WEBVTT

0:00:05.220000 --> 0:00:08.640000
 All right, so now I need to apply some
 networks, some IP addresses on

0:00:08.640000 --> 0:00:16.780000
 here. So I'm going to use green and
 one network is going to span from

0:00:16.780000 --> 0:00:30.560000
 here to here. So everything inside this
 green shape will be one network.

0:00:30.560000 --> 0:00:38.600000
 And then I'll use brown
 here, I suppose.

0:00:38.600000 --> 0:00:50.780000
 And these serial interfaces
 here will be in a network.

0:00:50.780000 --> 0:00:54.020000
 And then we'll have
 a third network.

0:00:54.020000 --> 0:00:58.800000
 I'll do green over here.

0:00:58.800000 --> 0:01:05.940000
 In this particular case, I'm using
 my switches as just pure layer two

0:01:05.940000 --> 0:01:11.940000
 switches. So they are just extending
 my broadcast domain.

0:01:11.940000 --> 0:01:15.340000
 And if you're not familiar with that
 term broadcast domain, I talk about

0:01:15.340000 --> 0:01:24.480000
 that in my CCV videos as well.

0:01:24.480000 --> 0:01:27.140000
 OK, so those are, I
 need three networks.

0:01:27.140000 --> 0:01:31.120000
 So I have to ask myself, OK, so what
 network addresses do I want?

0:01:31.120000 --> 0:01:33.860000
 Remember, in my IP address, the first
 portion of the address is going

0:01:33.860000 --> 0:01:38.160000
 to be common among all the people
 in that network, all the devices.

0:01:38.160000 --> 0:01:41.160000
 And the second portion of the IP address
 is going to be unique for each

0:01:41.160000 --> 0:01:45.940000
 host or device or each net card
 connected to that network.

0:01:45.940000 --> 0:01:48.760000
 It says, does the WAN provider
 determine the clock rate?

0:01:48.760000 --> 0:01:52.580000
 Typically, yes. Typically, the actual
 WAN provider you're connected to,

0:01:52.580000 --> 0:01:56.640000
 they would provide clocking to you,
 the customer at the other end.

0:01:56.640000 --> 0:01:57.740000
 So let's just do it easy here.

0:01:57.740000 --> 0:02:02.220000
 Let's just say that this is going to
 be the one network, let's say 111

0:02:02.220000 --> 0:02:13.120000
 network. And let's say that this over here
 in brown will be the 222x network.

0:02:13.120000 --> 0:02:19.580000
 And over here in green will
 have the 333x network.

0:02:19.580000 --> 0:02:26.480000
 OK, so the laptop is going to be generating
 packets and expecting to receive

0:02:26.480000 --> 0:02:31.380000
 packets. So because he's creating packets
 from scratch and because packets

0:02:31.380000 --> 0:02:38.420000
 will be coming back to him, which he needs
 to read, he needs an IP address.

0:02:38.420000 --> 0:02:45.020000
 Now, his IP address, I will
 give it to him via DHCP.

0:02:45.020000 --> 0:02:52.260000
 Because in normal networks, you know,
 when you turn on your laptop, you

0:02:52.260000 --> 0:02:56.100000
 don't configure an IP address on your
 laptop, it just magically gets one.

0:02:56.100000 --> 0:03:03.660000
 And it gets one via the dynamic
 host configuration protocol.

0:03:03.660000 --> 0:03:09.080000
 Well, if he's the host, there has to
 be a DHCP server that can give him

0:03:09.080000 --> 0:03:14.440000
 his IP address. And so I'll
 make that as router one.

0:03:14.440000 --> 0:03:23.040000
 DHCP server. All right, we'll
 do that in a second.

0:03:23.040000 --> 0:03:26.400000
 Now, the switches, they don't
 need any IP addresses.

0:03:26.400000 --> 0:03:29.900000
 Now, if I want to tell that to
 them or ping them, they should.

0:03:29.900000 --> 0:03:32.420000
 But for the purposes of this lab to
 make it simple, I'm not going to do

0:03:32.420000 --> 0:03:35.240000
 that. They're just forwarding
 Ethernet frames.

0:03:35.240000 --> 0:03:38.080000
 They're not doing any
 network layer stuff.

0:03:38.080000 --> 0:03:43.040000
 So the only static IP address I'm going
 to put in network one is going

0:03:43.040000 --> 0:03:44.260000
 to be on my router.

0:03:44.260000 --> 0:03:47.980000
 So I'll give this interface
 right here.

0:03:47.980000 --> 0:03:56.960000
 Why don't we give him the last
 IP address in this network?

0:03:56.960000 --> 0:04:03.320000
 111254. And here, in my WAN cloud, I've
 only got two devices connected.

0:04:03.320000 --> 0:04:09.320000
 So we'll say this guy
 can be 2221 slash 30.

0:04:09.320000 --> 0:04:13.740000
 And this guy can be 2222 slash 30.


0:04:13.740000 --> 0:04:16.400000
 Now, if you're looking at this and you're
 starting to get confused over

0:04:16.400000 --> 0:04:18.580000
 the IP addresses once again.

0:04:18.580000 --> 0:04:24.340000
 For the purposes of this class, just
 know that the Internet protocol,

0:04:24.340000 --> 0:04:27.800000
 which is the protocol used to transmit
 data from your computer to another

0:04:27.800000 --> 0:04:32.680000
 computer requires that both sides of
 the connection have a unique address

0:04:32.680000 --> 0:04:34.780000
 called an IP address.

0:04:34.780000 --> 0:04:40.260000
 The actual format of that address, I
 get into detail in my CCNA videos.

0:04:40.260000 --> 0:04:44.420000
 And we just don't have time to
 go into that in this class.

0:04:44.420000 --> 0:04:52.060000
 And then here, I need two addresses
 in the 333 network.

0:04:52.060000 --> 0:04:56.820000
 So why don't we have
 this be 333.1.

0:04:56.820000 --> 0:04:59.860000
 Actually, let's just
 keep it consistent.

0:04:59.860000 --> 0:05:04.440000
 .2 because that is router
 two after all.

0:05:04.440000 --> 0:05:12.020000
 And this right here
 is router three.

0:05:12.020000 --> 0:05:14.700000
 So let's make him 333.

0:05:14.700000 --> 0:05:24.900000
 And once again, I'm going to configure
 those IP addresses on these interfaces.

0:05:24.900000 --> 0:05:26.980000
 The router itself does
 not get an IP address.

0:05:26.980000 --> 0:05:30.840000
 His interface gets an IP address.

0:05:30.840000 --> 0:05:33.680000
 All right, so I've got my
 IP addressing scheme done.

0:05:33.680000 --> 0:05:35.640000
 So let's go ahead and
 configure that.

0:05:35.640000 --> 0:05:38.860000
 I'm going to move this whiteboard over
 here to a different screen so I

0:05:38.860000 --> 0:05:40.560000
 can reference it.

0:05:40.560000 --> 0:05:46.660000
 OK, so switch number one,
 switch number two.

0:05:46.660000 --> 0:05:47.600000
 They don't need IP addresses.

0:05:47.600000 --> 0:05:51.280000
 So I just need to start configuring
 stuff on router number one.

0:05:51.280000 --> 0:05:55.080000
 So that is session three.

0:05:55.080000 --> 0:05:58.320000
 All right, so first of all,
 let's give him a host name.

0:05:58.320000 --> 0:06:00.260000
 So I recognize that
 he's router one.

0:06:00.260000 --> 0:06:02.380000
 I don't get him confused
 with anybody else.

0:06:02.380000 --> 0:06:05.860000
 Let's go into my fast
 ethernet interface.

0:06:05.860000 --> 0:06:11.080000
 IP address 111254.

0:06:11.080000 --> 0:06:20.740000
 Let's make sure that interface
 is up and enabled.

0:06:20.740000 --> 0:06:26.380000
 All right, and now let's go into
 my interface serial 010.

0:06:26.380000 --> 0:06:34.400000
 Give him the IP address I assigned of
 2221 with a different subnet mask.

0:06:34.400000 --> 0:06:44.740000
 OK, and before I leave router one, I need
 to configure him as a DHCP server.

0:06:44.740000 --> 0:06:47.640000
 So my laptop can actually
 get an IP address.

0:06:47.640000 --> 0:06:50.680000
 So IP DHCP pool.

0:06:50.680000 --> 0:06:54.720000
 Let's just give it the
 name of I and E.

0:06:54.720000 --> 0:07:00.100000
 And as a DHCP server, he's going to
 need to be handing out IP addresses

0:07:00.100000 --> 0:07:02.960000
 in the 111 network.

0:07:02.960000 --> 0:07:12.380000
 So I'll say network 11110.

0:07:12.380000 --> 0:07:16.980000
 And he will be the router that everybody
 in that network uses to get to

0:07:16.980000 --> 0:07:23.000000
 other networks. When they need to do
 web page lookups, they'll need a

0:07:23.000000 --> 0:07:27.580000
 DNS server. We'll just
 make that him as well.

0:07:27.580000 --> 0:07:32.100000
 And any DHCP addresses that he allocates,
 let's have them be good for

0:07:32.100000 --> 0:07:38.060000
 12 days and six hours.

0:07:38.060000 --> 0:07:45.140000
 All right, so with that all by itself,
 that should be enough for my laptop

0:07:45.140000 --> 0:07:48.500000
 to now obtain an IP
 address via DHCP.

0:07:48.500000 --> 0:07:52.400000
 Let's see if it has.

0:07:52.400000 --> 0:08:06.820000
 Bring up my DOS prompt.

0:08:06.820000 --> 0:08:12.160000
 OK, with my DOS prompt
 up, I'll say IP config.

0:08:12.160000 --> 0:08:24.900000
 OK, so my ethernet adapter, as we can see
 here, has not gotten an IP address.

0:08:24.900000 --> 0:08:29.260000
 It defaulted to the automatically provisioned
 IP address of 169, but it

0:08:29.260000 --> 0:08:30.960000
 should have gotten an
 IP address of 111.

0:08:30.960000 --> 0:08:40.100000
 So let me go ahead and
 sort of kickstart DHCP.

0:08:40.100000 --> 0:08:56.420000
 All right. That looks better.

0:08:56.420000 --> 0:08:57.920000
 Here we go, ethernet address.

0:08:57.920000 --> 0:09:02.380000
 It was given the first address
 in that range, 1111.

0:09:02.380000 --> 0:09:07.600000
 And so now to prove that he has network
 connectivity, I'm just going to

0:09:07.600000 --> 0:09:10.680000
 issue a ping to 111254.

0:09:10.680000 --> 0:09:13.700000
 See if I can ping my default gateway,
 which I definitely should be able

0:09:13.700000 --> 0:09:21.920000
 to. And I can. I can ping
 my default gateway.

0:09:21.920000 --> 0:09:27.420000
 OK, so my IP addressing
 is done on router one.

0:09:27.420000 --> 0:09:31.100000
 Let's go over now to router two, and
 let's just finish off my diagram

0:09:31.100000 --> 0:09:43.840000
 here. Give him a unique host name,
 and we'll go into interface serial

0:09:43.840000 --> 0:09:54.460000
 010, IP address 2222.

0:09:54.460000 --> 0:10:00.260000
 OK. I think this is a little bit larger
 here so you guys can see it better.

0:10:00.260000 --> 0:10:08.000000
 OK, and then actually now I can't see
 my whiteboard, so that's not going

0:10:08.000000 --> 0:10:13.140000
 to work. And then let's leave that
 interface and go into his interface

0:10:13.140000 --> 0:10:14.880000
 fast ethernet zero slash one.

0:10:14.880000 --> 0:10:17.280000
 Maybe I can just do this.

0:10:17.280000 --> 0:10:22.980000
 Let's make the font
 a little larger.

0:10:22.980000 --> 0:10:31.460000
 There we go. IP address 3332.

0:10:31.460000 --> 0:10:38.280000
 Oops. No shutdown.

0:10:38.280000 --> 0:10:41.540000
 OK, I don't need to put an
 IP address on switch three.

0:10:41.540000 --> 0:10:47.300000
 So now let me go to my web server,
 which in reality is router three.

0:10:47.300000 --> 0:10:54.340000
 OK, so show run.

0:10:54.340000 --> 0:10:58.780000
 Do I have something
 for router three?

0:10:58.780000 --> 0:11:04.220000
 I do not. Ah, but I
 have it as server.

0:11:04.220000 --> 0:11:08.040000
 That's why. OK, so server.

0:11:08.040000 --> 0:11:13.620000
 Remember router three was connected to
 octal cable connection number six.

0:11:13.620000 --> 0:11:27.800000
 In just a moment here, I should be
 given access to his command line.

0:11:27.800000 --> 0:11:39.260000
 There we go. Just need to stick
 an IP address on him.

0:11:39.260000 --> 0:11:44.800000
 Your face fast ethernet zero
 slash one IP address 333.

0:11:44.800000 --> 0:11:55.200000
 OK, so if I've done everything correctly
 here, if there's nothing that

0:11:55.200000 --> 0:12:00.000000
 needs to be doing any troubleshooting,
 from my web server of 3333, I should

0:12:00.000000 --> 0:12:02.860000
 be able to ping 3332.

0:12:02.860000 --> 0:12:09.400000
 Let's confirm that I can.

0:12:09.400000 --> 0:12:12.420000
 There we go. Ping was successful.

0:12:12.420000 --> 0:12:15.600000
 And if I go over here to router two,
 he should be able to ping the other

0:12:15.600000 --> 0:12:18.340000
 side of the serial connection,
 which is 2221.

0:12:18.340000 --> 0:12:29.720000
 And he can. Now, I'm
 not done yet though.

0:12:29.720000 --> 0:12:32.280000
 Here's the problem.

0:12:32.280000 --> 0:12:36.440000
 Right now, the laptop
 has learned VADHCP.

0:12:36.440000 --> 0:12:38.120000
 Let's go ahead and put
 his IP address up here.

0:12:38.120000 --> 0:12:39.760000
 Now, these got one.

0:12:39.760000 --> 0:12:48.180000
 He is 1111. And his default
 gateway is 111254.

0:12:48.180000 --> 0:12:53.440000
 So if I brought up my browser and in
 my browser, I said, Hey, give me

0:12:53.440000 --> 0:12:55.560000
 the website of 3333.

0:12:55.560000 --> 0:12:57.980000
 Let me see the web page
 that 333 is hosting.

0:12:57.980000 --> 0:13:04.460000
 The laptop would say, well, he compared
 his source address of 1111 with

0:13:04.460000 --> 0:13:06.600000
 the destination address of 3333.

0:13:06.600000 --> 0:13:09.980000
 And he very quickly realized, Oh, you
 want me to talk to somebody who's

0:13:09.980000 --> 0:13:14.960000
 not on my network, who's not
 in this green box here.

0:13:14.960000 --> 0:13:18.440000
 Say, well, if I want to send packets
 to someone who's not on my network,

0:13:18.440000 --> 0:13:23.360000
 the only person I can send them to
 is my router, my default gateway.

0:13:23.360000 --> 0:13:27.920000
 So he would send his web browsing packets
 to the router saying, Hey, router,

0:13:27.920000 --> 0:13:30.980000
 can you forward these packets
 to 3333 for me?

0:13:30.980000 --> 0:13:33.160000
 Here's where we'd
 have the problem.

0:13:33.160000 --> 0:13:35.660000
 The router would get
 those packets.

0:13:35.660000 --> 0:13:39.800000
 He'd look at the destination address
 of 3333 and he'd say, Hmm, that's

0:13:39.800000 --> 0:13:42.880000
 not me. I don't have an
 IP address of 3333.

0:13:42.880000 --> 0:13:44.780000
 And he'd look around
 in his routing table.

0:13:44.780000 --> 0:13:48.080000
 I say, well, do I know
 how to get to 3333?

0:13:48.080000 --> 0:13:52.440000
 Right now his answer would be no,
 I don't know how to get there.

0:13:52.440000 --> 0:13:56.300000
 The only networks I know about are
 the networks that I live on.

0:13:56.300000 --> 0:14:00.200000
 I live on the 111 network and
 I live on the 222 network.

0:14:00.200000 --> 0:14:04.240000
 I have no idea where
 the 333 network is.

0:14:04.240000 --> 0:14:07.720000
 So I have to enable routing here.

0:14:07.720000 --> 0:14:12.980000
 I have to enable router one to learn
 about the 3333 network to know that

0:14:12.980000 --> 0:14:16.060000
 he goes to router
 two to get there.

0:14:16.060000 --> 0:14:20.080000
 And conversely, I need routers two and
 three to learn about these remote

0:14:20.080000 --> 0:14:24.040000
 networks. I need router two to
 learn about the 111 network.

0:14:24.040000 --> 0:14:27.220000
 Otherwise he won't be able
 to reply to those packets.

0:14:27.220000 --> 0:14:31.340000
 And router three, router three, the
 only network he knows about is a 333

0:14:31.340000 --> 0:14:34.580000
 network he needs to know
 about these other ones.

0:14:34.580000 --> 0:14:39.960000
 Now, if router three was really a web
 server, if it was really a computer

0:14:39.960000 --> 0:14:43.620000
 like my laptop, he wouldn't
 be doing routing.

0:14:43.620000 --> 0:14:48.720000
 Just like my laptop, he would have a
 default gateway saying, hey, to send

0:14:48.720000 --> 0:14:54.320000
 packets to anybody who's
 not 333, send it to 3332.

0:14:54.320000 --> 0:15:00.420000
 So because he's a router, I'm going to
 configure his default gateway with

0:15:00.420000 --> 0:15:02.220000
 what's called a static route.

0:15:02.220000 --> 0:15:10.100000
 So I'm just going to say IP route.


0:15:10.100000 --> 0:15:12.620000
 That means any packet where you
 don't know where it goes.

0:15:12.620000 --> 0:15:15.260000
 If you receive a packet, you have no
 idea where the destination goes,

0:15:15.260000 --> 0:15:18.540000
 send it to 3332.

0:15:18.540000 --> 0:15:22.880000
 That's like giving him a default gateway,
 but this is putting a route

0:15:22.880000 --> 0:15:24.440000
 in his routing table.

0:15:24.440000 --> 0:15:29.200000
 So that's all I need
 on the web server.

0:15:29.200000 --> 0:15:31.980000
 And what I'm going to do is I'm just going
 to enable routing between router

0:15:31.980000 --> 0:15:33.000000
 one and router two.

0:15:33.000000 --> 0:15:35.920000
 I'm just going to configure
 some routing protocol.

0:15:35.920000 --> 0:15:38.980000
 Let's configure RIP as an example.


0:15:38.980000 --> 0:15:42.180000
 And a routing protocol in case you're
 not familiar with that term, that's

0:15:42.180000 --> 0:15:45.880000
 a language that routers speak
 between each other.

0:15:45.880000 --> 0:15:49.580000
 Where router one can say, hey, router
 two, you and I both know about the

0:15:49.580000 --> 0:15:52.440000
 222 network because we
 sit on it, we share it.

0:15:52.440000 --> 0:15:55.340000
 But you probably don't know
 about the 111 network.

0:15:55.340000 --> 0:15:56.620000
 So let me tell you about it.

0:15:56.620000 --> 0:16:00.920000
 Router two, you can get to
 the 111 network through me.

0:16:00.920000 --> 0:16:02.420000
 The routing protocol will do that.


0:16:02.420000 --> 0:16:06.960000
 And similarly, router two will say,
 hey, thank you friend, by the way,

0:16:06.960000 --> 0:16:09.820000
 you probably don't know
 about the 333 network.

0:16:09.820000 --> 0:16:11.480000
 Let me tell you about that.

0:16:11.480000 --> 0:16:15.040000
 And hey, router one, you can get
 to that network through me.

0:16:15.040000 --> 0:16:18.540000
 So routing protocol is a way for these
 routers to dynamically speak to

0:16:18.540000 --> 0:16:21.320000
 each other and exchange routes.

0:16:21.320000 --> 0:16:23.340000
 So I'm just going to use RIP.

0:16:23.340000 --> 0:16:33.300000
 RIP is very simple to configure, so
 I'm going to go on a router one.

0:16:33.300000 --> 0:16:35.420000
 I'll say router RIP.

0:16:35.420000 --> 0:16:39.020000
 We'll use RIP version
 two, no auto summary.

0:16:39.020000 --> 0:16:43.580000
 It's all part of my CCNA stuff if
 you want to learn more about RIP.

0:16:43.580000 --> 0:16:50.560000
 And then I will just activate RIP on
 the 111 network and the 222 network.

0:16:50.560000 --> 0:17:00.460000
 So with RIP, all I have to do is
 network one and network two.

0:17:00.460000 --> 0:17:05.380000
 And then similarly, I'll go across
 to router two and do something the

0:17:05.380000 --> 0:17:15.080000
 same. Router RIP version
 two, no auto summary.

0:17:15.080000 --> 0:17:17.400000
 And he's connected
 to the two network.

0:17:17.400000 --> 0:17:24.820000
 And he's connected to this
 network right there.

0:17:24.820000 --> 0:17:30.540000
 And with that, I should now have
 end to end IP reachability.

0:17:30.540000 --> 0:17:34.940000
 Router two should now have learned
 via RIP about the 111 network.

0:17:34.940000 --> 0:17:37.100000
 Let's verify that.

0:17:37.100000 --> 0:17:43.680000
 And he did. He's got a RIP
 route to the 111 network.

0:17:43.680000 --> 0:17:53.720000
 And similarly, router one should
 know about the 333 network.

0:17:53.720000 --> 0:18:01.320000
 And he does. So as it stands right now,
 from my laptop, I should be able

0:18:01.320000 --> 0:18:06.580000
 to ping 333 and get a response.

0:18:06.580000 --> 0:18:10.380000
 Let's see if I can.

0:18:10.380000 --> 0:18:14.020000
 Where's my DOS prompt?

0:18:14.020000 --> 0:18:21.280000
 There it is. And I'm
 getting a reply.

0:18:21.280000 --> 0:18:27.040000
 Okay, one last step
 I need to do here.

0:18:27.040000 --> 0:18:32.040000
 I need to go into my router.

0:18:32.040000 --> 0:18:34.800000
 Where is that whiteboard?

0:18:34.800000 --> 0:18:40.500000
 Here we go. I need to go into router
 three and configure him to offer

0:18:40.500000 --> 0:18:44.300000
 a web page. By default, routers and
 switches, even though they have the

0:18:44.300000 --> 0:18:49.400000
 capability of offering a website so you
 can configure the router or switch

0:18:49.400000 --> 0:18:52.740000
 with a website, it doesn't
 do that by default.

0:18:52.740000 --> 0:18:57.160000
 So there are some lines of configuration
 commands I need to put in to

0:18:57.160000 --> 0:18:59.100000
 give him that ability.

0:18:59.100000 --> 0:19:08.100000
 So that being the case.

0:19:08.100000 --> 0:19:10.480000
 I'm going to go into router three.


0:19:10.480000 --> 0:19:16.060000
 Let's get out of this.

0:19:16.060000 --> 0:19:18.860000
 Which is my server.

0:19:18.860000 --> 0:19:28.760000
 The commands to do that are first
 of all, IP, HTTP server.

0:19:28.760000 --> 0:19:34.860000
 That says I want you to activate
 you for web serving service.

0:19:34.860000 --> 0:19:41.960000
 Now, the ITP HTTP server will only serve
 up a web page if someone authenticates

0:19:41.960000 --> 0:19:45.300000
 themselves. In other words, when my
 laptop tries to get to the web page

0:19:45.300000 --> 0:19:48.820000
 of this, my laptop is going to be presented
 with a username and password

0:19:48.820000 --> 0:19:53.820000
 prompt. So I have to configure the
 router here to know how to respond

0:19:53.820000 --> 0:19:57.260000
 to that. And there's a bunch
 of commands for that.

0:19:57.260000 --> 0:20:05.460000
 So this command right here is saying,
 okay, when someone provides you

0:20:05.460000 --> 0:20:08.620000
 the authentication credentials, when
 they provide you a username and a

0:20:08.620000 --> 0:20:11.380000
 password, look on yourself.

0:20:11.380000 --> 0:20:15.560000
 That username and password should be
 stored locally right here on you.

0:20:15.560000 --> 0:20:17.220000
 You don't have to go any further.

0:20:17.220000 --> 0:20:19.020000
 Okay, so where is it?

0:20:19.020000 --> 0:20:19.580000
 Let's create it.

0:20:19.580000 --> 0:20:26.340000
 Let's say username, Keith.

0:20:26.340000 --> 0:20:30.020000
 And Keith is going to be given access
 to privilege level 15 commands,

0:20:30.020000 --> 0:20:34.340000
 which means when Keith logs in via
 the web browser, he can access any

0:20:34.340000 --> 0:20:37.900000
 command that he would normally be able
 to access via the command line.

0:20:37.900000 --> 0:20:41.100000
 And Keith is going to have
 the password of Cisco.

0:20:41.100000 --> 0:20:43.680000
 All right, so there's a
 username and password.

0:20:43.680000 --> 0:20:48.560000
 So in this, in a real world, your network
 admin, you would provide a username

0:20:48.560000 --> 0:20:52.180000
 and password for the network
 admin at your company.

0:20:52.180000 --> 0:20:56.500000
 And then we're going to
 go AAA new dash model.

0:20:56.500000 --> 0:21:00.240000
 AAA authentication.

0:21:00.240000 --> 0:21:04.680000
 Login default local.

0:21:04.680000 --> 0:21:10.480000
 So this says when somebody tries to
 log in to the CLI of this router,

0:21:10.480000 --> 0:21:13.780000
 the default behavior
 is to look locally.

0:21:13.780000 --> 0:21:18.520000
 For the credentials.

0:21:18.520000 --> 0:21:27.420000
 And AAA authorization
 exec default local.

0:21:27.420000 --> 0:21:31.720000
 Not going to go into a lot of details
 of AAA because that's way above

0:21:31.720000 --> 0:21:34.800000
 and beyond the scope of
 this particular class.

0:21:34.800000 --> 0:21:38.740000
 So that should do it.

0:21:38.740000 --> 0:21:42.520000
 Now I should be able
 to go to my laptop.

0:21:42.520000 --> 0:21:46.400000
 Open up a browser.

0:21:46.400000 --> 0:21:53.200000
 Make this a little
 bit smaller here.

0:21:53.200000 --> 0:21:56.260000
 And in my browser, let me go
 ahead and zoom in on that.

0:21:56.260000 --> 0:22:01.500000
 I should be able to say HTTP colon colon
 three three three three three.

0:22:01.500000 --> 0:22:04.060000
 That is the router.

0:22:04.060000 --> 0:22:13.660000
 There we go. My username is Keith.


0:22:13.660000 --> 0:22:16.640000
 My password is Cisco.

0:22:16.640000 --> 0:22:18.660000
 And there we go.

0:22:18.660000 --> 0:22:22.180000
 I have full end-to-end
 network connectivity.

0:22:22.180000 --> 0:22:29.480000
 And right now I am
 on router three.

0:22:29.480000 --> 0:22:36.860000
 So I have built this
 network from scratch.

0:22:36.860000 --> 0:22:38.740000
 I have cabled it up.

0:22:38.740000 --> 0:22:41.080000
 We provide IP addresses.

0:22:41.080000 --> 0:22:43.180000
 Some minimal routing.

0:22:43.180000 --> 0:22:45.520000
 DHCP functionality.

0:22:45.520000 --> 0:22:48.480000
 Configured this router
 to act as a web server.

0:22:48.480000 --> 0:22:51.520000
 And we have verified that we have end
-to-end connectivity between the

0:22:51.520000 --> 0:22:57.040000
 laptop and the router.

0:22:57.040000 --> 0:23:02.920000
 Okay, well with that, I'll go
 ahead and bring us to a close.

0:23:02.920000 --> 0:23:05.300000
 Thank you very much
 for watching today.

0:23:05.300000 --> 0:23:09.220000
 And if you are going to pursue a Cisco
 certification, I wish you the best

0:23:09.220000 --> 0:23:12.960000
 of success. And feel free to reach out
 to me with any questions that you

0:23:12.960000 --> 0:23:15.540000
 might have. So thanks a lot.

