01:21.840 align:middle line:84%
To make that even simpler, once
you gain access to a target

00:01:21.840 --> 00:01:23.730 align:middle line:84%
system or once you have
exploited the target

00:01:23.730 --> 00:01:26.760 align:middle line:84%
system, what do you do,
that's where post exploitation

00:01:26.760 --> 00:01:27.760 align:middle line:90%
comes into play.

00:01:27.760 --> 00:01:30.450 align:middle line:84%
And this ties into
the first question

00:01:30.450 --> 00:01:33.660 align:middle line:84%
that I essentially posed
to you is if you're just

00:01:33.660 --> 00:01:35.620 align:middle line:84%
getting into
penetration testing,

00:01:35.620 --> 00:01:38.370 align:middle line:84%
once you exploit the
system, what do you do?

00:01:38.370 --> 00:01:40.680 align:middle line:84%
Does the penetration
test end there?

00:01:40.680 --> 00:01:41.760 align:middle line:90%
Well, it doesn't.

00:01:41.760 --> 00:01:44.640 align:middle line:84%
We have a final stage,
which is post-exploitation

00:01:44.640 --> 00:01:45.990 align:middle line:90%
and then of course, reporting.

00:01:45.990 --> 00:01:49.920 align:middle line:84%
But post-exploitation
is the final phase

00:01:49.920 --> 00:01:52.290 align:middle line:84%
that essentially involves
interacting with the target

00:01:52.290 --> 00:01:54.610 align:middle line:90%
system or the target network.

00:01:54.610 --> 00:01:58.590 align:middle line:84%
So again, this phase
of the penetration test

00:01:58.590 --> 00:02:00.450 align:middle line:84%
essentially deals
with what you should

00:02:00.450 --> 00:02:03.480 align:middle line:84%
do after you've gained
access to a target system.

00:02:03.480 --> 00:02:05.730 align:middle line:84%
And the various
tasks or phases that

00:02:05.730 --> 00:02:08.039 align:middle line:84%
fall under post-exploitation
will essentially

00:02:08.039 --> 00:02:10.710 align:middle line:84%
involve gathering information
about the target system

00:02:10.710 --> 00:02:14.550 align:middle line:84%
that you've just exploited,
elevating your privileges,

00:02:14.550 --> 00:02:17.340 align:middle line:84%
dumping hashes for the
purpose of password cracking

00:02:17.340 --> 00:02:20.850 align:middle line:84%
or authentication,
identifying other target

00:02:20.850 --> 00:02:23.280 align:middle line:84%
systems on the company's
internal network

00:02:23.280 --> 00:02:24.690 align:middle line:90%
that you can pivot to.

00:02:24.690 --> 00:02:29.010 align:middle line:84%
So really, from a very
high or advanced level,

00:02:29.010 --> 00:02:32.430 align:middle line:84%
after you've gained access to
one target system on a target

00:02:32.430 --> 00:02:36.030 align:middle line:84%
network, that really is the
beginning of a penetration test

00:02:36.030 --> 00:02:37.980 align:middle line:84%
because, remember,
once you've gained

00:02:37.980 --> 00:02:40.920 align:middle line:84%
an initial foothold
on a target's network,

00:02:40.920 --> 00:02:43.620 align:middle line:84%
you then need to find other
systems that you can exploit

00:02:43.620 --> 00:02:46.110 align:middle line:84%
on that network because,
remember, as a penetration

00:02:46.110 --> 00:02:50.070 align:middle line:84%
tester, you have been hired
to target the entire network.

00:02:50.070 --> 00:02:54.030 align:middle line:84%
And in some cases, you may be
limited to specific systems,

00:02:54.030 --> 00:02:58.080 align:middle line:84%
but you need to proceed on in
terms of your penetration test

00:02:58.080 --> 00:03:01.470 align:middle line:84%
with gathering information about
these other target systems,

00:03:01.470 --> 00:03:04.680 align:middle line:84%
exploiting them, et cetera,
and the cycle essentially

00:03:04.680 --> 00:03:06.460 align:middle line:90%
repeats itself.

00:03:06.460 --> 00:03:10.050 align:middle line:84%
Now one important thing that you
need to take into consideration

00:03:10.050 --> 00:03:12.270 align:middle line:84%
is that post-exploitation
will differ

00:03:12.270 --> 00:03:15.420 align:middle line:84%
based on the target operating
system as well as the target

00:03:15.420 --> 00:03:16.350 align:middle line:90%
infrastructure.

00:03:16.350 --> 00:03:17.860 align:middle line:90%
What do I mean by this?

00:03:17.860 --> 00:03:22.260 align:middle line:84%
Well, we can sort of
solidify or have a basic idea

00:03:22.260 --> 00:03:24.300 align:middle line:84%
of what we're going to
do after we gain access

00:03:24.300 --> 00:03:25.630 align:middle line:90%
to a target system.

00:03:25.630 --> 00:03:28.530 align:middle line:84%
However, what we can do and
the techniques and tools

00:03:28.530 --> 00:03:32.560 align:middle line:84%
that we can utilize will depend
on the target operating system.

00:03:32.560 --> 00:03:35.070 align:middle line:84%
So if we're performing
post-exploitation on Windows,

00:03:35.070 --> 00:03:37.170 align:middle line:84%
the process is going to
be a little bit different.

00:03:37.170 --> 00:03:39.870 align:middle line:84%
If we're performing it on
Linux, the same thing, right?

00:03:39.870 --> 00:03:43.050 align:middle line:84%
So we need to take the
differences between these two

00:03:43.050 --> 00:03:44.880 align:middle line:90%
operating systems in--

00:03:44.880 --> 00:03:47.400 align:middle line:84%
we need to actually
keep that, and we need

00:03:47.400 --> 00:03:50.145 align:middle line:90%
to take it into consideration.

00:03:50.145 --> 00:03:51.630 align:middle line:84%
Another thing that
I mentioned here

00:03:51.630 --> 00:03:53.040 align:middle line:90%
is the target infrastructure.

00:03:53.040 --> 00:03:59.070 align:middle line:84%
So, as I said, post-exploitation
is a really extensive section

00:03:59.070 --> 00:04:01.050 align:middle line:84%
or phase of the
penetration test primarily

00:04:01.050 --> 00:04:04.350 align:middle line:84%
because it is also the
phase or section that

00:04:04.350 --> 00:04:08.910 align:middle line:84%
involves targeting or exploiting
other systems on the target

00:04:08.910 --> 00:04:09.430 align:middle line:90%
network.

00:04:09.430 --> 00:04:12.540 align:middle line:84%
So you also need to be
aware of the target network

00:04:12.540 --> 00:04:15.790 align:middle line:84%
infrastructure and what other
systems are on that network.

00:04:15.790 --> 00:04:20.010 align:middle line:84%
So, again, you really need to
take that into consideration.

00:04:20.010 --> 00:04:22.810 align:middle line:84%
A few other considerations
are the following.

00:04:22.810 --> 00:04:25.980 align:middle line:84%
So the post-exploitation
techniques and tools

00:04:25.980 --> 00:04:29.490 align:middle line:84%
that you can use will depend
on what kind of access

00:04:29.490 --> 00:04:32.280 align:middle line:84%
you have on the system that
you've just compromised,

00:04:32.280 --> 00:04:34.890 align:middle line:84%
as well as how stealthy
you have to be in order

00:04:34.890 --> 00:04:36.130 align:middle line:90%
to avoid detection.

00:04:36.130 --> 00:04:37.330 align:middle line:90%
So what does this mean?

00:04:37.330 --> 00:04:38.790 align:middle line:90%
Let me break it down.

00:04:38.790 --> 00:04:41.700 align:middle line:84%
The techniques and
tools that you can use

00:04:41.700 --> 00:04:44.280 align:middle line:84%
or that you will
eventually end up using

00:04:44.280 --> 00:04:46.770 align:middle line:84%
will depend on, number
one, what kind of access

00:04:46.770 --> 00:04:47.980 align:middle line:90%
you have on the system.

00:04:47.980 --> 00:04:50.700 align:middle line:90%
So what does this mean?

00:04:50.700 --> 00:04:52.570 align:middle line:90%
Let's use a simple example.

00:04:52.570 --> 00:04:54.850 align:middle line:84%
Let's say you're a junior
penetration tester,

00:04:54.850 --> 00:04:57.990 align:middle line:84%
and you've just exploited
a Windows system.

00:04:57.990 --> 00:05:00.120 align:middle line:84%
And the default
privileges that you've

00:05:00.120 --> 00:05:02.250 align:middle line:84%
obtained through
this exploitation

00:05:02.250 --> 00:05:04.920 align:middle line:84%
are not privileged, or
you've obtained access

00:05:04.920 --> 00:05:08.500 align:middle line:84%
to the target system via
an unprivileged user.

00:05:08.500 --> 00:05:11.550 align:middle line:84%
So from that starting
point, the phases

00:05:11.550 --> 00:05:14.280 align:middle line:84%
or the techniques and
tools that you can use

00:05:14.280 --> 00:05:17.580 align:middle line:84%
or that you will follow will
be different than if you would

00:05:17.580 --> 00:05:19.320 align:middle line:84%
have gained access
to the target system

00:05:19.320 --> 00:05:23.370 align:middle line:90%
and obtained an elevated access.

00:05:23.370 --> 00:05:26.970 align:middle line:84%
So for example, if you
exploit a Windows system,

00:05:26.970 --> 00:05:28.680 align:middle line:84%
and you gain access
to the target

00:05:28.680 --> 00:05:31.410 align:middle line:84%
system via an
unprivileged user account,

00:05:31.410 --> 00:05:34.650 align:middle line:84%
that means that
before you can start

00:05:34.650 --> 00:05:37.530 align:middle line:84%
dumping hashes and
credentials, you actually

00:05:37.530 --> 00:05:39.210 align:middle line:90%
need to elevate your privileges.

00:05:39.210 --> 00:05:42.240 align:middle line:84%
So you can see how the
different phases that

00:05:42.240 --> 00:05:44.850 align:middle line:84%
fall under post exploitation
will actually shift.

00:05:44.850 --> 00:05:48.000 align:middle line:84%
And in some cases, they might
be eliminated altogether.

00:05:48.000 --> 00:05:49.300 align:middle line:90%
What do I mean by that?

00:05:49.300 --> 00:05:51.310 align:middle line:84%
Well, again, let's
go to the example.

00:05:51.310 --> 00:05:54.150 align:middle line:84%
If I exploit a Windows system
through the EternalBlue

00:05:54.150 --> 00:05:56.820 align:middle line:84%
exploit, for example,
that will provide me

00:05:56.820 --> 00:05:59.550 align:middle line:84%
with an elevated session
on the target, which

00:05:59.550 --> 00:06:02.880 align:middle line:84%
means I don't need to elevate
my privileges as the EternalBlue

00:06:02.880 --> 00:06:05.100 align:middle line:84%
exploit will provide me
with the highest privileges

00:06:05.100 --> 00:06:07.450 align:middle line:84%
available on that
Windows system.

00:06:07.450 --> 00:06:10.170 align:middle line:84%
So that means that I don't have
to go through the privilege

00:06:10.170 --> 00:06:13.860 align:middle line:84%
escalation phase because I've
already elevated my privileges.

00:06:13.860 --> 00:06:17.340 align:middle line:84%
So you can see how these
phases will essentially shift,

00:06:17.340 --> 00:06:19.800 align:middle line:84%
or in certain
cases, will not need

00:06:19.800 --> 00:06:22.650 align:middle line:84%
to be performed given
the type of access

00:06:22.650 --> 00:06:24.820 align:middle line:90%
you have on the system.

00:06:24.820 --> 00:06:27.810 align:middle line:84%
Another consideration is
how stealthy you have to be.

00:06:27.810 --> 00:06:34.890 align:middle line:84%
And this will really tie down or
fall under the various security

00:06:34.890 --> 00:06:37.800 align:middle line:84%
protocols and mechanisms
that the company has in place

00:06:37.800 --> 00:06:40.570 align:middle line:84%
to detect an intrusion
by an attacker.

00:06:40.570 --> 00:06:43.540 align:middle line:84%
So we're talking about
EDRs, antivirus solutions.

00:06:43.540 --> 00:06:45.420 align:middle line:84%
So again, the tools
and techniques

00:06:45.420 --> 00:06:48.000 align:middle line:84%
that you can use,
again, will depend

00:06:48.000 --> 00:06:52.110 align:middle line:84%
on how stealthy you want to be
in order to avoid detection.

00:06:52.110 --> 00:06:54.300 align:middle line:84%
And this ultimately
means that you

00:06:54.300 --> 00:06:56.820 align:middle line:84%
will need to utilize different
techniques and tools based

00:06:56.820 --> 00:06:59.970 align:middle line:84%
on the target operating
system and its configuration,

00:06:59.970 --> 00:07:02.340 align:middle line:84%
as well as the other
considerations that I just

00:07:02.340 --> 00:07:03.420 align:middle line:90%
mentioned.

00:07:03.420 --> 00:07:05.580 align:middle line:84%
What type of access
you have on the system

00:07:05.580 --> 00:07:07.860 align:middle line:90%
and how stealthy you have to be.

00:07:07.860 --> 00:07:10.110 align:middle line:84%
The post-exploitation
techniques that you

00:07:10.110 --> 00:07:12.300 align:middle line:84%
can run against the
target will also

00:07:12.300 --> 00:07:14.670 align:middle line:84%
need to abide by the
rules of engagement that

00:07:14.670 --> 00:07:17.520 align:middle line:84%
were agreed upon with the
client that you are performing

00:07:17.520 --> 00:07:19.020 align:middle line:90%
the penetration test for.

00:07:19.020 --> 00:07:22.110 align:middle line:84%
So before you actually
begin a penetration test,

00:07:22.110 --> 00:07:27.270 align:middle line:84%
one of the most important steps
again, that really comes down

00:07:27.270 --> 00:07:31.380 align:middle line:84%
into the first phase before you
actually begin the penetration

00:07:31.380 --> 00:07:35.790 align:middle line:84%
test involves setting up rules
of engagement with the client.

00:07:35.790 --> 00:07:37.950 align:middle line:84%
So what you're trying to
do here with the client

00:07:37.950 --> 00:07:43.770 align:middle line:84%
is you're trying to
set up rules that

00:07:43.770 --> 00:07:47.010 align:middle line:84%
can be agreed upon by both
parties that essentially lay

00:07:47.010 --> 00:07:49.710 align:middle line:84%
out what systems
can be exploited,

00:07:49.710 --> 00:07:51.840 align:middle line:90%
what techniques can be run.

00:07:51.840 --> 00:07:55.260 align:middle line:84%
And another additional clause
that can be added in there

00:07:55.260 --> 00:07:57.720 align:middle line:84%
is what I can do once
I've gained access

00:07:57.720 --> 00:07:58.560 align:middle line:90%
to a target system.

00:07:58.560 --> 00:08:01.170 align:middle line:90%
Can I delete Windows event logs?

00:08:01.170 --> 00:08:03.780 align:middle line:84%
Can I interact
with customer data?

00:08:03.780 --> 00:08:05.490 align:middle line:84%
All of these things
need to be laid out

00:08:05.490 --> 00:08:07.140 align:middle line:90%
before the penetration test.

00:08:07.140 --> 00:08:09.060 align:middle line:84%
Now, as a junior
penetration tester,

00:08:09.060 --> 00:08:11.980 align:middle line:84%
you will be made aware of
the rules of engagement.

00:08:11.980 --> 00:08:15.540 align:middle line:84%
And again, post-exploitation
is a very important phase

00:08:15.540 --> 00:08:18.420 align:middle line:84%
of the penetration testing
lifecycle because as I said,

00:08:18.420 --> 00:08:21.540 align:middle line:84%
you actually have access
to the target system.

00:08:21.540 --> 00:08:24.090 align:middle line:84%
And some of the techniques
that you will be running

00:08:24.090 --> 00:08:27.840 align:middle line:84%
could negatively impact the
company's infrastructure

00:08:27.840 --> 00:08:29.760 align:middle line:84%
or that system that
you've just exploited.

00:08:29.760 --> 00:08:34.980 align:middle line:84%
So you need to take the rules of
engagement into consideration.

00:08:34.980 --> 00:08:39.539 align:middle line:84%
So for example, if the rules of
engagement that you've agreed

00:08:39.539 --> 00:08:42.990 align:middle line:84%
on with the client state that
you cannot touch any customer

00:08:42.990 --> 00:08:46.260 align:middle line:84%
data, then you need to take
that into consideration as you

00:08:46.260 --> 00:08:47.910 align:middle line:90%
perform post exploitation.

00:08:47.910 --> 00:08:50.550 align:middle line:84%
If they say that you cannot
elevate your privileges,

00:08:50.550 --> 00:08:53.550 align:middle line:84%
then again, that's something
that you should also eliminate.

00:08:53.550 --> 00:08:57.320 align:middle line:84%
So again, just
keep that in mind.

00:08:57.320 --> 00:09:00.220 align:middle line:84%
One final consideration
that I want

00:09:00.220 --> 00:09:02.650 align:middle line:84%
you to take into
stride or I want

00:09:02.650 --> 00:09:05.470 align:middle line:84%
you to run along with and
keep at the back of your mind

00:09:05.470 --> 00:09:09.550 align:middle line:84%
as you progress with your career
as a penetration tester is

00:09:09.550 --> 00:09:11.830 align:middle line:84%
that when you're running
post-exploitation techniques

00:09:11.830 --> 00:09:13.930 align:middle line:84%
and tools, you need to
be sure that you have

00:09:13.930 --> 00:09:17.590 align:middle line:84%
the necessary rights,
permissions, whatever you want

00:09:17.590 --> 00:09:20.890 align:middle line:84%
to call it, to modify services,
system configurations,

00:09:20.890 --> 00:09:23.590 align:middle line:84%
perform privilege escalation,
delete logs, et cetera.

00:09:23.590 --> 00:09:26.240 align:middle line:84%
And this ties into the
rules of engagement.

00:09:26.240 --> 00:09:28.480 align:middle line:84%
So again, I want to
just reiterate it

00:09:28.480 --> 00:09:29.840 align:middle line:90%
because it's very important.

00:09:29.840 --> 00:09:31.990 align:middle line:84%
The last thing you
want is to delete

00:09:31.990 --> 00:09:34.390 align:middle line:84%
Windows event logs
on a Windows system

00:09:34.390 --> 00:09:35.770 align:middle line:90%
that you've just exploited.

00:09:35.770 --> 00:09:39.160 align:middle line:84%
And that will essentially
breach the rules of engagement

00:09:39.160 --> 00:09:41.500 align:middle line:84%
that you agreed upon
with the client system.

00:09:41.500 --> 00:09:43.870 align:middle line:84%
Because all of
that data that you

00:09:43.870 --> 00:09:46.420 align:middle line:84%
may be interacting
with or deleting

00:09:46.420 --> 00:09:48.470 align:middle line:84%
could be vital to
the company itself.

00:09:48.470 --> 00:09:51.790 align:middle line:84%
So again, just take
that into consideration

00:09:51.790 --> 00:09:53.530 align:middle line:90%
as you move along.

00:09:53.530 --> 00:09:57.760 align:middle line:84%
With that being said, let's
just end this video by getting

00:09:57.760 --> 00:10:01.150 align:middle line:84%
or by taking a look at the
post-exploitation or rather

00:10:01.150 --> 00:10:03.610 align:middle line:84%
the privilege
escalation lifecycle

00:10:03.610 --> 00:10:07.954 align:middle line:84%
and where post-exploitation
fits into all of this.

00:10:07.954 --> 00:10:11.650 align:middle line:84%
As we've started off with
the information gathering

00:10:11.650 --> 00:10:16.060 align:middle line:84%
enumeration section of the
open testing lifecycle,

00:10:16.060 --> 00:10:19.300 align:middle line:84%
we were able to learn how to
perform information gathering,

00:10:19.300 --> 00:10:21.100 align:middle line:90%
both active and passive.

00:10:21.100 --> 00:10:22.990 align:middle line:84%
We learned how to
perform enumeration.

00:10:22.990 --> 00:10:25.660 align:middle line:84%
And of course, we
explored exploitation.

00:10:25.660 --> 00:10:27.620 align:middle line:84%
And now, we are at
post-exploitation.

00:10:27.620 --> 00:10:30.340 align:middle line:84%
So this gives you an idea
of the steps or phases that

00:10:30.340 --> 00:10:32.420 align:middle line:90%
fall under post-exploitation.

00:10:32.420 --> 00:10:34.990 align:middle line:84%
So you'll typically start off
with privilege escalation.

00:10:34.990 --> 00:10:37.090 align:middle line:84%
You'll then maintain
persistent access.

00:10:37.090 --> 00:10:38.740 align:middle line:84%
And finally, you'll
clear your tracks.

00:10:38.740 --> 00:10:42.520 align:middle line:84%
Now this is by no means an
extensive or comprehensive view

00:10:42.520 --> 00:10:44.830 align:middle line:84%
of the post-exploitation
methodology.

00:10:44.830 --> 00:10:47.630 align:middle line:84%
That is what we're going to be
exploring in the next video.

00:10:47.630 --> 00:10:50.740 align:middle line:84%
So again, I just wanted
to go back to this diagram

00:10:50.740 --> 00:10:52.250 align:middle line:90%
to show you where we are.

00:10:52.250 --> 00:10:56.200 align:middle line:84%
And indeed, this is the final
stage of a penetration test

00:10:56.200 --> 00:10:59.248 align:middle line:84%
before you actually
move on to reporting.

00:10:59.248 --> 00:11:00.790 align:middle line:84%
With that being
said, we can actually

00:11:00.790 --> 00:11:02.710 align:middle line:84%
move on to the next
video, where we'll

00:11:02.710 --> 00:11:05.680 align:middle line:84%
be exploring the
post-exploitation methodology

00:11:05.680 --> 00:11:09.220 align:middle line:84%
and taking a look at where
everything fits in terms

00:11:09.220 --> 00:11:10.820 align:middle line:90%
of techniques and tools.

00:11:10.820 --> 00:11:14.520 align:middle line:84%
So I'll be seeing you
in the next video.

00:11:14.520 --> 00:11:15.306 align:middle line:90%