WEBVTT

0:00:07.080000 --> 0:00:11.200000
 This video is part of the CCT routing
 and switching curriculum.

0:00:11.200000 --> 0:00:14.740000
 It comes from section 4 of that curriculum
 and the title is identifying

0:00:14.740000 --> 0:00:20.100000
 loopback plugs. My name is Keith Bogart
 and I will be your instructor

0:00:20.100000 --> 0:00:23.600000
 for this video. This video is
 going to be really short.

0:00:23.600000 --> 0:00:27.200000
 We're going to be focusing just on one
 bullet point in section 4 of that

0:00:27.200000 --> 0:00:33.700000
 blueprint, which is identifying the
 correct different loopback plugs.

0:00:33.700000 --> 0:00:36.440000
 That's all we're going to do,
 identify loopback plugs.

0:00:36.440000 --> 0:00:39.400000
 So, first of all,
 loopback testing.

0:00:39.400000 --> 0:00:41.620000
 Why would we do loopback testing?

0:00:41.620000 --> 0:00:43.280000
 What problem is solved?

0:00:43.280000 --> 0:00:45.720000
 Well, I think this is a pretty
 self-explanatory right here.

0:00:45.720000 --> 0:00:49.440000
 Sometimes when you're troubleshooting
 line errors, in other words, nothing's

0:00:49.440000 --> 0:00:52.840000
 getting through this port or what's
 getting through is all garbage or

0:00:52.840000 --> 0:00:56.440000
 maybe the port isn't even coming up,
 you might have in your mind, okay,

0:00:56.440000 --> 0:00:57.960000
 could it be one of
 these three things?

0:00:57.960000 --> 0:01:01.480000
 Is it possible there's a problem
 with my local NIC card itself?

0:01:01.480000 --> 0:01:03.460000
 Maybe the hardware of
 the NIC is damaged.

0:01:03.460000 --> 0:01:05.880000
 Maybe some of the pins
 are bent or broken.

0:01:05.880000 --> 0:01:09.180000
 Maybe the internal wiring has separated
 from some of the pins.

0:01:09.180000 --> 0:01:13.900000
 Maybe you have an internal memory issue
 or error, something like that.

0:01:13.900000 --> 0:01:14.820000
 So I want to test that.

0:01:14.820000 --> 0:01:18.140000
 How do I test that my local
 NIC card is actually okay?

0:01:18.140000 --> 0:01:21.860000
 Is there a problem with the
 cable connected to my NIC?

0:01:21.860000 --> 0:01:24.680000
 Maybe you've, so how
 do you test that?

0:01:24.680000 --> 0:01:26.640000
 Is the problem with the
 telco's line equipment?

0:01:26.640000 --> 0:01:32.660000
 Okay, maybe it's not my NIC card or
 my wire going to the wall jack, but

0:01:32.660000 --> 0:01:35.000000
 maybe it's from the wall
 jack to the telco.

0:01:35.000000 --> 0:01:38.420000
 Maybe it's something in their line or
 maybe it's something at their end.

0:01:38.420000 --> 0:01:42.740000
 So by doing loopback testing, it
 can help answer these problems.

0:01:42.740000 --> 0:01:44.040000
 Now what's loopback testing?

0:01:44.040000 --> 0:01:45.440000
 Loopback testing is real simple.

0:01:45.440000 --> 0:01:50.400000
 It really just involves, normally when
 you transmit something, it goes

0:01:50.400000 --> 0:01:55.120000
 out the transmit pin of your NIC card
 along the transmit wire strand within

0:01:55.120000 --> 0:02:00.260000
 that cable. And eventually it hits
 like a receive pin somewhere else.

0:02:00.260000 --> 0:02:03.120000
 Like a receive pin maybe at the wall
 jack where that cable is connected

0:02:03.120000 --> 0:02:05.000000
 to, there's a receive pin there.

0:02:05.000000 --> 0:02:08.240000
 And then it goes out the transmit pin
 and hits the receive pin at the

0:02:08.240000 --> 0:02:10.860000
 telco's location.

0:02:10.860000 --> 0:02:13.720000
 Or if we're talking about two switches
 connected back to back.

0:02:13.720000 --> 0:02:18.760000
 Same thing, transmit pin on the RJ45
 jack goes to the transmit wire, which

0:02:18.760000 --> 0:02:23.460000
 ends up in the receive wire here and
 the receive pin in this NIC card.

0:02:23.460000 --> 0:02:26.420000
 So loopback testing is simply saying,
 look, I'm not going to allow my

0:02:26.420000 --> 0:02:29.620000
 signal to go all the
 way from end to end.

0:02:29.620000 --> 0:02:32.820000
 Somewhere in that process,
 I'm going to loop it back.

0:02:32.820000 --> 0:02:35.620000
 I'm going to loop
 it back to myself.

0:02:35.620000 --> 0:02:39.600000
 And if that's successful, I know that
 from here to the point where I did

0:02:39.600000 --> 0:02:42.520000
 the loopback, at least
 that part is okay.

0:02:42.520000 --> 0:02:46.260000
 The problem must be somewhere
 beyond where I did my test.

0:02:46.260000 --> 0:02:49.560000
 So there's a couple of different
 kinds of loopback tests.

0:02:49.560000 --> 0:02:54.020000
 The one that we see here on the top
 is what's called a soft loopback.

0:02:54.020000 --> 0:02:56.660000
 Not all interface types
 support this.

0:02:56.660000 --> 0:03:00.700000
 But if you get into your interface, if
 it supports some kind of a loopback

0:03:00.700000 --> 0:03:04.740000
 command, for example, if you go into
 an ethernet interface and you type

0:03:04.740000 --> 0:03:07.900000
 in loopback, you should see
 that's a supported command.

0:03:07.900000 --> 0:03:09.100000
 What's that doing?

0:03:09.100000 --> 0:03:13.100000
 That's internally within the software
 that's saying, okay, when I'm sending

0:03:13.100000 --> 0:03:16.520000
 something this nitcard,
 send it back to myself.

0:03:16.520000 --> 0:03:19.300000
 So you're not changing the hardware
 characteristics at all.

0:03:19.300000 --> 0:03:20.900000
 It's what's called a
 software loopback.

0:03:20.900000 --> 0:03:24.500000
 You're getting the software
 to talk to itself.

0:03:24.500000 --> 0:03:27.440000
 And then there's other types of tests
 which are called hard loopbacks

0:03:27.440000 --> 0:03:30.100000
 and telcoassisted loopbacks.

0:03:30.100000 --> 0:03:34.060000
 Now, for the purposes of this video, because
 we're talking about ultimately,

0:03:34.060000 --> 0:03:35.320000
 what's our objective here?

0:03:35.320000 --> 0:03:40.120000
 The objective in that bullet point
 is to identify loopback plugs.

0:03:40.120000 --> 0:03:43.780000
 Well, a loopback plug
 is a physical device.

0:03:43.780000 --> 0:03:46.300000
 And all we need to
 do is identify it.

0:03:46.300000 --> 0:03:49.620000
 So we're going to be talking
 about hard loopbacks here.

0:03:49.620000 --> 0:03:51.680000
 Now, let me take a step
 back for a moment.

0:03:51.680000 --> 0:03:56.880000
 This video is for the CCT routing
 and switching exam.

0:03:56.880000 --> 0:03:58.540000
 Why is that important?

0:03:58.540000 --> 0:04:02.040000
 Well, because it says identify loopback
 plugs, notice what it doesn't

0:04:02.040000 --> 0:04:07.320000
 say. The bullet point doesn't say, understand
 how to use loopback plugs,

0:04:07.320000 --> 0:04:11.200000
 understand the correct test to
 implement with a loopback plug.

0:04:11.200000 --> 0:04:15.140000
 So I'm making the assumption here that
 because it's saying identify loopback

0:04:15.140000 --> 0:04:19.540000
 plug, you are like a field engineer
 or something and you're going out

0:04:19.540000 --> 0:04:24.120000
 to a site and you're on the phone with
 the Cisco TAC or some other kind

0:04:24.120000 --> 0:04:28.540000
 of engineer, it's the Cisco TAC's responsibility
 to figure out what types

0:04:28.540000 --> 0:04:31.280000
 of tests to do to do
 the troubleshooting.

0:04:31.280000 --> 0:04:34.840000
 So you're out on site and they're telling
 you something like, okay, we're

0:04:34.840000 --> 0:04:36.300000
 going to need to do
 a loopback test.

0:04:36.300000 --> 0:04:40.380000
 I need you to find an RJ45 Ethernet
 loopback or I need you to find a T1

0:04:40.380000 --> 0:04:42.560000
 loopback or a fiber loopback.

0:04:42.560000 --> 0:04:46.500000
 So it's just simply your job to look
 in your bag of all your equipment

0:04:46.500000 --> 0:04:50.820000
 and pull out a plug that matches what
 they're asking for and plug it in

0:04:50.820000 --> 0:04:54.520000
 the port. It's not your job to implement
 the test or to know what test

0:04:54.520000 --> 0:04:58.080000
 has to be run. That's
 why it says identify.

0:04:58.080000 --> 0:05:02.120000
 So with the last three or four slides
 here, I just want to show you what

0:05:02.120000 --> 0:05:03.960000
 these loopback plugs look like.

0:05:03.960000 --> 0:05:07.040000
 So if you ever see pictures of them
 or if you have a bag full of these

0:05:07.040000 --> 0:05:09.920000
 plugs, you can identify
 one from another.

0:05:09.920000 --> 0:05:11.980000
 You can differentiate
 them from another.

0:05:11.980000 --> 0:05:14.140000
 All right, the first kind.

0:05:14.140000 --> 0:05:18.820000
 What if we need to perform a loopback,
 a hard loopback test on an RJ45

0:05:18.820000 --> 0:05:21.100000
 port of an Ethernet Nikkart?

0:05:21.100000 --> 0:05:23.920000
 All right, well here you see on the
 left, this is what the pin out is

0:05:23.920000 --> 0:05:24.820000
 going to have to be.

0:05:24.820000 --> 0:05:28.780000
 So you can see pin one is going to be
 loopback to pin three, pin two is

0:05:28.780000 --> 0:05:30.560000
 going to be loopback to pin six.

0:05:30.560000 --> 0:05:34.120000
 And so your actual plug will look
 somewhat like on the right.

0:05:34.120000 --> 0:05:38.460000
 You want to make sure that the pin
 outs, that the wires are correctly

0:05:38.460000 --> 0:05:41.480000
 looped back to each other
 like you see here.

0:05:41.480000 --> 0:05:46.600000
 So that's what an RJ45 Ethernet
 loopback plug looks like.

0:05:46.600000 --> 0:05:51.000000
 Well, what if I have a fast or gigabit
 Ethernet interface that's doing

0:05:51.000000 --> 0:05:53.740000
 fiber? It's not doing RJ45.

0:05:53.740000 --> 0:05:56.920000
 Well, there are loopback
 plugs for that too.

0:05:56.920000 --> 0:06:00.880000
 You can see here the whole concept
 is going to be the same across the

0:06:00.880000 --> 0:06:05.360000
 board. Whatever's being transmitted
 is loopback to the receive and other

0:06:05.360000 --> 0:06:09.100000
 transmit pins have to be loopback
 to other receive pins.

0:06:09.100000 --> 0:06:12.740000
 So here we see a fiber
 loopback connector.

0:06:12.740000 --> 0:06:16.060000
 Main thing to remember here is that
 there's different kinds of fiber.

0:06:16.060000 --> 0:06:19.380000
 There's single mode fiber
 and multi mode fiber.

0:06:19.380000 --> 0:06:22.480000
 So ensure that whatever loopback plug
 you're selecting is appropriate

0:06:22.480000 --> 0:06:23.820000
 for the fiber interface.

0:06:23.820000 --> 0:06:27.580000
 So you should know, okay, this switch
 port or this router interface, which

0:06:27.580000 --> 0:06:31.120000
 is fiber, is supporting multi
 mode fiber, single mode fiber.

0:06:31.120000 --> 0:06:33.740000
 So I need to get a loopback
 plug that supports that.

0:06:33.740000 --> 0:06:38.520000
 There are some adapters that are both
 that support both single mode fiber

0:06:38.520000 --> 0:06:40.700000
 and multi mode fiber
 in one adapter.

0:06:40.700000 --> 0:06:43.080000
 So just make sure you
 do the correct type.

0:06:43.080000 --> 0:06:47.700000
 And the last one, actually
 no, there's two more.

0:06:47.700000 --> 0:06:51.980000
 What about a T1 loopback plug?

0:06:51.980000 --> 0:06:56.980000
 T1's typically plug into jacks that look
 very similar to RJ45, but they're

0:06:56.980000 --> 0:07:02.660000
 called RJ48C. So visually they look similar,
 but the pin out is different.

0:07:02.660000 --> 0:07:07.760000
 So you can see here on the left this for
 an RJ48C, this is what your loopback

0:07:07.760000 --> 0:07:09.620000
 pin out needs to look like.

0:07:09.620000 --> 0:07:12.800000
 And if this is of interest to you,
 you might want to pause this video

0:07:12.800000 --> 0:07:16.800000
 and write down that pin out and memorize
 that, you know, pin five goes

0:07:16.800000 --> 0:07:19.560000
 to pin two, pin one
 goes to pin four.

0:07:19.560000 --> 0:07:23.060000
 And then you see there on the right
 an example of what that type of plug

0:07:23.060000 --> 0:07:24.680000
 might look like.

0:07:24.680000 --> 0:07:28.500000
 Once again, a lot of these loopback
 plugs you can purchase, but a lot

0:07:28.500000 --> 0:07:30.880000
 of websites I've seen people
 have just made their own.

0:07:30.880000 --> 0:07:35.840000
 They just taken a cable, cut off the end,
 stripped some of the outer sheath

0:07:35.840000 --> 0:07:39.280000
 and just twisted the wires together
 themselves might just be cheaper and

0:07:39.280000 --> 0:07:41.440000
 easier for you to do it that way.

0:07:41.440000 --> 0:07:46.400000
 And the last type I want to talk about
 is an RS-232 serial cable loopback.

0:07:46.400000 --> 0:07:50.580000
 And as we know, RS-232 comes in
 many different form factors.

0:07:50.580000 --> 0:07:52.200000
 Here we see a couple of them.

0:07:52.200000 --> 0:07:56.400000
 So we see what the DB9
 loopback looks like.

0:07:56.400000 --> 0:08:00.180000
 And we see what the DB25
 loopback looks like.

0:08:00.180000 --> 0:08:05.620000
 Main point, main takeaway from all
 this stuff is to memorize what pin

0:08:05.620000 --> 0:08:08.060000
 is connected to what other pin.

0:08:08.060000 --> 0:08:11.500000
 Because sometimes when you're visually
 looking at the plug, you won't

0:08:11.500000 --> 0:08:12.360000
 be able to tell.

0:08:12.360000 --> 0:08:15.080000
 There might not be any indicator on there
 that's a loopback plug and you'll

0:08:15.080000 --> 0:08:18.220000
 have to take something off and actually
 look at how the wires are connected

0:08:18.220000 --> 0:08:22.720000
 to know if it is truly
 indeed a loopback plug.

0:08:22.720000 --> 0:08:26.120000
 And for the purposes of the exam, they'll
 probably want you to know that

0:08:26.120000 --> 0:08:29.300000
 this pin connects to this pin and this
 pin connects to this pin if we're

0:08:29.300000 --> 0:08:34.040000
 talking about T1 versus
 RJ45 on Ethernet.

0:08:34.040000 --> 0:08:37.880000
 So that concludes this video on
 identifying loopback plugs.

